Alongside moving to certbot's nginx plugin, also use conf.d instead of
recreating the sites-{available,enabled} setup that Debian/Ubuntu uses.
Furthermore, also request a certificate for the media domain at the same
time since that's now required.
The API parameter is not a timestamp but an offset.
If a sufficient amount of time passes between the tests
expires_at calculation and the internal calculation during processing
of the request the strict equality assertion fails. (Either a direct
assertion or indirect via job lookup).
To avoid this lower comparison granularity.
literally nothing uses C2S AP, and it's another route into core
systems which requires analysis and maintenance. A second API
is just extra surface for potentially bad things so let's take
it out back and obliterate it
by default just prevent job floods with a 1-seconds
uniqueness check, but override in RemoteFetcherWorker
for 5 minute uniqueness check over all states
:infinity is an option we can go for maybe at some point,
but that would prevent any refetches so maybe not idk.
We were overzealous with matching on a raw error from the object fetch that should have never been relied on like this. If we can't fetch successfully we should assume that the collection is private.
Building a more expressive and universal error struct to match on may be something to consider.
These tests relied on the removed Fetcher.fetch_object_from_id!/2 function injecting the error tuple into a log message with the exact words "Object containment failed."
We will keep this behavior by generating a similar log message, but perhaps this should do a better job of matching on the error tuple returned by Transmogrifier.handle_incoming/1
"id" is used for the canonical link to the AS2 representation of an object.
"url" is typically used for the canonical link to the HTTP representation.
It is what we use, for example, when following the "external source" link
in the frontend. However, it's not the link we include in the post contents
for quote posts.
Using URL instead means we include a more user-friendly URL for Mastodon,
and a working (in the browser) URL for Threads
ci/woodpecker/push/lint Pipeline was successfulDetails
ci/woodpecker/push/test Pipeline was successfulDetails
ci/woodpecker/push/build-amd64 Pipeline was successfulDetails
ci/woodpecker/push/build-arm64 Pipeline was successfulDetails
ci/woodpecker/push/docs Pipeline was successfulDetails
previously we would uncritically take data and format it into
tags for static-fe and the like - however, instances can be
configured to disallow unauthenticated access to these resources.
this means that OG tags as a vector for information leakage.
_technically_ this should only occur if you have both
restrict_unauthenticated *AND* you run static-fe, which makes no
sense since static-fe is for unauthenticated people in particular,
but hey ho.
This brings it in line with its documentation and akkoma-fe’s
expectations. For backwards compatibility URL parameters are still
accept with lower priority. Unfortunately this means duplicating
parameters and descriptions in the API spec.
Usually Plug already pre-merges parameters from different sources into
the plain 'params' parameter which then gets forwarded by Phoenix.
However, OpenApiSpex 3.x prevents this; 4.x is set to change this
https://github.com/open-api-spex/open_api_spex/issues/334https://github.com/open-api-spex/open_api_spex/issues/92
Fixes: #691
Fixes: #722
Per the XRD specification:
> 2.4. Element <Alias>
>
> The <Alias> element contains a URI value that is an additional
> identifier for the resource described by the XRD. This value
> MUST be an absolute URI. The <Alias> element does not identify
> additional resources the XRD is describing, **but rather provides
> additional identifiers for the same resource.**
(http://docs.oasis-open.org/xri/xrd/v1.0/os/xrd-1.0-os.html#element.alias, emphasis mine)
In other words, the alias list is expected to link to things which are
not just semantically the same, but exactly the same. Old user accounts
don't do that
This change should not pose a compatibility issue: Mastodon does not
list old accounts here (See e1fcb02867/app/serializers/webfinger_serializer.rb (L12))
The use of as:alsoKnownAs is also not quite semantically right here
(see https://www.w3.org/TR/did-core/#dfn-alsoknownas, which defines
it to be used to refer to identifiers which are interchangable) but
that's what DID get for reusing a property definition that Mastodon
already squatted long before they got to it
The newest git HEAD of MIME already knows about APNG, but this
hasn’t been released yet. Without this, APNG attachments from
remote posts won’t display as images in frontends.
Fixes: akkoma#657
This protects us from falling for obvious spoofs as from the current
upload exploit (unfortunately we can’t reasonably do anything about
spoofs with exact matches as was possible via emoji and proxy).
Such objects being invalid is supported by the spec, sepcifically
sections 3.1 and 3.2: https://www.w3.org/TR/activitypub/#obj-id
Anonymous objects are not relevant here (they can only exists within
parent objects iiuc) and neither is client-to-server or transient objects
(as those cannot be fetched in the first place).
This leaves us with the requirement for `id` to (a) exist and
(b) be a publicly dereferencable URI from the originating server.
This alone does not yet demand strict equivalence, but the spec then
further explains objects ought to be fetchable _via their ID_.
Meaning an object not retrievable via its ID, is invalid.
This reading is supported by the fact, e.g. GoToSocial (recently) and
Mastodon (for 6+ years) do already implement such strict ID checks,
additionally proving this doesn’t cause federation issues in practice.
However, apart from canonical IDs there can also be additional display
URLs. *omas first redirect those to their canonical location, but *keys
and Mastodon directly serve the AP representation without redirects.
Mastodon and GTS deal with this in two different ways,
but both constitute an effective countermeasure:
- Mastodon:
Unless it already is a known AP id, two fetches occur.
The first fetch just reads the `id` property and then refetches from
the id. The last fetch requires the returned id to exactly match the
URL the content was fetched from. (This can be optimised by skipping
the second fetch if it already matches)
05eda8d193/app/helpers/jsonld_helper.rb (L168)63f0979799
- GTS:
Only does a single fetch and then checks if _either_ the id
_or_ url property (which can be an object) match the original fetch
URL. This relies on implementations always including their display URL
as "url" if differing from the id. For actors this is true for all
investigated implementations, for posts only Mastodon includes an
"url", but it is also the only one with a differing display URL.
2bafd7daf5 (diff-943bbb02c8ac74ac5dc5d20807e561dcdfaebdc3b62b10730f643a20ac23c24fR222)
Albeit Mastodon’s refetch offers higher compatibility with theoretical
implmentations using either multiple different display URL or not
denoting any of them as "url" at all, for now we chose to adopt a
GTS-like refetch-free approach to avoid additional implementation
concerns wrt to whether redirects should be allowed when fetching a
canonical AP id and potential for accidentally loosening some checks
(e.g. cross-domain refetches) for one of the fetches.
This may be reconsidered in the future.
Since we always followed redirects (and until recently allowed fuzzy id
matches), the ap_id of the received object might differ from the iniital
fetch url. This lead to us mistakenly trying to insert a new user with
the same nickname, ap_id, etc as an existing user (which will fail due
to uniqueness constraints) instead of updating the existing one.
Since we reject cross-domain redirects, this doesn’t yet
make a difference, but it’s requried for stricter checking
subsequent commits will introduce.
To make sure (and in case we ever decide to reallow
cross-domain redirects) also use the final location
for containment and reachability checks.
In order to properly process incoming notes we need
to be able to map the key id back to an actor.
Also, check collections actually belong to the same server.
Key ids of Hubzilla and Bridgy samples were updated to what
modern versions of those output. If anything still uses the
old format, we would not be able to verify their posts anyway.
If it’s not already in the database,
it must be counterfeit (or just not exists at all)
Changed test URLs were only ever used from "local: false" users anyway.
This brings it in line with its name and closes an,
in practice harmless, verification hole.
This was/is the only user of contain_origin making it
safe to change the behaviour on actor-less objects.
Until now refetched objects did not ensure the new actor matches the
domain of the object. We refetch polls occasionally to retrieve
up-to-date vote counts. A malicious AP server could have switched out
the poll after initial posting with a completely different post
attribute to an actor from another server.
While we indeed fell for this spoof before the commit,
it fortunately seems to have had no ill effect in practice,
since the asociated Create activity is not changed. When exposing the
actor via our REST API, we read this info from the activity not the
object.
This at first thought still keeps one avenue for exploit open though:
the updated actor can be from our own domain and a third server be
instructed to fetch the object from us. However this is foiled by an
id mismatch. By necessity of being fetchable and our longstanding
same-domain check, the id must still be from the attacker’s server.
Even the most barebone authenticity check is able to sus this out.
Such redirects on AP queries seem most likely to be a spoofing attempt.
If the object is legit, the id should match the final domain anyway and
users can directly use the canonical URL.
The lack of such a check (and use of the initially queried domain’s
authority instead of the final domain) was enabling the current exploit
to even affect instances which already migrated away from a same-domain
upload/proxy setup in the past, but retained a redirect to not break old
attachments.
(In theory this redirect could, with some effort, have been limited to
only old files, but common guides employed a catch-all redirect, which
allows even future uploads to be reachable via an initial query to the
main domain)
Same-domain redirects are valid and also used by ourselves,
e.g. for redirecting /notice/XXX to /objects/YYY.
Turns out we already had a test for activities spoofed via upload due
to an exploit several years. Back then *oma did not verify content-type
at all and doing so was the only adopted countermeasure.
Even the added test sample though suffered from a mismatching id, yet
nobody seems to have thought it a good idea to tighten id checks, huh
Since we will add stricter id checks later, make id and URL match
and also add a testcase for no content type at all. The new section
will be expanded in subsequent commits.
No new path traversal attacks are known. But given the many entrypoints
and code flow complexity inside pack.ex, it unfortunately seems
possible a future refactor or addition might reintroduce one.
Furthermore, some old packs might still contain traversing path entries
which could trigger undesireable actions on rename or delete.
To ensure this can never happen, assert safety during path construction.
Path.safe_relative was introduced in Elixir 1.14, but
fortunately, we already require at least 1.14 anyway.
To save on bandwith and avoid OOMs with large files.
Ofc, this relies on the remote server
(a) sending a content-length header and
(b) being honest about the size.
Common fedi servers seem to provide the header and (b) at least raises
the required privilege of an malicious actor to a server infrastructure
admin of an explicitly allowed host.
A more complete defense which still works when faced with
a malicious server requires changes in upstream Finch;
see https://github.com/sneako/finch/issues/224
Certain attacks rely on predictable paths for their payloads.
If we weren’t so overly lax in our (id, URL) check, the current
counterfeit activity exploit would be one of those.
It seems plausible for future attacks to hinge on
or being made easier by predictable paths too.
In general, letting remote actors place arbitrary data at
a path within our domain of their choosing (sans prefix)
just doesn’t seem like a good idea.
Using fully random filenames would have worked as well, but this
is less friendly for admins checking emoji dirs.
The generated suffix should still be more than enough;
an attacker needs on average 140 trillion attempts to
correctly guess the final path.
This will decouple filenames from shortcodes and
allow more image formats to work instead of only
those included in the auto-load glob. (Albeit we
still saved other formats to disk, wasting space)
Furthermore, this will allow us to make
final URL paths infeasible to predict.
Since 3 commits ago we restrict shortcodes to a subset of
the POSIX Portable Filename Character Set, therefore
this can never have a directory component.
E.g. *key’s emoji URLs typically don’t have file extensions, but
until now we just slapped ".png" at its end hoping for the best.
Furthermore, this gives us a chance to actually reject non-images,
which before was not feasible exatly due to those extension-less URLs
As suggested in b387f4a1c1, only steal
emoji with alphanumerc, dash, or underscore characters.
Also consolidate all validation logic into a single function.
===
Taken from akkoma#703 with cosmetic tweaks
This matches our existing validation logic from Pleroma.Emoji,
and apart from excluding the dot also POSIX’s Portable Filename
Character Set making it always safe for use in filenames.
Mastodon is even stricter also disallowing U+002D HYPEN-MINUS
and requiring at least two characters.
Given both we and Mastodon reject shortcodes excluded
by this anyway, this doesn’t seem like a loss.
Even more than with user uploads, a same-domain proxy setup bears
significant security risks due to serving untrusted content under
the main domain space.
A risky setup like that should never be the default.
Just as with uploads and emoji before, this can otherwise be used
to place counterfeit AP objects or other malicious payloads.
In this case, even if we never assign a priviliged type to content,
the remote server can and until now we just mimcked whatever it told us.
Preview URLs already handle only specific, safe content types
and redirect to the external host for all else; thus no additional
sanitisiation is needed for them.
Non-previews are all delegated to the modified ReverseProxy module.
It already has consolidated logic for building response headers
making it easy to slip in sanitisation.
Although proxy urls are prefixed by a MAC built from a server secret,
attackers can still achieve a perfect id match when they are able to
change the contents of the pointed to URL. After sending an posts
containing an attachment at a controlled destination, the proxy URL can
be read back and inserted into the payload. After injection of
counterfeits in the target server the content can again be changed
to something innocuous lessening chance of detection.
By mapping all extensions related to our custom privileged types
back to innocuous text/plain, our custom types will never automatically
be inserted which was one of the factors making impersonation possible.
Note, this does not invalidate the upload and emoji Content-Type
restrictions from previous commits. Apart from counterfeit AP objects
there are other payloads with standard types this protects against,
e.g. *.js Javascript payloads as used in prior frontend injections.
Else malicious emoji packs or our EmojiStealer MRF can
put payloads into the same domain as the instance itself.
Sanitising the content type should prevent proper clients
from acting on any potential payload.
Note, this does not affect the default emoji shipped with Akkoma
as they are handled by another plug. However, those are fully trusted
and thus not in needed of sanitisation.
This actually was already intended before to eradict all future
path-traversal-style exploits and to fix issues with some
characters like akkoma#610 in 0b2ec0ccee. However, Dedupe and
AnonymizeFilename got mixed up. The latter only anonymises the name
in Content-Disposition headers GET parameters (with link_name),
_not_ the upload path.
Even without Dedupe, the upload path is prefixed by an UUID,
so it _should_ already be hard to guess for attackers. But now
we actually can be sure no path shenanigangs occur, uploads
reliably work and save some disk space.
While this makes the final path predictable, this prediction is
not exploitable. Insertion of a back-reference to the upload
itself requires pulling off a successfull preimage attack against
SHA-256, which is deemed infeasible for the foreseeable futures.
Dedupe was already included in the default list in config.exs
since 28cfb2c37a, but this will get overridde by whatever the
config generated by the "pleroma.instance gen" task chose.
Upload+delete tests running in parallel using Dedupe might be flaky, but
this was already true before and needs its own commit to fix eventually.
The lack thereof enables spoofing ActivityPub objects.
A malicious user could upload fake activities as attachments
and (if having access to remote search) trick local and remote
fedi instances into fetching and processing it as a valid object.
If uploads are hosted on the same domain as the instance itself,
it is possible for anyone with upload access to impersonate(!)
other users of the same instance.
If uploads are exclusively hosted on a different domain, even the most
basic check of domain of the object id and fetch url matching should
prevent impersonation. However, it may still be possible to trick
servers into accepting bogus users on the upload (sub)domain and bogus
notes attributed to such users.
Instances which later migrated to a different domain and have a
permissive redirect rule in place can still be vulnerable.
If — like Akkoma — the fetching server is overly permissive with
redirects, impersonation still works.
This was possible because Plug.Static also uses our custom
MIME type mappings used for actually authentic AP objects.
Provided external storage providers don’t somehow return ActivityStream
Content-Types on their own, instances using those are also safe against
their users being spoofed via uploads.
Akkoma instances using the OnlyMedia upload filter
cannot be exploited as a vector in this way — IF the
fetching server validates the Content-Type of
fetched objects (Akkoma itself does this already).
However, restricting uploads to only multimedia files may be a bit too
heavy-handed. Instead this commit will restrict the returned
Content-Type headers for user uploaded files to a safe subset, falling
back to generic 'application/octet-stream' for anything else.
This will also protect against non-AP payloads as e.g. used in
past frontend code injection attacks.
It’s a slight regression in user comfort, if say PDFs are uploaded,
but this trade-off seems fairly acceptable.
(Note, just excluding our own custom types would offer no protection
against non-AP payloads and bear a (perhaps small) risk of a silent
regression should MIME ever decide to add a canonical extension for
ActivityPub objects)
Now, one might expect there to be other defence mechanisms
besides Content-Type preventing counterfeits from being accepted,
like e.g. validation of the queried URL and AP ID matching.
Inserting a self-reference into our uploads is hard, but unfortunately
*oma does not verify the id in such a way and happily accepts _anything_
from the same domain (without even considering redirects).
E.g. Sharkey (and possibly other *keys) seem to attempt to guard
against this by immediately refetching the object from its ID, but
this is easily circumvented by just uploading two payloads with the
ID of one linking to the other.
Unfortunately *oma is thus _both_ a vector for spoofing and
vulnerable to those spoof payloads, resulting in an easy way
to impersonate our users.
Similar flaws exists for emoji and media proxy.
Subsequent commits will fix this by rigorously sanitising
content types in more areas, hardening our checks, improving
the default config and discouraging insecure config options.
The default refresh interval of 1 day is woefully inadequate here;
users expect to be able to add the alias to their new account and
press the move button on their old account and have it work.
This allows callers to specify a maximum age before a refetch is
triggered. We set that to 5s for the move code, as a nice compromise
between Making Things Work and ensuring that this can't be used
to hammer a remote server
Currently translated at 18.1% (183 of 1006 strings)
Translated using Weblate (Polish)
Currently translated at 6.6% (67 of 1006 strings)
Co-authored-by: Weblate <noreply@weblate.org>
Co-authored-by: subtype <subtype@hollow.capital>
Translate-URL: http://translate.akkoma.dev/projects/akkoma/akkoma-backend-config-descriptions/pl/
Translation: Pleroma fe/Akkoma Backend (Config Descriptions)
This will crop them to a square matching behaviour of Husky and *key
and allowing us to never worry about consistent alignment.
Note, akkoma-fe instead displays the full image with inserted spacing.
Mastodon at the very least seems to prevent the creation of emoji with
dots in their name (and refuses to accept them in federation). It feels
like being cautious in what we accept is reasonable here.
Colons are the emoji separator and so obviously should be blocked.
Perhaps instead of filtering out things like this we should just
do a regex match on `[a-zA-Z0-9_-]`? But that's plausibly a decision
for another day
Perhaps we should also have a centralised "is this a valid emoji shortcode?"
function
ci/woodpecker/pr/lint Pipeline was successfulDetails
ci/woodpecker/pr/test Pipeline was successfulDetails
ci/woodpecker/pr/build-amd64 Pipeline was successfulDetails
ci/woodpecker/pr/build-arm64 Pipeline was successfulDetails
ci/woodpecker/pr/docs Pipeline was successfulDetails
This partly reverts 1d884fd914
while fixing both the issue it addressed and the issue it caused.
The above commit successfully fixed OpenGraph metadata tags
which until then always showed the user bio instead of post content
by handing the activities AP ID as url to the Metadata builder
_instead_ of passing the internal ID as activity_id.
However, in doing so the commit instead inflicted this very problem
onto Twitter metadata tags which ironically are used by akkoma-fe.
This is because while the OpenGraph builder wants an URL as url,
the Twitter builder needs the internal ID to build the URL to the
embedded player for videos and has no URL property.
Thanks to twpol for tracking down this root cause in #644.
Now, once identified the problem is simple, but this simplicity
invites multiple possible solutions to bikeshed about.
1. Just pass both properties to the builder and let them pick
2. Drop the url parameter from the OpenGraph builder and instead
a) build static-fe URL of the post from the ID (like Twitter)
b) use the passed-in object’s AP ID as an URL
Approach 2a has the disadvantage of hardcoding the expected URL outside
the router, which will be problematic should it ever change.
Approach 2b is conceptually similar to how the builder works atm.
However, the og:url is supposed to be a _permanent_ ID, by changing it
we might, afaiui, technically violate OpenGraph specs(?). (Though its
real-world consequence may very well be near non-existent.)
This leaves just approach 1, which this commit implements.
Albeit it too is not without nits to pick, as it leaves the metadata
builders with an inconsistent interface.
Additionally, this will resolve the subotpimal Discord previews for
content-less image posts reported in #664.
Discord already prefers OpenGraph metadata, so it’s mostly unaffected.
However, it appears when encountering an explicitly empty OpenGraph
description and a non-empty Twitter description, it replaces just the
empty field with its Twitter counterpart, resulting in the user’s bio
slipping into the preview.
Secondly, regardless of any OpenGraph tags, Discord uses twitter:card to
decide how prominently images should be, but due to the bug the card
type was stuck as "summary", forcing images to always remain small.
Root cause identified by: twpol
Fixes: #644
Fixes: #664
fixed up some grammer / wording. removed a setence and made wording more in line with what I could find in Admin-FE (especially wording of "rejecting" vs. dropping)
This vastly reduces idle CPU usage, which should generally be beneficial
for most small-to-medium sized instances.
Additionally update the documentation to specify how to override the vm.args
file for OTP installs
This fixes an oversight in e99e2407f3
which added background_removal as a possible SimplePolicy setting.
However, it did _not_ add a default value to the base config and
as it turns out instance_list doesn’t handle unset options well.
In effect this caused federating instances with SimplePolicy enabled
but background_removal not explicitly configured to always trip up for
outgoing account updates in check_background_removal (and incoming
updates from Sharkey).
For added ""fun"" this error was able to block account updates made
e.g. via /api/v1/accounts/update_credentials.
Tests were unaffected since they explicitly override
all relevant config options.
Set a default to avoid all this
(note to self: don’t forget next time, baka!)
Currently our own frontend doesn’t show backgrounds of other users, this
property is already publicly readable via REST API and likely was always
intended to be shown and federated.
Recently Sharkey added support for profile backgrounds and
immediately made them federate and be displayed to others.
We use the same AP field as Sharkey here which should make
it interoperable both ways out-of-the-box.
Ref.: 4e64397635
Fixes misspelling and omission of and example in commit
0cfd5b4e89 which added the
status_ttl_property. This was the only place this commit
referred to the property as note_ttl_days.
Partially fixes the omitted schema update of the instance metadata addition
from commit b7e8ce2350. A proper full schema
for nodeinfo is still missing.
OTP’s default SSL/TLS settings are rather restricitive
and in particular do not use system CA certs.
In our case using system CA certs is virtually always desired
and the lack of it leads to non-obvious errors. Manually configuring
system CA certs from in-database config also isn’t straightforward.
Furthermore, gen_smtp uses a different set of connection options
for direct SSL/TLS and a later TLS upgrade providing additional
confusion and complexity in how to configure this.
Thus provide some suitable defaults for sending SMTP emails.
Everything can still be overriden by admins if necessary.
Note: defaults are not appended when validating the config
in hopes of improving the error message (as the required relay key
is already accessed to generate defaults for optional fields)
Fixes: #660
With kilobyte the resulting numbers got too large and were cut off
in the charts, making them useless. However, even an idle Akkoma
server’s memory usage is in the lower hundreths of megabytes, so
we don’t need this much precision to begin with for the dashboard.
Other metric users might prefer base units and can handle scaling in a
smarter way, so keep this configurable.
The spec was copied from another endpoint, including the operation id,
leading to scrubbing the valid parameters from the request and simply
not working.
the previous code passed a state parameter to ueberauth with info
about where to go after the user logged in, etc.
since ueberauth 0.7, this parameter is ignored and oauth state is used
for actual CSRF reasons.
we now set a cookie with the state we need to keep track of, and read
it once the callback happens.
Implements the preferences endpoint in the Mastodon API, but returns
default values for most of the preferences right now. The only supported
preference we can access is default post visibility, and a relevant test
is added as well.
Currently, Akkoma sorts by published date first before everything else.
This however makes search results pretty bad since Meilisearch uses a
bucket sort algorithm in order of the ranking rules specified:
https://www.meilisearch.com/docs/learn/core_concepts/relevancy#behavior
Since the `published` attribute is a unix timestamp, the resulting
buckets are pretty small so the other rules essentially have little to
no effect on the rankings of search results.
This fixes that issue by moving the `published:desc` rule further down
so it still sorts by date, but only after considering everything else.
AFAIK attribute and sort doesn't really affect results for Akkoma since
the only attribute considered is the `content` attribute and the `sort`
parameter isn't used in Akkoma searches. Everything else is made to
match more closely to Meilisearch's defaults.
The docker-compose.yml file is likely to be edited quite extensively by
admins when setting up an instance. This would likely cause problems
when dealing with updating Akkoma as merge conflicts would likely occur.
Docker-compose already has the ability to use override files in addition
to the main `docker-compose.yml` file. Admins can instead put any
overrides (additional volumes, container for elasticsearch, etc.) into a
file that won't be tracked by git and thus won't run into merge
conflicts in the future. In particular, the
`docker-compose.override.yml` will be checked by docker compose in
addition to the main file if it exists and override definitions from the
latter with the former.
OTP builds to 1.15
Changelog entry
Ensure policies are fully loaded
Fix :warn
use main branch for linkify
Fix warn in tests
Migrations for phoenix 1.17
Revert "Migrations for phoenix 1.17"
This reverts commit 6a3b2f15b7.
Oban upgrade
Add default empty whitelist
mix format
limit test to amd64
OTP 26 tests for 1.15
use OTP_VERSION tag
baka
just 1.15
Massive deps update
Update locale, deps
Mix format
shell????
multiline???
?
max cases 1
use assert_recieve
don't put_env in async tests
don't async conn/fs tests
mix format
FIx some uploader issues
Fix tests
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
Here we make it a generic placeholder which should make accidental copy-pasting of this command happen less.
We also had one case of someone who got errors because the SHELL variable wasn't set. This is the case for Alpine.
Here I added a line to fill it in when not set.
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
Commit 11ec9daa5b (released with 3.2.0)
added the fedibird frontend and tweaked and extended Mastodon API for
compatibility with it. Document these changes.
Set it to `inline` because the vast majority of what's sent is multimedia
content while `attachment` would have the side-effect of triggering a
download dialog.
Closes: https://git.pleroma.social/pleroma/pleroma/-/issues/3114
TwitterCard meta tags are supposed to use the attributes "name" and "content".
OpenGraph tags use the attributes "property" and "content".
Twitter itself is smart enough to detect broken meta tags and discover the TwitterCard
using "property" and "content", but other platforms that only implement parsing of TwitterCards
and not OpenGraph may fail to correctly detect the tags as they're under the wrong attributes.
> "Open Graph protocol also specifies the use of property and content attributes for markup while
> Twitter cards use name and content. Twitter’s parser will fall back to using property and content,
> so there is no need to modify existing Open Graph protocol markup if it already exists." [0]
[0] https://developer.twitter.com/en/docs/twitter-for-websites/cards/guides/getting-started
`context` fields for objects and activities can now be generated based
on the object/activity `inReplyTo` field or its ActivityPub ID, as a
fallback method in cases where `context` fields are missing for incoming
activities and objects.
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
This is useful for people who want to migrate back to Pleroma.
It's also added in the docs, but also noted that this is barely tested and to be used at their own risk.
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
A recent group of vulnerabilities have been found in Pleroma (and
inherited by Akkoma) that involve media files either uploaded by local
users or proxied from remote instances (if media proxy is enabled).
It is recommended that media files are served on a separate subdomain
in order to mitigate this class of vulnerabilities.
Based on https://meta.akkoma.dev/t/another-vector-for-the-injection-vulnerability-found/483/2
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
When doing prune_objects, it's possible that bookmarked objects are deleted.
This gave problems when fetching the bookmark TL.
Here we clean up the bookmarks during pruning in the case were it's possible that bookmarked objects are deleted.
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
This make the behavior consistent between when UserNote doesn't exist and when comment is null.
The current behavior may return null in APIs, which misleads some clients doing feature detection into thinking the server does not support comments.
For example, see https://codeberg.org/husky/husky/issues/92
ci/woodpecker/pr/woodpecker Pipeline was successfulDetails
weird values in href will cause base64 encoding to fail later down the
line, so let's make sure the value we're passing on is somewhat sane, or
at the very least a binary
this fixes#482
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
When no image description is filled in, Pleroma allowed fallbacks.
Those were (based on a setting) either the filename, or a fixed description.
Neither are good options for image descriptions imo, so here we remove this.
Note that there's two tests removed who supposedly tested something else.
But examining closer, they didn't seem to test what they claimed to test,
so I removed them rather than try to "fix" them.
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
Expose quote posting in the api as a feature.
Copies what the quote post PR for pleroma does to allow external clients to enable and disable features based on the feature-set of the instance.
As far as I am aware, akkoma doesn't allow you to disable quote posting, so this doesn't need anything fancy and it's just a hard on switch.
I tried to get one for the bubble tl to work also, but I'm not quite sure how to do it so that it switches off the feature when the bubble tl is disabled. I would argue that it could and ideally should be done as well though.
I also discovered a pretty tame bug in the testing of it, that deleting the DB entry for the bubble tl does not stop the bubble TL from actually working and it will continue to display the panel on the about page, I'll just leave it as a note here.
Reviewed-on: #496
Co-authored-by: foxing <foxing@noreply.akkoma>
Co-committed-by: foxing <foxing@noreply.akkoma>
E.g. Flag activities have an array of objects
We prune the activity when NONE of the objects can be found
Note that the cost of finding and deleting these is ~4x higher than finding and deleting the non-array ones
Only string:
Delete on activities (cost=506573.48..506580.38 rows=0 width=0)
Only Array:
Delete on activities (cost=3570359.68..4276365.34 rows=0 width=0)
(They are still executed separately, so the total cost is the sum of the two)
We add an option to also prune remote activities who don't have existing objects any more they reference.
Rn, we only check for activities who only reference one object, not an array or embeded object.
By default Postgresql first restores the data and then the indexes when dumping and restoring the database.
Restoring index activities_visibility_index took a very long time.
users_ap_id_COALESCE_follower_address_index was later added because having this could speed up the restoration tremendously.
The problem now is that restoration apparently happens in alphabetical order, so this new index wasn't created yet
by the time activities_visibility_index needed it.
There were several work-arounds which included more complex steps during backup/restore.
By renaming this index, it should be restored first and thus activities_visibility_index can make use of it.
This speeds up restoration significantly without requiring more complex or unexpected steps from people.
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
I added info about installing front ends from the development branch
I also rearanged the list of exceptions (what's different than "normal" installation)
so the order is closer to how you'd encounter things in the installation docs + small fixes
This should help mitigate negative impacts related to block-retaliation
and block-circumvention when blocks become visible to the blocked party.
Instances interested in broadcasting blocks can turn this on if they
wish. This should have always been the default.
See also: AkkomaGang/akkoma-fe#274
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
Docs used to be a separate repo who cloned pleroma and pelroma-fe.
Now the docs are just the BE docs and completely part of the Akkoma repo.
I moved back to using venv because that's what I used and cleaner imo since it keeps everything nice in the repo.
(Iirc virtualenv stored things in the Home folder or smthng)
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
Credit where credit is due; I inspired myself by looking at the yunohost docs
* https://yunohost.org/en/dev
* https://yunohost.org/en/packaging_apps_start
I try to be inviting to new developers and guide them in their first steps into Akkoma development.
I try to keep the page itself as short as possible and link to relevant places.
That way people can quickly skim over parts that they don't need, while people who do need more can simply follow the links.
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
I experienced that it may be better to tell pgtune you have lower resoures than what you have when you have other services running.
I added that now.
I also moved the examples as part of the pgtune section.
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
This adds an option to the prune_objects mix task.
The original way deleted all non-local public posts older than a certain time frame.
Here we add a different query which you can call using the option --keep-threads.
We query from the activities table all context id's where
1. the newest activity with this context is still old
2. none of the activities with this context is is local
3. none of the activities with this context is bookmarked
and delete all objects with these contexts.
The idea is that posts with local activities (posts, replies, likes, repeats...) may be interesting to keep.
Besides that, a post lives in a certain context (the thread), so we keep the whole thread as well.
Caveats:
* ~~Quotes have a different context. Therefore, when someone quotes a post, it's possible the quoted post will still be deleted.~~ fixed in #379
* Although undocumented (in docs/docs/administration/CLI_tasks/database.md/#prune-old-remote-posts-from-the-database), the 'normal' delete action still kept old remote non-public posts. I added an option to keep this behaviour, but this also means that you now have to explicitly provide that option. **This could be considered a breaking change!**
* ~~Note that this removes from the objects table, but not from the activities.~~ See #427 for that.
Some statistics from explain analyse:
(cost=1402845.92..1933782.00 rows=3810907 width=62) (actual time=2562455.486..2562455.495 rows=0 loops=1)
Planning Time: 505.327 ms
Trigger for constraint chat_message_references_object_id_fkey: time=651939.797 calls=921740
Trigger for constraint deliveries_object_id_fkey: time=52036.009 calls=921740
Trigger for constraint hashtags_objects_object_id_fkey: time=20665.778 calls=921740
Execution Time: 3287933.902 ms
***
**TODO**
1. [x] **Question:** Is it OK to keep it like this in regard to quote posts? If not (ie post quoted by local users should also be kept), should we give quotes the same context as the post they are quoting? (If we don't want to give them the same context, I'll have to see how/if I can do it without being too costly)
* See #379
2. [x] **Question:** the "original" query only deletes public posts (this is undocumented, but you can check the code). This new one doesn't care for scope. From the docs I get that the idea is that posts can be refetched when needed. But I have from a trusted source that Pleroma can't refetch non-public posts. I assume that's the reason why they are kept here. I see different options to deal with this
1. ~~We keep it as currently implemented and just don't care about scope with this option~~
2. ~~We add logic to not delete non-public posts either (I'll have to see how costly that becomes)~~
3. We add an extra --keep-non-public parameter. This is technically speaking breakage (you didn't have to provide a param before for this, now you do), but I'm inclined to not care much because it wasn't documented nor tested in the first place.
3. [x] See if we can do the query using Elixir
4. [x] Test on a bigger DB to see that we don't run into a timeout
5. [x] Add docs
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: #350
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
Some users post posts with spoofed timestamp, and some clients will have issues with certain dates. Tusky for example crashes if the date is any sooner than 1 BCE (“year zero” in the representation).
I limited the range of what is considered a valid date to be somewhere between the years 1583 and 9999 (inclusive).
The numbers have been chosen because:
- ISO 8601 only allows years before 1583 with “mutual agreement”
- Years after 9999 could cause issues with certain clients as well
Co-authored-by: Charlotte 🦝 Delenk <lotte@chir.rs>
Reviewed-on: #425
Co-authored-by: darkkirb <lotte@chir.rs>
Co-committed-by: darkkirb <lotte@chir.rs>
ci/woodpecker/push/woodpecker Pipeline was successfulDetails
Faced with this issue today, Pleroma responds with status 400 (Bad request) if Exiftool.StripLocation is added to the list of filter modules for uploads. Here is logs:
```
13:27:25.201 [info] POST /api/v1/media
13:27:25.232 request_id=FzdspaAnrA6cyv0APgVR [error] Elixir.Pleroma.Upload.Filter: Filter Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation failed: {:error, "Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation: %ErlangError{original: :enoent}"}
13:27:25.232 request_id=FzdspaAnrA6cyv0APgVR [error] Elixir.Pleroma.Upload store (using Pleroma.Uploaders.Local) failed: "Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation: %ErlangError{original: :enoent}"
```
# This fix solves this problem.
Reviewed-on: #421
Co-authored-by: ihor <ikandreew@gmail.com>
Co-committed-by: ihor <ikandreew@gmail.com>
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
See #350 (comment)
When making quotes through Mast-API, they will now have the same context as the quoted post. This also results in them being showed when fetching the thread. I checked Misskey to see how it's there, and they show the quotes there as well, see e.g. <https://mk.toast.cafe/notes/98u1g0tulg>.
An example from Akkoma:
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: #379
Reviewed-by: floatingghost <hannah@coffee-and-dreams.uk>
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
ci/woodpecker/push/woodpecker Pipeline was successfulDetails
I managed to steal some emoji, but I had to figure out the specifics the hard way. This should make it easier for future criminals.
Feel free to close if this documentation was omitted on purpose, I can imagine some reasons for why it might have.
Co-authored-by: timorl <timorl@disroot.org>
Reviewed-on: #364
Co-authored-by: timorl <timorl+akkomadev@disroot.org>
Co-committed-by: timorl <timorl+akkomadev@disroot.org>
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
Since Akkoma doesn't include precompiled frontends in the main repo anymore, it doesn't make sense to keep treating the few js/css files remaining as binary files.
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
Argos Translate is a Python module for translation and can be used as a command line tool.
This is also the engine for LibreTranslate, for which we already have a module.
Here we can use the engine directly from our server without doing requests to a third party or having to install our own LibreTranslate webservice (obviously you do have to install Argos Translate).
One thing that's currently still missing from Argos Translate is auto-detection of languages (see <https://github.com/argosopentech/argos-translate/issues/9>). For now, when no source language is provided, we just return the text unchanged, supposedly translated from the target language. That way you get a near immediate response in pleroma-fe when clicking Translate, after which you can select the source language from a dropdown.
Argos Translate also doesn't seem to handle html very well. Therefore we give admins the option to strip the html before translating. I made this an option because I'm unsure if/how this will change in the future.
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: #351
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
this didn't actually _do_ anything in the past,
the users would be prevented from accessing the resource,
but they shouldn't be able to even create them
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
This makes them consistent with the update instructions that are in the
release announcements.
Also adds in the command to update the frontend as well.
Co-authored-by: Francis Dinh <normandy@biribiri.dev>
Reviewed-on: #361
Co-authored-by: Norm <normandy@biribiri.dev>
Co-committed-by: Norm <normandy@biribiri.dev>
Until now it was returning a 500 because the upload plug were going
through the changeset and ending in the JSON encoder, which raised
because struct has to @derive the encoder.
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
It's unclear why this is the default as this is highly not recommended.
KillMode=process ends up leaving leftover orphaned processes that
escape resource management and process lifecycles, wasting resources
on servers.
Signed-off-by: r3g_5z <june@girlboss.ceo>
Objects who got updated would just pass through several of the MRF policies, undoing moderation in some situations.
In the relevant cases we now check not only for Create activities, but also Update activities.
I checked which ones checked explicitly on type Create using `grep '"type" => "Create"' lib/pleroma/web/activity_pub/mrf/*`.
The following from that list have not been changed:
* lib/pleroma/web/activity_pub/mrf/follow_bot_policy.ex
* Not relevant for moderation
* lib/pleroma/web/activity_pub/mrf/keyword_policy.ex
* Already had a test for Update
* lib/pleroma/web/activity_pub/mrf/object_age_policy.ex
* In practice only relevant when fetching old objects (e.g. through Like or Announce). These are always wrapped in a Create.
* lib/pleroma/web/activity_pub/mrf/reject_non_public.ex
* We don't allow changing scope with Update, so not relevant here
ci/woodpecker/pr/woodpecker Pipeline is pendingDetails
Objects who got updated would just pass the TagPolicy, undoing the moderation that was set in place for the Actor.
Now we check not only for Create activities, but also Update activities.
ci/woodpecker/push/woodpecker Pipeline was successfulDetails
makes static-fe look more like pleroma-fe, with the stylesheets matching pleroma-dark and pleroma-light based on `prefers-color-scheme`.
- [x] navbar
- [x] about sidebar
- [x] background image
- [x] statuses
- [x] "reply to" or "edited" tags
- [x] accounts
- [x] show more / show less
- [x] posts / with replies / media / followers / following
- [x] followers/following would require user card snippets
- [x] admin/bot indicators
- [x] attachments
- [x] nsfw attachments
- [x] fontawesome icons
- [x] clean up and sort css
- [x] add pleroma-light
- [x] replace hardcoded strings
also i forgot
- [x] repeated headers
how it looks + sneak peek at statuses:
Co-authored-by: Sol Fisher Romanoff <sol@solfisher.com>
Reviewed-on: #236
Co-authored-by: sfr <sol@solfisher.com>
Co-committed-by: sfr <sol@solfisher.com>
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
Mostly add how to speed up restoration by adding activities_visibility_index later. Also some small other improvements.
This is based on what I did on a Pleroma instance. I assume the activities_visibility_index taking so long is still true for Akkoma, but can't really test because I don't have a big enough Akkoma DB yet 🙃
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: #332
Reviewed-by: floatingghost <hannah@coffee-and-dreams.uk>
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
Only real change here is making MRF rejects log as debug instead of info (#234)
I don't know if it's the best way to do it, but it seems it's just MRF using this and almost always this is intended.
The rest are just minor docs changes and syncing the restricted nicknames stuff.
I compiled and ran my changes with Docker and they all work.
Co-authored-by: r3g_5z <june@terezi.dev>
Reviewed-on: #313
Co-authored-by: @r3g_5z@plem.sapphic.site <june@girlboss.ceo>
Co-committed-by: @r3g_5z@plem.sapphic.site <june@girlboss.ceo>
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
Close#304.
Notes:
- This patch was made on top of Pleroma develop, so I created a separate cachex worker for request signature actions, instead of Akkoma's instance cache. If that is a merge blocker, I can attempt to move logic around for that.
- Regarding the `has_request_signatures: true -> false` state transition: I think that is a higher level thing (resetting instance state on new instance actor key) which is separate from the changes relevant to this one.
Co-authored-by: Luna <git@l4.pm>
Reviewed-on: #312
Co-authored-by: @luna@f.l4.pm <akkoma@l4.pm>
Co-committed-by: @luna@f.l4.pm <akkoma@l4.pm>
ci/woodpecker/push/woodpecker Pipeline was successfulDetails
Changes follow_operation schema to use BooleanLike instead of :boolean so that strings like "0" and "1" (used by mastodon.py) can be accepted. Rest of file uses the same. For more info please see https://git.pleroma.social/pleroma/pleroma/-/issues/2999
(I'm also sending this here as I'm not hopeful about upstream not ignoring it)
Co-authored-by: ave <ave@ave.zone>
Reviewed-on: #301
Co-authored-by: ave <ave@noreply.akkoma>
Co-committed-by: ave <ave@noreply.akkoma>
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
- Drop Expect-CT
Expect-CT has been redundant since 2018 when Certificate Transparency became mandated and required for all CAs and browsers. This header is only implemented in Chrome and is now deprecated. HTTP header analysers do not check this anymore as this is enforced by default. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Expect-CT
- Raise HSTS to 2 years and explicitly preload
The longer age for HSTS, the better. Header analysers prefer 2 years over 1 year now as free TLS is very common using Let's Encrypt.
For HSTS to be fully effective, you need to submit your root domain (domain.tld) to https://hstspreload.org. However, a requirement for this is the "preload" directive in Strict-Transport-Security. If you do not have "preload", it will reject your domain.
- Drop X-Download-Options
This is an IE8-era header when Adobe products used to use the IE engine for making outbound web requests to embed webpages in things like Adobe Acrobat (PDFs). Modern apps are using Microsoft Edge WebView2 or Chromium Embedded Framework. No modern browser checks or header analyser check for this.
- Set base-uri to 'none'
This is to specify the domain for relative links (`<base>` HTML tag). pleroma-fe does not use this and it's an incredibly niche tag.
I use all of these myself on my instance by rewriting the headers with zero problems. No breakage observed.
I have not compiled my Elixr changes, but I don't see why they'd break.
Co-authored-by: r3g_5z <june@terezi.dev>
Reviewed-on: #294
Co-authored-by: @r3g_5z@plem.sapphic.site <june@terezi.dev>
Co-committed-by: @r3g_5z@plem.sapphic.site <june@terezi.dev>
ci/woodpecker/push/woodpecker Pipeline is pendingDetails
In addition to making the page refer to Akkoma instead of Pleroma, I've
also removed clients that were not updated in a year or more and updated
links to websites and the contact links of authors.
Also removed language that suggested these clients are in any way
"officially supported".
Co-authored-by: Francis Dinh <normandy@biribiri.dev>
Reviewed-on: #284
Co-authored-by: Norm <normandy@biribiri.dev>
Co-committed-by: Norm <normandy@biribiri.dev>
Thanks for taking the time to file this bug report! Please try to be as specific and detailed as you can, so we can track down the issue and fix it as soon as possible.
# General information
- type:dropdown
id:installation
attributes:
label:"Your setup"
description:"What sort of installation are you using?"
options:
- "OTP"
- "From source"
- "Docker"
validations:
required:true
- type:input
id:setup-details
attributes:
label:"Extra details"
description:"If installing from source or docker, please specify your distro or docker setup."
placeholder:"e.g. Alpine Linux edge"
- type:input
id:version
attributes:
label:"Version"
description:"Which version of Akkoma are you running? If running develop, specify the commit hash."
placeholder:"e.g. 2022.11, 4e4bd248"
- type:input
id:postgres
attributes:
label:"PostgreSQL version"
placeholder:"14"
validations:
required:true
- type:markdown
attributes:
value:"# The issue"
- type:textarea
id:attempt
attributes:
label:"What were you trying to do?"
validations:
required:true
- type:textarea
id:expectation
attributes:
label:"What did you expect to happen?"
validations:
required:true
- type:textarea
id:reality
attributes:
label:"What actually happened?"
validations:
required:true
- type:textarea
id:logs
attributes:
label:"Logs"
description:"Please copy and paste any relevant log output, if applicable."
render:shell
- type:dropdown
id:severity
attributes:
label:"Severity"
description:"Does this issue prevent you from using the software as normal?"
options:
- "I cannot use the software"
- "I cannot use it as easily as I'd like"
- "I can manage"
validations:
required:true
- type:checkboxes
id:searched
attributes:
label:"Have you searched for this issue?"
description:"Please double-check that your issue is not already being tracked on [the forums](https://meta.akkoma.dev) or [the issue tracker](https://akkoma.dev/AkkomaGang/akkoma/issues)."
options:
- label:"I have double-checked and have not found this issue mentioned anywhere."
value:"Thanks for taking the time to request a new feature! Please be as concise and clear as you can in your proposal, so we could understand what you're going for."
- type:textarea
id:idea
attributes:
label:"The idea"
description:"What do you think you should be able to do in Akkoma?"
validations:
required:true
- type:textarea
id:reason
attributes:
label:"The reasoning"
description:"Why would this be a worthwhile feature? Does it solve any problems? Have people talked about wanting it?"
validations:
required:true
- type:checkboxes
id:searched
attributes:
label:"Have you searched for this feature request?"
description:"Please double-check that your issue is not already being tracked on [the forums](https://meta.akkoma.dev), [the issue tracker](https://akkoma.dev/AkkomaGang/akkoma/issues), or the one for [pleroma-fe](https://akkoma.dev/AkkomaGang/pleroma-fe/issues)."
options:
- label:"I have double-checked and have not found this feature request mentioned anywhere."
- label:"This feature is related to the Akkoma backend specifically, and not pleroma-fe."
@ -4,6 +4,244 @@ All notable changes to this project will be documented in this file.
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
## Unreleased
## Added
- Support for [FEP-fffd](https://codeberg.org/fediverse/fep/src/branch/main/fep/fffd/fep-fffd.md) (proxy objects)
- Verified support for elixir 1.16
## Changed
- Inbound pipeline error handing was modified somewhat, which should lead to less incomprehensible log spam. Hopefully.
## Fixed
- Issue preventing fetching anything from IPv6-only instances
- Issue allowing post content to leak via opengraph tags despite :estrict\_unauthenticated being set
## 2024.03
## Added
- CLI tasks best-effort checking for past abuse of the recent spoofing exploit
- new `:mrf_steal_emoji, :download_unknown_size` option; defaults to `false`
## Changed
- `Pleroma.Upload, :base_url` now MUST be configured explicitly if used;
use of the same domain as the instance is **strongly** discouraged
- `:media_proxy, :base_url` now MUST be configured explicitly if used;
use of the same domain as the instance is **strongly** discouraged
- StealEmoji:
- now uses the pack.json format;
existing users must migrate with an out-of-band script (check release notes)
- only steals shortcodes recognised as valid
- URLs of stolen emoji is no longer predictable
- The `Dedupe` upload filter is now always active;
`AnonymizeFilenames` is again opt-in
- received AP data is sanity checked before we attempt to parse it as a user
- Uploads, emoji and media proxy now restrict Content-Type headers to a safe subset
- Akkoma will no longer fetch and parse objects hosted on the same domain
## Fixed
- Critical security issue allowing Akkoma to be used as a vector for
(depending on configuration) impersonation of other users or creation
of bogus users and posts on the upload domain
- Critical security issue letting Akkoma fall for the above impersonation
payloads due to lack of strict id checking
- Critical security issue allowing domains redirect to to pose as the initial domain
(e.g. with media proxy's fallback redirects)
- refetched objects can no longer attribute themselves to third-party actors
(this had no externally visible effect since actor info is read from the Create activity)
- our litepub JSON-LD schema is now served with the correct content type
- remote APNG attachments are now recognised as images
## Upgrade Notes
- As mentioned in "Changed", `Pleroma.Upload, :base_url`**MUST** be configured. Uploads will fail without it.
- Akkoma will refuse to start if this is not set.
- Same with media proxy.
## 2024.02
## Added
- Full compatibility with Erlang OTP26
- handling of GET /api/v1/preferences
- Akkoma API is now documented
- ability to auto-approve follow requests from users you are already following
- The SimplePolicy MRF can now strip user backgrounds from selected remote hosts
## Changed
- OTP builds are now built on erlang OTP26
- The base Phoenix framework is now updated to 1.7
- An `outbox` field has been added to actor profiles to comply with AP spec
- User profile backgrounds do now federate with other Akkoma instances and Sharkey
## Fixed
- Documentation issue in which a non-existing nginx file was referenced
- Issue where a bad inbox URL could break federation
- Issue where hashtag rel values would be scrubbed
- Issue where short domains listed in `transparency_obfuscate_domains` were not actually obfuscated
## 2023.08
## Added
- Added a new configuration option to the MediaProxy feature that allows the blocking of specific domains from using the media proxy or being explicitly allowed by the Content-Security-Policy.
- Please make sure instances you wanted to block media from are not in the MediaProxy `whitelist`, and instead use `blocklist`.
- `OnlyMedia` Upload Filter to simplify restricting uploads to audio, image, and video types
- ARM64 OTP builds
- Ubuntu22 builds are available for develop and stable
- other distributions are stable only
- Support for Elixir 1.15
- 1.14 is still supported
- OTP26 is currently "unsupported". It will probably work, but due to the way
it handles map ordering, the test suite will not pass for it as yet.
## Changed
- Alpine OTP builds are now from alpine 3.18, which is OpenSSLv3 compatible.
If you use alpine OTP builds you will have to update your local system.
- Debian OTP builds are now from a base of bookworm, which is OpenSSLv3 compatible.
If you use debian OTP builds you will have to update your local system to
bookworm (currently: stable).
- Ubuntu and debian builds are compatible again! (for now...)
- Blocks/Mutes now return from max ID to min ID, in line with mastodon.
- The AnonymizeFilename filter is now enabled by default.
## Fixed
- Deactivated users can no longer show up in the emoji reaction list
- Embedded posts can no longer bypass `:restrict\_unauthenticated`
- GET/HEAD requests will now work when requesting AWS-based instances.
## Security
- Add `no_new_privs` hardening to OpenRC and systemd service files
- XML parsers cannot load any entities (thanks @Mae@is.badat.dev!)
- Reduced permissions of config files and directories, distros requiring greater permissions like group-read need to pre-create the directories
## Removed
- Builds for debian oldstable (bullseye)
- If you are on oldstable you should NOT attempt to update OTP builds without
first updating your machine.
## 2023.05
## Added
- Custom options for users to accept/reject private messages
- options: everybody, nobody, people\_i\_follow
- MRF to reject notes from accounts newer than a given age
- this will have the side-effect of rejecting legitimate messages if your
post gets boosted outside of your local bubble and people your instance
does not know about reply to it.
## Fixed
- Support for `streams` public key URIs
- Bookmarks are cleaned up on DB prune now
## Security
- Fixed mediaproxy being a bit of a silly billy
## 2023.04
## Added
- Nodeinfo keys for unauthenticated timeline visibility
- Option to disable federated timeline
- Option to make the bubble timeline publicly accessible
- Ability to swap between installed standard frontends
- *mastodon frontends are still not counted as standard frontends due to the complexity in serving them correctly*.
### Upgrade Notes
- Elixir 1.14 is now required. If your distribution does not package this, you can
use [asdf](https://asdf-vm.com/). At time of writing, elixir 1.14.3 / erlang 25.3
is confirmed to work.
## 2023.03
## Fixed
- Allowed contentMap to be updated on edit
- Filter creation now accepts expires\_at
### Changed
- Restoring the database from a dump now goes much faster without need for work-arounds
- Misskey reaction matching uses `content` parameter now
### Added
- Extend the mix task `prune_objects` with option `--prune-orphaned-activities` to also prune orphaned activities, allowing to reclaim even more database space
### Removed
- Possibility of using the `style` parameter on `span` elements. This will break certain MFM parameters.
- Option for "default" image description.
## 2023.02
### Added
- Prometheus metrics exporting from `/api/v1/akkoma/metrics`
- Ability to alter http pool size
- Translation of statuses via ArgosTranslate
- Argon2 password hashing
- Ability to "verify" links in profile fields via rel=me
- Mix tasks to dump/load config to/from json for bulk editing
- Followed hashtag list at /api/v1/followed\_tags, API parity with mastodon
- Ability to set posting language in the post form, API parity with mastodon
- Ability to match domains in MRF by a trailing wildcard
- Legacy redirect from /api/pleroma/admin to /api/v1/pleroma/admin
- Legacy redirects from /api/pleroma to /api/v1/pleroma
- :crypt dependency
### Changed
- Return HTTP error 413 when uploading an avatar or banner that's above the configured upload limit instead of a 500.
- Non-admin users now cannot register `admin` scope tokens (not security-critical, they didn't work before, but you _could_ create them)
- Admin scopes will be dropped on create
- Rich media will now backoff for 20 minutes after a failure
- Quote posts are now considered as part of the same thread as the post they are quoting
- Extend the mix task `prune_objects` with options to keep more relevant posts
- Simplified HTTP signature processing
- Rich media will now hard-exit after 5 seconds, to prevent timeline hangs
- HTTP Content Security Policy is now far more strict to prevent any potential XSS/CSS leakages
- Follow requests are now paginated, matches mastodon API spec, so use the Link header to paginate.
### Fixed
- /api/v1/accounts/lookup will now respect restrict\_unauthenticated
- Unknown atoms in the config DB will no longer crash akkoma on boot
### Upgrade notes
- Ensure `config :tesla, :adapter` is either unset, or set to `{Tesla.Adapter.Finch, name: MyFinch}` in your .exs config
- Pleroma-FE will need to be updated to handle the new /api/v1/pleroma endpoints for custom emoji
## 2022.12
## Added
- Config: HTTP timeout options, :pool\_timeout and :receive\_timeout
- Added statistic gathering about instances which do/don't have signed fetches when they request from us
- Ability to set a default post expiry time, after which the post will be deleted. If used in concert with ActivityExpiration MRF, the expiry which comes _sooner_ will be applied.
- Regular task to prune local transient activities
- Task to manually run the transient prune job (pleroma.database prune\_task)
- Ability to follow hashtags
- Option to extend `reject` in MRF-Simple to apply to entire threads, where the originating instance is rejected
- Extra information to failed HTTP requests
## Changed
- MastoAPI: Accept BooleanLike input on `/api/v1/accounts/:id/follow` (fixes follows with mastodon.py)
- Relays from akkoma are now off by default
- NormalizeMarkup MRF is now on by default
- Follow/Block/Mute imports now spin off into *n* tasks to avoid the oban timeout
- Transient activities recieved from remote servers are no longer persisted in the database
- Overhauled static-fe view for logged-out users
- Blocked instances will now not be sent _any_ requests, even fetch ones that would get rejected by MRF anyhow
## Removed
- FollowBotPolicy
- Passing of undo/block into MRF
## Upgrade Notes
- If you have an old instance, you will probably want to run `mix pleroma.database prune_task` in the foreground to catch it up with the history of your instance.
## 2022.11
## Added
@ -12,7 +250,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
- Scraping of nodeinfo from remote instances to display instance info
- `requested_by` in relationships when the user has requested to follow you
## Changes
## Changed
- Follows no longer override domain blocks, a domain block is final
- Deletes are now the lowest priority to publish and will be handled after creates
- Domain blocks are now subdomain-matches by default
Currently, Pleroma offers bugfixes and security patches only for the latest minor release.
| Version | Support
|---------| --------
| 2.2 | Bugfixes and security patches
# Akkoma backend security handling
## Reporting a vulnerability
Please use confidential issues (tick the "This issue is confidential and should only be visible to team members with at least Reporter access." box when submitting) at our [bugtracker](https://git.pleroma.social/pleroma/pleroma/-/issues/new) for reporting vulnerabilities.
New releases are announced at [pleroma.social](https://pleroma.social/announcements/). All security releases are tagged with ["Security"](https://pleroma.social/announcements/tags/security/). You can be notified of them by subscribing to an Atom feed at <https://pleroma.social/announcements/tags/security/feed.xml>.
New releases and security issues are announced at
[meta.akkoma.dev](https://meta.akkoma.dev/c/releases) and
"Base URL for the uploads. Required if you use a CDN or host attachments under a different domain.",
"Base URL for the uploads. Required if you use a CDN or host attachments under a different domain - it is HIGHLY recommended that you **do not** set this to be the same as the domain akkoma is hosted on.",
suggestions:[
"https://cdn-host.com"
"https://media.akkoma.dev/media/"
]
},
%{
key::allowed_mime_types,
label:"Allowed MIME types",
type:{:list,:string},
description:
"List of MIME (main) types uploads are allowed to identify themselves with. Other types may still be uploaded, but will identify as a generic binary to clients. WARNING: Loosening this over the defaults can lead to security issues. Removing types is safe, but only add to the list if you are sure you know what you are doing.",
You don't need to build and test the docs as long as you make sure the syntax is correct. But in case you do want to build the docs, feel free to do so.
You'll need to install mkdocs for which you can check the [mkdocs installation guide](https://www.mkdocs.org/#installation). Generally it's best to install it using `pip`. You'll also need to install the correct dependencies.
```sh
# Make sure you're in the same directory as this README
# From the root of the Akkoma repo, you'll need to do
cd docs
### Example using a Debian based distro
# Optionally use a virtual environment
python3 -m venv venv
source venv/bin/activate
#### 1. Install pipenv and dependencies
# Install dependencies
pip install -r requirements.txt
```shell
pip install pipenv
pipenv sync
# Run an http server who rebuilds when files change
# Accessable on http://127.0.0.1:8000
mkdocs serve
# Build the docs
# The static html pages will have been created in the folder "site"
# You can serve them from a server by pointing your server software (nginx, apache...) to this location
mkdocs build
# To get out of the virtual environment, you do
deactivate
```
#### 2. (Optional) Activate the virtual environment
Since dependencies are installed in a virtual environment, you can't use them directly. To use them you should either prefix the command with `pipenv run`, or activate the virtual environment for current shell by executing `pipenv shell` once.
#### 3. Build the docs using the script
```shell
[pipenv run] make all
```
#### 4. Serve the files
A folder `site` containing the static html pages will have been created. You can serve them from a server by pointing your server software (nginx, apache...) to this location. During development, you can run locally with
```shell
[pipenv run] mkdocs serve
```
This handles setting up an http server and rebuilding when files change. You can then access the docs on <http://127.0.0.1:8000>
- `--vacuum` - run `VACUUM FULL` after the embedded objects are replaced with their references
## Prune old remote posts from the database
This will prune remote posts older than 90 days (configurable with [`config :pleroma, :instance, remote_post_retention_days`](../../configuration/cheatsheet.md#instance)) from the database, they will be refetched from source when accessed.
This will prune remote posts older than 90 days (configurable with [`config :pleroma, :instance, remote_post_retention_days`](../../configuration/cheatsheet.md#instance)) from the database. Pruned posts may be refetched in some cases.
!!! note
The disk space will only be reclaimed after a proper vacuum. By default Postgresql does this for you on a regular basis, but if your instance has been running for a long time and there are many rows deleted, it may be advantageous to use `VACUUM FULL` (e.g. by using the `--vacuum` option).
!!! danger
The disk space will only be reclaimed after `VACUUM FULL`. You may run out of disk space during the execution of the task or vacuuming if you don't have about 1/3rds of the database size free.
You may run out of disk space during the execution of the task or vacuuming if you don't have about 1/3rds of the database size free. Vacuum causes a substantial increase in I/O traffic, and may lead to a degraded experience while it is running.
=== "OTP"
@ -45,7 +47,11 @@ This will prune remote posts older than 90 days (configurable with [`config :ple
```
### Options
- `--vacuum` - run `VACUUM FULL` after the objects are pruned
- `--keep-threads` - Don't prune posts when they are part of a thread where at least one post has seen local interaction (e.g. one of the posts is a local post, or is favourited by a local user, or has been repeated by a local user...). It also wont delete posts when at least one of the posts in that thread is kept (e.g. because one of the posts has seen recent activity).
- `--keep-non-public` - Keep non-public posts like DM's and followers-only, even if they are remote.
- `--prune-orphaned-activities` - Also prune orphaned activities afterwards. Activities are things like Like, Create, Announce, Flag (aka reports)... They can significantly help reduce the database size.
- `--vacuum` - Run `VACUUM FULL` after the objects are pruned. This should not be used on a regular basis, but is useful if your instance has been running for a long time before pruning.
## Create a conversation for all existing DMs
@ -93,6 +99,9 @@ Can be safely re-run
## Vacuum the database
!!! note
By default Postgresql has an autovacuum deamon running. While the tasks described here can help in some cases, they shouldn't be needed on a regular basis. See [the Postgresql docs on vacuuming](https://www.postgresql.org/docs/current/sql-vacuum.html) for more information on this.
### Analyze
Running an `analyze` vacuum job can improve performance by updating statistics used by the query planner. **It is safe to cancel this.**
@ -159,3 +168,23 @@ Change `default_text_search_config` for database and (if necessary) text_search_
```
See [PostgreSQL documentation](https://www.postgresql.org/docs/current/textsearch-configuration.html) and `docs/configuration/howto_search_cjk.md` for more detail.
## Pruning old activities
Over time, transient `Delete` activities and `Tombstone` objects
can accumulate in your database, inflating its size. This is not ideal.
There is a periodic task to prune these transient objects,
but on first run this may take a while on older instances to catch up
This will download the latest build for the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`).
You can override any of the details. To install a Pleroma-FE build from a different URL, you could do this:
You can override any of the details. To install an Akkoma-FE build from a different URL, you could do this:
2. Go to the working directory of Akkoma (default is `/opt/akkoma`)
3. Run `sudo -Hu postgres pg_dump -d <akkoma_db> --format=custom -f </path/to/backup_location/akkoma.pgdump>` (make sure the postgres user has write access to the destination file)
4. Copy `akkoma.pgdump`, `config/prod.secret.exs`, `config/setup_db.psql` (if still available) and the `uploads` folder to your backup destination. If you have other modifications, copy those changes too.
3. Run[¹]`sudo -Hu postgres pg_dump -d akkoma --format=custom -f </path/to/backup_location/akkoma.pgdump>` (make sure the postgres user has write access to the destination file)
4. Copy `akkoma.pgdump`, `config/prod.secret.exs`[²], `config/setup_db.psql` (if still available) and the `uploads` folder to your backup destination. If you have other modifications, copy those changes too.
5. Restart the Akkoma service.
[¹]: We assume the database name is "akkoma". If not, you can find the correct name in your config files.
[²]: If you've installed using OTP, you need `config/config.exs` instead of `config/prod.secret.exs`.
## Restore/Move
1. Optionally reinstall Akkoma (either on the same server or on another server if you want to move servers).
2. Stop the Akkoma service.
3. Go to the working directory of Akkoma (default is `/opt/akkoma`)
4. Copy the above mentioned files back to their original position.
5. Drop the existing database and user if restoring in-place. `sudo -Hu postgres psql -c 'DROP DATABASE <akkoma_db>;';``sudo -Hu postgres psql -c 'DROP USER <akkoma_db>;'`
6. Restore the database schema and akkoma postgres role the with the original `setup_db.psql` if you have it: `sudo -Hu postgres psql -f config/setup_db.psql`.
Alternatively, run the `mix pleroma.instance gen` task again. You can ignore most of the questions, but make the database user, name, and password the same as found in your backup of `config/prod.secret.exs`. Then run the restoration of the akkoma role and schema with of the generated `config/setup_db.psql` as instructed above. You may delete the `config/generated_config.exs` file as it is not needed.
7. Now restore the Akkoma instance's data into the empty database schema: `sudo -Hu postgres pg_restore -d <akkoma_db> -v -1 </path/to/backup_location/akkoma.pgdump>`
8. If you installed a newer Akkoma version, you should run `mix ecto.migrate`[^1]. This task performs database migrations, if there were any.
5. Drop the existing database and user if restoring in-place[¹]. `sudo -Hu postgres psql -c 'DROP DATABASE akkoma;';``sudo -Hu postgres psql -c 'DROP USER akkoma;'`
6. Restore the database schema and akkoma role using either of the following options
* You can use the original `setup_db.psql` if you have it[²]: `sudo -Hu postgres psql -f config/setup_db.psql`.
* Or recreate the database and user yourself (replace the password with the one you find in the config file) `sudo -Hu postgres psql -c "CREATE USER akkoma WITH ENCRYPTED PASSWORD '<database-password-wich-you-can-find-in-your-config-file>'; CREATE DATABASE akkoma OWNER akkoma;"`.
7. Now restore the Akkoma instance's data into the empty database schema[¹]: `sudo -Hu postgres pg_restore -d akkoma -v -1 </path/to/backup_location/akkoma.pgdump>`
8. If you installed a newer Akkoma version, you should run `MIX_ENV=prod mix ecto.migrate`[³]. This task performs database migrations, if there were any.
9. Restart the Akkoma service.
10. Run `sudo -Hu postgres vacuumdb --all --analyze-in-stages`. This will quickly generate the statistics so that postgres can properly plan queries.
11. If setting up on a new server configure Nginx by using the `installation/akkoma.nginx` config sample or reference the Akkoma installation guide for your OS which contains the Nginx configuration instructions.
[^1]: Prefix with `MIX_ENV=prod` to run it using the production config file.
[¹]: We assume the database name and user are both "akkoma". If not, you can find the correct name in your config files.
[²]: You can recreate the `config/setup_db.psql` by running the `mix pleroma.instance gen` task again. You can ignore most of the questions, but make the database user, name, and password the same as found in your backed up config file. This will also create a new `config/generated_config.exs` file which you may delete as it is not needed.
[³]: Prefix with `MIX_ENV=prod` to run it using the production config file.
## Remove
1. Optionally you can remove the users of your instance. This will trigger delete requests for their accounts and posts. Note that this is 'best effort' and doesn't mean that all traces of your instance will be gone from the fediverse.
* You can do this from the admin-FE where you can select all local users and delete the accounts using the *Moderate multiple users* dropdown.
* You can also list local users and delete them individualy using the CLI tasks for [Managing users](./CLI_tasks/user.md).
* You can also list local users and delete them individually using the CLI tasks for [Managing users](./CLI_tasks/user.md).
2. Stop the Akkoma service `systemctl stop akkoma`
3. Disable akkoma from systemd `systemctl disable akkoma`
3. Disable Akkoma from systemd `systemctl disable akkoma`
4. Remove the files and folders you created during installation (see installation guide). This includes the akkoma, nginx and systemd files and folders.
5. Reload nginx now that the configuration is removed `systemctl reload nginx`
6. Remove the database and database user `sudo -Hu postgres psql -c 'DROP DATABASE <akkoma_db>;';` `sudo -Hu postgres psql -c 'DROP USER <akkoma_db>;'`
6. Remove the database and database user[¹]`sudo -Hu postgres psql -c 'DROP DATABASE akkoma;';` `sudo -Hu postgres psql -c 'DROP USER akkoma;'`
7. Remove the system user `userdel akkoma`
8. Remove the dependencies that you don't need anymore (see installation guide). Make sure you don't remove packages that are still needed for other software that you have running!
[¹]: We assume the database name and user are both "akkoma". If not, you can find the correct name in your config files.
## Docker installations
If running behind Docker, it is required to run the above commands inside of a running database container.
### Example
Running `docker compose run --rm db pg_dump <...>` will fail and return:
```
pg_dump: error: connection to server on socket "/run/postgresql/.s.PGSQL.5432" failed: No such file or directory
Is the server running locally and accepting connections on that socket?"
```
However, first starting just the database container with `docker compose up db -d`, and then running `docker compose exec db pg_dump -d akkoma --format=custom -f </your/backup/dir/akkoma.pgdump>` will successfully generate a database dump.
Then to make the file accessible on the host system you can run `docker compose cp db:</your/backup/dir/akkoma.pgdump> </your/target/location>` to copy if from the container.
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/stable/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
Besides that, doing the following is generally enough:
## Switch to the akkoma user
```sh
# Using sudo
sudo -su akkoma
# Using doas
doas -su akkoma
# Using su
su -s "$SHELL" akkoma
```
## For OTP installations
```sh
# Download the new release
su akkoma -s $SHELL -lc "./bin/pleroma_ctl update"
# Download latest stable release
./bin/pleroma_ctl update --branch stable
# Migrate the database, you are advised to stop the instance before doing that
su akkoma -s $SHELL -lc "./bin/pleroma_ctl migrate"
# Stop akkoma
./bin/pleroma stop # or using the system service manager (e.g. systemctl stop akkoma)
# Run database migrations
./bin/pleroma_ctl migrate
# Start akkoma
./bin/pleroma daemon # or using the system service manager (e.g. systemctl start akkoma)
# Update frontend(s). See Frontend Configuration doc for more information.
[^1]: Depending on which install guide you followed (for example on Debian/Ubuntu), you want to run `git` and `mix` tasks as `akkoma` user by adding `sudo -Hu akkoma` before the command.
[^2]: Prefix with `MIX_ENV=prod` to run it using the production config file.
# Run with production configuration
export MIX_ENV=prod
# Download and compile dependencies
mix deps.get
mix compile
# Stop akkoma (replace with your system service manager's equivalent if different)
sudo systemctl stop akkoma
# Run database migrations
mix ecto.migrate
# Start akkoma (replace with your system service manager's equivalent if different)
sudo systemctl start akkoma
# Update Akkoma-FE frontend to latest stable. For other Frontends see Frontend Configuration doc for more information.
@ -33,7 +33,8 @@ To add configuration to your config file, you can copy it from the base config.
* `federation_incoming_replies_max_depth`: Max. depth of reply-to activities fetching on incoming federation, to prevent out-of-memory situations while fetching very long threads. If set to `nil`, threads of any depth will be fetched. Lower this value if you experience out-of-memory crashes.
* `federation_reachability_timeout_days`: Timeout (in days) of each external federation target being unreachable prior to pausing federating to it.
* `allow_relay`: Permits remote instances to subscribe to all public posts of your instance. This may increase the visibility of your instance.
* `public`: Makes the client API in authenticated mode-only except for user-profiles. Useful for disabling the Local Timeline and The Whole Known Network. Note that there is a dependent setting restricting or allowing unauthenticated access to specific resources, see `restrict_unauthenticated` for more details.
* `public`: Allows unauthenticated access to public resources on your instance. This is essentially used as the default value for `:restrict_unauthenticated`.
See `restrict_unauthenticated` for more details.
* `quarantined_instances`: *DEPRECATED* ActivityPub instances where activities will not be sent. They can still reach there via other means, we just won't send them.
* `allowed_post_formats`: MIME-type list of formats allowed to be posted (transformed into HTML).
* `extended_nickname_format`: Set to `true` to use extended local nicknames format (allows underscores/dashes). This will break federation with
@ -59,7 +60,9 @@ To add configuration to your config file, you can copy it from the base config.
* `cleanup_attachments`: Remove attachments along with statuses. Does not affect duplicate files and attachments without status. Enabling this will increase load to database when deleting statuses on larger instances.
* `show_reactions`: Let favourites and emoji reactions be viewed through the API (default: `true`).
* `password_reset_token_validity`: The time after which reset tokens aren't accepted anymore, in seconds (default: one day).
* `local_bubble`: Array of domains representing instances closely related to yours. Used to populate the `bubble` timeline. e.g `['example.com']`, (default: `[]`)
* `local_bubble`: Array of domains representing instances closely related to yours. Used to populate the `bubble` timeline. e.g `["example.com"]`, (default: `[]`)
* `languages`: List of Language Codes used by the instance. This is used to try and set a default language from the frontend. It will try and find the first match between the languages set here and the user's browser languages. It will default to the first language in this setting if there is no match.. (default `["en"]`)
* `export_prometheus_metrics`: Enable prometheus metrics, served at `/api/v1/akkoma/metrics`, requiring the `admin:metrics` oauth scope.
## :database
* `improved_hashtag_timeline`: Setting to force toggle / force disable improved hashtags timeline. `:enabled` forces hashtags to be fetched from `hashtags` table for hashtags timeline. `:disabled` forces object-embedded hashtags to be used (slower). Keep it `:auto` for automatic behaviour (it is auto-set to `:enabled` [unless overridden] when HashtagsTableMigrator completes).
@ -101,29 +104,60 @@ To add configuration to your config file, you can copy it from the base config.
## Message rewrite facility
### :mrf
* `policies`: Message Rewrite Policy, either one or a list. Here are the ones available by default:
* `Pleroma.Web.ActivityPub.MRF.DropPolicy`: Drops all activities. It generally doesn’t makes sense to use in production.
* `Pleroma.Web.ActivityPub.MRF.SimplePolicy`: Restrict the visibility of activities from certains instances (See [`:mrf_simple`](#mrf_simple)).
* `Pleroma.Web.ActivityPub.MRF.TagPolicy`: Applies policies to individual users based on tags, which can be set using pleroma-fe/admin-fe/any other app that supports Pleroma Admin API. For example it allows marking posts from individual users nsfw (sensitive).
* `Pleroma.Web.ActivityPub.MRF.SubchainPolicy`: Selectively runs other MRF policies when messages match (See [`:mrf_subchain`](#mrf_subchain)).
* `Pleroma.Web.ActivityPub.MRF.RejectNonPublic`: Drops posts with non-public visibility settings (See [`:mrf_rejectnonpublic`](#mrf_rejectnonpublic)).
* `Pleroma.Web.ActivityPub.MRF.EnsureRePrepended`: Rewrites posts to ensure that replies to posts with subjects do not have an identical subject and instead begin with re:.
* `Pleroma.Web.ActivityPub.MRF.AntiLinkSpamPolicy`: Rejects posts from likely spambots by rejecting posts from new users that contain links.
* `Pleroma.Web.ActivityPub.MRF.MediaProxyWarmingPolicy`: Crawls attachments using their MediaProxy URLs so that the MediaProxy cache is primed.
* `Pleroma.Web.ActivityPub.MRF.MentionPolicy`: Drops posts mentioning configurable users. (See [`:mrf_mention`](#mrf_mention)).
* `Pleroma.Web.ActivityPub.MRF.VocabularyPolicy`: Restricts activities to a configured set of vocabulary. (See [`:mrf_vocabulary`](#mrf_vocabulary)).
* `Pleroma.Web.ActivityPub.MRF.ObjectAgePolicy`: Rejects or delists posts based on their age when received. (See [`:mrf_object_age`](#mrf_object_age)).
* `Pleroma.Web.ActivityPub.MRF.ActivityExpirationPolicy`: Sets a default expiration on all posts made by users of the local instance. Requires `Pleroma.Workers.PurgeExpiredActivity` to be enabled for processing the scheduled delections.
* `Pleroma.Web.ActivityPub.MRF.ForceBotUnlistedPolicy`: Makes all bot posts to disappear from public timelines.
* `Pleroma.Web.ActivityPub.MRF.FollowBotPolicy`: Automatically follows newly discovered users from the specified bot account. Local accounts, locked accounts, and users with "#nobot" in their bio are respected and excluded from being followed.
* `Pleroma.Web.ActivityPub.MRF.AntiFollowbotPolicy`: Drops follow requests from followbots. Users can still allow bots to follow them by first following the bot.
* `Pleroma.Web.ActivityPub.MRF.KeywordPolicy`: Rejects or removes from the federated timeline or replaces keywords. (See [`:mrf_keyword`](#mrf_keyword)).
* `transparency`: Make the content of your Message Rewrite Facility settings public (via nodeinfo).
* `transparency_exclusions`: Exclude specific instance names from MRF transparency. The use of the exclusions feature will be disclosed in nodeinfo as a boolean value.
* `transparency_obfuscate_domains`: Show domains with `*` in the middle, to censor them if needed. For example, `ridingho.me` will show as `rid*****.me`
* `policies`: Message Rewrite Policy, either one or a list. Here are the ones available by default:
* `Pleroma.Web.ActivityPub.MRF.DropPolicy`: Drops all activities. It generally doesn’t makes sense to use in production.
* `Pleroma.Web.ActivityPub.MRF.ActivityExpirationPolicy`: Sets a default expiration on all posts made by users of the local instance. Requires `Pleroma.Workers.PurgeExpiredActivity` to be enabled for processing the scheduled delections.
(See [`:mrf_activity_expiration`](#mrf_activity_expiration))
* `Pleroma.Web.ActivityPub.MRF.AntiFollowbotPolicy`: Drops follow requests from followbots. Users can still allow bots to follow them by first following the bot.
* `Pleroma.Web.ActivityPub.MRF.AntiLinkSpamPolicy`: Rejects posts from likely spambots by rejecting posts from new users that contain links.
* `Pleroma.Web.ActivityPub.MRF.EnsureRePrepended`: Rewrites posts to ensure that replies to posts with subjects do not have an identical subject and instead begin with re:.
* `Pleroma.Web.ActivityPub.MRF.ForceBotUnlistedPolicy`: Makes all bot posts to disappear from public timelines.
* `Pleroma.Web.ActivityPub.MRF.HellthreadPolicy`: Blocks messages with too many mentions.
(See [`mrf_hellthread`](#mrf_hellthread))
* `Pleroma.Web.ActivityPub.MRF.KeywordPolicy`: Rejects or removes from the federated timeline or replaces keywords. (See [`:mrf_keyword`](#mrf_keyword)).
* `Pleroma.Web.ActivityPub.MRF.MediaProxyWarmingPolicy`: Crawls attachments using their MediaProxy URLs so that the MediaProxy cache is primed.
* `Pleroma.Web.ActivityPub.MRF.MentionPolicy`: Drops posts mentioning configurable users. (See [`:mrf_mention`](#mrf_mention)).
* `Pleroma.Web.ActivityPub.MRF.NoEmptyPolicy`: Drops local activities which have no actual content.
(e.g. no attachments and only consists of mentions)
* `Pleroma.Web.ActivityPub.MRF.NoPlaceholderTextPolicy`: Strips content placeholders from posts
(such as the dot from mastodon)
* `Pleroma.Web.ActivityPub.MRF.ObjectAgePolicy`: Rejects or delists posts based on their age when received. (See [`:mrf_object_age`](#mrf_object_age)).
* `Pleroma.Web.ActivityPub.MRF.RejectNewlyCreatedAccountNotesPolicy`: Rejects posts of users the server only recently learned about for a while. Great to block spam accounts. (See [`:mrf_reject_newly_created_account_notes`](#mrf_reject_newly_created_account_notes))
* `Pleroma.Web.ActivityPub.MRF.RejectNonPublic`: Drops posts with non-public visibility settings (See [`:mrf_rejectnonpublic`](#mrf_rejectnonpublic)).
* `Pleroma.Web.ActivityPub.MRF.SimplePolicy`: Restrict the visibility of activities from certains instances (See [`:mrf_simple`](#mrf_simple)).
* `Pleroma.Web.ActivityPub.MRF.StealEmojiPolicy`: Steals all eligible emoji encountered in posts from remote instances
(See [`:mrf_steal_emoji`](#mrf_steal_emoji))
* `Pleroma.Web.ActivityPub.MRF.SubchainPolicy`: Selectively runs other MRF policies when messages match (See [`:mrf_subchain`](#mrf_subchain)).
* `Pleroma.Web.ActivityPub.MRF.TagPolicy`: Applies policies to individual users based on tags, which can be set using pleroma-fe/admin-fe/any other app that supports Pleroma Admin API. For example it allows marking posts from individual users nsfw (sensitive).
* `Pleroma.Web.ActivityPub.MRF.UserAllowListPolicy`: Drops all posts except from users specified in a list.
(See [`:mrf_user_allowlist`](#mrf_user_allowlist))
* `Pleroma.Web.ActivityPub.MRF.VocabularyPolicy`: Restricts activities to a configured set of vocabulary. (See [`:mrf_vocabulary`](#mrf_vocabulary)).
Additionally the following MRFs will *always* be aplied and cannot be disabled:
* `Pleroma.Web.ActivityPub.MRF.DirectMessageDisabledPolicy`: Strips users limiting who can send them DMs from the recipients of non-eligible DMs
* `Pleroma.Web.ActivityPub.MRF.HashtagPolicy`: Depending on a post’s hashtags it can be rejected, get its sensitive flags force-enabled or removed from the global timeline
(See [`:mrf_hashtag`](#mrf_hashtag))
* `Pleroma.Web.ActivityPub.MRF.InlineQuotePolicy`: Append a link to a post that quotes another post with the link to the quoted post, to ensure that software that does not understand quotes can have full context.
(See [`:mrf_inline_quote`](#mrf_inline_quote))
* `Pleroma.Web.ActivityPub.MRF.NormalizeMarkup`: Pass inbound HTML through a scrubber to make sure it doesn't have anything unusual in it.
(See [`:mrf_normalize_markup`](#mrf_normalize_markup))
## Federation
### :activitypub
* `unfollow_blocked`: Whether blocks result in people getting unfollowed
* `outgoing_blocks`: Whether to federate blocks to other instances
* `blockers_visible`: Whether a user can see the posts of users who blocked them
* `deny_follow_blocked`: Whether to disallow following an account that has blocked the user in question
* `sign_object_fetches`: Sign object fetches with HTTP signatures
* `authorized_fetch_mode`: Require HTTP signatures for AP fetches
* `max_collection_objects`: The maximum number of objects to fetch from a remote AP collection.
### MRF policies
!!! note
@ -139,6 +173,7 @@ To add configuration to your config file, you can copy it from the base config.
* `report_removal`: List of instances to reject reports from and the reason for doing so.
* `avatar_removal`: List of instances to strip avatars from and the reason for doing so.
* `banner_removal`: List of instances to strip banners from and the reason for doing so.
* `background_removal`: List of instances to strip user backgrounds from and the reason for doing so.
* `reject_deletes`: List of instances to reject deletions from and the reason for doing so.
* `scrub_policy`: the scrubbing module to use (by default a built-in HTML sanitiser)
## Pleroma.User
@ -246,11 +288,11 @@ Notes:
### :frontend_configurations
This can be used to configure a keyword list that keeps the configuration data for any kind of frontend. By default, settings for `pleroma_fe` and `masto_fe` are configured. You can find the documentation for `pleroma_fe` configuration into [Pleroma-FE configuration and customization for instance administrators](https://docs-fe.akkoma.dev/stable/CONFIGURATION/#options).
This can be used to configure a keyword list that keeps the configuration data for any kind of frontend. By default, settings for `pleroma_fe` and `masto_fe` are configured. You can find the documentation for `pleroma_fe` configuration into [Akkoma-FE configuration and customization for instance administrators](https://docs-fe.akkoma.dev/stable/CONFIGURATION/#options).
Frontends can access these settings at `/api/v1/pleroma/frontend_configurations`
To add your own configuration for Pleroma-FE, use it like this:
To add your own configuration for Akkoma-FE, use it like this:
```elixir
config :pleroma, :frontend_configurations,
@ -356,7 +398,8 @@ This section describe PWA manifest instance-specific values. Currently this opti
## :media_proxy
* `enabled`: Enables proxying of remote media to the instance’s proxy
* `base_url`: The base URL to access a user-uploaded file. Useful when you want to proxy the media files via another host/CDN fronts.
* `base_url`: The base URL to access a user-uploaded file.
Using a (sub)domain distinct from the instance endpoint is **strongly** recommended.
* `proxy_opts`: All options defined in `Pleroma.ReverseProxy` documentation, defaults to `[max_body_length: (25*1_048_576)]`.
* `whitelist`: List of hosts with scheme to bypass the mediaproxy (e.g. `https://example.com`)
* `invalidation`: options for remove media from cache after delete object:
@ -452,7 +495,6 @@ This will make Akkoma listen on `127.0.0.1` port `8080` and generate urls starti
* ``enabled``: Whether the managed content security policy is enabled.
* ``sts``: Whether to additionally send a `Strict-Transport-Security` header.
* ``sts_max_age``: The maximum age for the `Strict-Transport-Security` header if sent.
* ``ct_max_age``: The maximum age for the `Expect-CT` header if sent.
* ``referrer_policy``: The referrer policy to use, either `"same-origin"` or `"no-referrer"`.
* ``report_uri``: Adds the specified url to `report-uri` and `report-to` group in CSP header.
@ -523,59 +565,13 @@ Available caches:
### :http
* `receive_timeout`: the amount of time, in ms, to wait for a remote server to respond to a request. (default: `15000`)
* `pool_timeout`: the amount of time, in ms, to wait to check out an HTTP connection from the pool. This likely does not need changing unless your instance is _very_ busy with outbound requests. (default `5000`)
* `proxy_url`: an upstream proxy to fetch posts and/or media with, (default: `nil`); for example `http://127.0.0.1:3192`. Does not support SOCKS5 proxy, only http(s).
* `send_user_agent`: should we include a user agent with HTTP requests? (default: `true`)
* `user_agent`: what user agent should we use? (default: `:default`), must be string or `:default`
You may want this pool max_connections to be at least equal to the number of federator jobs + retry queue jobs.
* `:media` for rich media, media proxy
* `:upload` for uploaded media (if using a remote uploader and `proxy_remote: true`)
For each pool, the options are:
* `max_connections` - how much connections a pool can hold
* `timeout` - retention duration for connections
### :connections_pool
*For `gun` adapter*
Settings for HTTP connection pool.
* `:connection_acquisition_wait` - Timeout to acquire a connection from pool.The total max time is this value multiplied by the number of retries.
* `connection_acquisition_retries` - Number of attempts to acquire the connection from the pool if it is overloaded. Each attempt is timed `:connection_acquisition_wait` apart.
* `:max_connections` - Maximum number of connections in the pool.
* `:connect_timeout` - Timeout to connect to the host.
* `:reclaim_multiplier` - Multiplied by `:max_connections` this will be the maximum number of idle connections that will be reclaimed in case the pool is overloaded.
### :pools
*For `gun` adapter*
Settings for request pools. These pools are limited on top of `:connections_pool`.
There are four pools used:
* `:federation` for the federation jobs. You may want this pool's max_connections to be at least equal to the number of federator jobs + retry queue jobs.
* `:media` - for rich media, media proxy.
* `:upload` - for proxying media when a remote uploader is used and `proxy_remote: true`.
* `:default` - for other requests.
For each pool, the options are:
* `:size` - limit to how much requests can be concurrently executed.
* `:recv_timeout` - timeout while `gun` will wait for response
* `:max_waiting` - limit to how much requests can be waiting for others to finish, after this is reached, subsequent requests will be dropped.
## Captcha
### Pleroma.Captcha
@ -604,12 +600,12 @@ the source code is here: [kocaptcha](https://github.com/koto-bank/kocaptcha). Th
* `uploader`: Which one of the [uploaders](#uploaders) to use.
* `filters`: List of [upload filters](#upload-filters) to use.
* `link_name`: When enabled Akkoma will add a `name` parameter to the url of the upload, for example `https://instance.tld/media/corndog.png?name=corndog.png`. This is needed to provide the correct filename in Content-Disposition headers when using filters like `Pleroma.Upload.Filter.Dedupe`
* `base_url`: The base URL to access a user-uploaded file. Useful when you want to host the media files via another domain or are using a 3rd party S3 provider.
* `link_name`: When enabled Akkoma will add a `name` parameter to the url of the upload, for example `https://instance.tld/media/corndog.png?name=corndog.png`. This is needed to provide the correct filename in Content-Disposition headers
* `base_url`: The base URL to access a user-uploaded file; MUST be configured explicitly.
Using a (sub)domain distinct from the instance endpoint is **strongly** recommended. A good value might be `https://media.myakkoma.instance/media/`.
* `proxy_remote`: If you're using a remote uploader, Akkoma will proxy media requests instead of redirecting to it.
* `proxy_opts`: Proxy options, see `Pleroma.ReverseProxy` documentation.
* `filename_display_max_length`: Set max length of a filename to display. 0 = no limit. Default: 30.
* `default_description`: Sets which default description an image has if none is set explicitly. Options: nil (default) - Don't set a default, :filename - use the filename of the file, a string (e.g. "attachment") - Use this string
!!! warning
`strip_exif` has been replaced by `Pleroma.Upload.Filter.Mogrify`.
@ -646,23 +642,30 @@ config :ex_aws, :s3,
### Upload filters
#### Pleroma.Upload.Filter.AnonymizeFilename
This filter replaces the filename (not the path) of an upload. For complete obfuscation, add
`Pleroma.Upload.Filter.Dedupe` before AnonymizeFilename.
* `text`: Text to replace filenames in links. If empty, `{random}.extension` will be used. You can get the original filename extension by using `{extension}`, for example `custom-file-name.{extension}`.
#### Pleroma.Upload.Filter.Dedupe
**Always** active; cannot be turned off.
Renames files to their hash and prevents duplicate files filling up the disk.
No specific configuration.
#### Pleroma.Upload.Filter.AnonymizeFilename
This filter replaces the declared filename (not the path) of an upload.
* `text`: Text to replace filenames in links. If empty, `{random}.extension` will be used. You can get the original filename extension by using `{extension}`, for example `custom-file-name.{extension}`.
#### Pleroma.Upload.Filter.Exiftool
This filter only strips the GPS and location metadata with Exiftool leaving color profiles and attributes intact.
No specific configuration.
#### Pleroma.Upload.Filter.OnlyMedia
This filter rejects uploads that are not identified with Content-Type matching audio/\*, image/\*, or video/\*
No specific configuration.
#### Pleroma.Upload.Filter.Mogrify
* `args`: List of actions for the `mogrify` command like `"strip"` or `["strip", "auto-orient", {"implode", "1"}]`.
Restrict access for unauthenticated users to timelines (public and federated), user profiles and statuses.
Restrict access for unauthenticated users to timelines (public and federated), user profiles and posts.
* `timelines`: public and federated timelines
* `local`: public timeline
@ -1098,13 +1101,24 @@ Restrict access for unauthenticated users to timelines (public and federated), u
* `profiles`: user profiles
* `local`
* `remote`
* `activities`: statuses
* `activities`: posts
* `local`
* `remote`
Note: when `:instance, :public` is set to `false`, all `:restrict_unauthenticated` items be effectively set to `true` by default. If you'd like to allow unauthenticated access to specific API endpoints on a private instance, please explicitly set `:restrict_unauthenticated` to non-default value in `config/prod.secret.exs`.
#### When :instance, :public is `true`
Note: setting `restrict_unauthenticated/timelines/local` to `true` has no practical sense if `restrict_unauthenticated/timelines/federated` is set to `false` (since local public activities will still be delivered to unauthenticated users as part of federated timeline).
When your instance is in "public" mode, all public resources (users, posts, timelines) are accessible to unauthenticated users.
Turning any of the `:restrict_unauthenticated` options to `true` will restrict access to the corresponding resources.
#### When :instance, :public is `false`
When `:instance, :public` is set to `false`, all of the `:restrict_unauthenticated` options will effectively be set to `true` by default,
meaning that only authenticated users will be able to access the corresponding resources.
If you'd like to allow unauthenticated access to specific resources, you can turn these settings to `false`.
**Note**: setting `restrict_unauthenticated/timelines/local` to `true` has no practical sense if `restrict_unauthenticated/timelines/federated` is set to `false` (since local public activities will still be delivered to unauthenticated users as part of federated timeline).
## Pleroma.Web.ApiSpec.CastAndValidate
@ -1164,7 +1178,7 @@ Each job has these settings:
### Translation Settings
Settings to automatically translate statuses for end users. Currently supported
translation services are DeepL and LibreTranslate.
translation services are DeepL and LibreTranslate. The supported command line tool is [Argos Translate](https://github.com/argosopentech/argos-translate).
Translations are available at `/api/v1/statuses/:id/translations/:language`, where
`language` is the target language code (e.g `en`)
@ -1173,7 +1187,7 @@ Translations are available at `/api/v1/statuses/:id/translations/:language`, whe
- `:enabled` - enables translation
- `:module` - Sets module to be used
- Either `Pleroma.Akkoma.Translators.DeepL` or`Pleroma.Akkoma.Translators.LibreTranslate`
- Either `Pleroma.Akkoma.Translators.DeepL`,`Pleroma.Akkoma.Translators.LibreTranslate`, or `Pleroma.Akkoma.Translators.ArgosTranslate`
### `:deepl`
@ -1185,3 +1199,9 @@ Translations are available at `/api/v1/statuses/:id/translations/:language`, whe
- `:url` - URL of LibreTranslate instance
- `:api_key` - API key for LibreTranslate
### `:argos_translate`
- `:command_argos_translate` - command for `argos-translate`. Can be the command if it's in your PATH, or the full path to the file (default: `argos-translate`).
- `:command_argospm` - command for `argospm`. Can be the command if it's in your PATH, or the full path to the file (default: `argospm`).
- `:strip_html` - Strip html from the post before translating it (default: `true`).
@ -67,3 +67,29 @@ Priority of tags assigns in emoji.txt and custom.txt:
Priority for globs:
`special group setting in config.exs > default setting in config.exs`
## Stealing emoji
Managing your emoji can be hard work, and you just want to have the cool emoji your friends use? As usual, crime comes to the rescue!
You can use the `Pleroma.Web.ActivityPub.MRF.StealEmojiPolicy` [Message Rewrite Facility](../configuration/cheatsheet.md#mrf) to automatically add to your instance emoji that messages from specific servers contain. Note that this happens on message processing, so the emoji will be added only after your instance receives some interaction containing emoji _after_ configuring this.
To activate this you have to [configure](../configuration/cheatsheet.md#mrf_steal_emoji) it in your configuration file. For example if you wanted to steal any emoji that is not related to cinnamon and not larger than about 10K from `coolemoji.space` and `spiceenthusiasts.biz`, you would add the following:
```elixir
config :pleroma, :mrf,
policies: [
Pleroma.Web.ActivityPub.MRF.StealEmojiPolicy
]
config :pleroma, :mrf_steal_emoji,
hosts: [
"coolemoji.space",
"spiceenthusiasts.biz"
],
rejected_shortcodes: [
".*cinnamon.*"
],
size_limit: 10000
```
Note that this may not obey emoji licensing restrictions. It's extremely unlikely that anyone will care, but keep this in mind for when Nintendo starts their own instance.
This would serve the frontend from the the folder at `$instance_static/frontends/pleroma/stable`. You have to copy the frontend into this folder yourself. You can choose the name and ref any way you like, but they will be used by mix tasks to automate installation in the future, the name referring to the project and the ref referring to a commit.
This would serve the frontend from the folder at `$instance_static/frontends/pleroma/stable`. You have to copy the frontend into this folder yourself. You can choose the name and ref any way you like, but they will be used by mix tasks to automate installation in the future, the name referring to the project and the ref referring to a commit.
Refer to [the frontend CLI task](../../administration/CLI_tasks/frontend) for how to install the frontend's files
@ -17,24 +17,33 @@ This sets the Akkoma application server to only listen to the localhost interfac
This sets the `secure` flag on Akkoma’s session cookie. This makes sure, that the cookie is only accepted over encrypted HTTPs connections. This implicitly renames the cookie from `pleroma_key` to `__Host-pleroma-key` which enforces some restrictions. (see [cookie prefixes](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Set-Cookie#Cookie_prefixes))
### `Pleroma.Upload, :uploader, :base_url`
> Recommended value: *anything on a different domain than the instance endpoint; e.g. https://media.myinstance.net/*
Uploads are user controlled and (unless you’re running a true single-user
instance) should therefore not be considered trusted. But the domain is used
as a pivilege boundary e.g. by HTTP content security policy and ActivityPub.
Having uploads on the same domain enabled several past vulnerabilities
able to be exploited by malicious users.
### `:http_security`
> Recommended value: `true`
This will send additional HTTP security headers to the clients, including:
* `X-XSS-Protection: "1; mode=block"`
* `X-XSS-Protection: "0"`
* `X-Permitted-Cross-Domain-Policies: "none"`
* `X-Frame-Options: "DENY"`
* `X-Content-Type-Options: "nosniff"`
* `X-Download-Options: "noopen"`
A content security policy (CSP) will also be set:
```csp
content-security-policy:
default-src 'none';
base-uri 'self';
base-uri 'none';
frame-ancestors 'none';
img-src 'self' data: blob: https:;
media-src 'self' https:;
@ -52,19 +61,15 @@ content-security-policy:
An additional “Strict transport security” header will be sent with the configured `sts_max_age` parameter. This tells the browser, that the domain should only be accessed over a secure HTTPs connection.
#### `ct_max_age`
An additional “Expect-CT” header will be sent with the configured `ct_max_age` parameter. This enforces the use of TLS certificates that are published in the certificate transparency log. (see [Expect-CT](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Expect-CT))
#### `referrer_policy`
> Recommended value: `same-origin`
If you click on a link, your browser’s request to the other site will include from where it is coming from. The “Referrer policy” header tells the browser how and if it should send this information. (see [Referrer policy](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Referrer-Policy))
If you click on a link, your browser’s request to the other site will include from where it is coming from. The “Referrer policy” header tells the browser how and if it should send this information. (see [Referrer policy](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Referrer-Policy)). `no-referrer` can be used if a referrer is not needed for improved privacy.
## systemd
A systemd unit example is provided at `installation/pleroma.service`.
A systemd unit example is provided at `installation/akkoma.service`.
@ -6,7 +6,16 @@ With the `mediaproxy` function you can use nginx to cache this content, so users
## Activate it
* Edit your nginx config and add the following location:
* Edit your nginx config and add the following location to your main server block:
```
location /proxy {
return 404;
}
```
* Set up a subdomain for the proxy with its nginx config on the same machine
*(the latter is not strictly required, but for simplicity we’ll assume so)*
* In this subdomain’s server block add
```
location /proxy {
proxy_cache akkoma_media_cache;
@ -26,9 +35,9 @@ config :pleroma, :media_proxy,
enabled: true,
proxy_opts: [
redirect_on_failure: true
]
#base_url: "https://cache.akkoma.social"
],
base_url: "https://cache.akkoma.social"
```
If you want to use a subdomain to serve the files, uncomment `base_url`, change the url and add a comma after `true` in the previous line.
You **really** should use a subdomain to serve proxied files; while we will fix bugs resulting from this, serving arbitrary remote content on your main domain namespace is a significant attack surface.
@ -6,7 +6,7 @@ To add a custom theme to your instance, you'll first need to get a custom theme,
### Create your own theme
* You can create your own theme using the Pleroma FE by going to settings (gear on the top right) and choose the Theme tab. Here you have the options to create a personal theme.
* You can create your own theme using the Akkoma FE by going to settings (gear on the top right) and choose the Theme tab. Here you have the options to create a personal theme.
* To download your theme, you can do Save preset
* If you want to upload a theme to customise it further, you can upload it using Load preset
@ -60,7 +60,7 @@ Example of `my-awesome-theme.json` where we add the name "My Awesome Theme"
### Set as default theme
Now we can set the new theme as default in the [Pleroma FE configuration](https://docs-fe.akkoma.dev/stable/CONFIGURATION).
Now we can set the new theme as default in the [Pleroma FE configuration](https://docs-fe.akkoma.dev/stable/CONFIGURATION/).
Example of adding the new theme in the back-end config files
If you added it in the back-end configuration file, you'll need to restart your instance for the changes to take effect. If you don't see the changes, it's probably because the browser has cached the previous theme. In that case you'll want to clear browser caches. Alternatively you can use a private/incognito window just to see the changes.
@ -15,18 +15,6 @@ The MRF provides user-configurable policies. The default policy is `NoOpPolicy`,
It is possible to use multiple, active MRF policies at the same time.
## Quarantine Instances
You have the ability to prevent from private / followers-only messages from federating with specific instances. Which means they will only get the public or unlisted messages from your instance.
If, for example, you're using `MIX_ENV=prod` aka using production mode, you would open your configuration file located in `config/prod.secret.exs` and edit or add the option under your `:instance` config object. Then you would specify the instance within quotes.
`SimplePolicy` is capable of handling most common admin tasks.
@ -41,12 +29,13 @@ config :pleroma, :mrf,
Once `SimplePolicy` is enabled, you can configure various groups in the `:mrf_simple` config object. These groups are:
* `reject`: Servers in this group will have their messages rejected.
* `reject`: Servers in this group will have their messages rejected. Also outbound messages will not be sent to these servers.
* `accept`: If not empty, only messages from these instances will be accepted (whitelist federation).
* `media_nsfw`: Servers in this group will have the #nsfw tag and sensitive setting injected into incoming messages which contain media.
* `media_removal`: Servers in this group will have media stripped from incoming messages.
* `avatar_removal`: Avatars from these servers will be stripped from incoming messages.
* `banner_removal`: Banner images from these servers will be stripped from incoming messages.
* `background_removal`: User background images from these servers will be stripped from incoming messages.
* `report_removal`: Servers in this group will have their reports (flags) rejected.
* `federated_timeline_removal`: Servers in this group will have their messages unlisted from the public timelines by flipping the `to` and `cc` fields.
* `reject_deletes`: Deletion requests will be rejected from these servers.
@ -73,6 +62,32 @@ config :pleroma, :mrf_simple,
The effects of MRF policies can be very drastic. It is important to use this functionality carefully. Always try to talk to an admin before writing an MRF policy concerning their instance.
## Hiding or Obfuscating Policies
You can opt out of publicly displaying all MRF policies or only hide or obfuscate selected domains.
transparency_exclusions: [{"ghost.club", "even a fragment is too spoopy for humans"}]
```
## More MRF Policies
See the [documentation cheatsheet](cheatsheet.md)
for all available MRF policies and their options.
## Writing your own MRF Policy
As discussed above, the MRF system is a modular system that supports pluggable policies. This means that an admin may write a custom MRF policy in Elixir or any other language that runs on the Erlang VM, by specifying the module name in the `policies` config setting.
If using an OTP release, set the `RELEASE_VM_ARGS` environment variable to the path to the vm.args file.
Check your OS documentation to adopt a similar strategy on other platforms.
### Virtual Machine and/or few CPU cores
Disable the busy-waiting. This should generally only be done if you're on a platform that does burst scheduling, like AWS.
Disable the busy-waiting. This should generally be done if you're on a platform that does burst scheduling, like AWS, or if you're running other
services on the same machine.
**vm.args:**
@ -39,6 +42,8 @@ Disable the busy-waiting. This should generally only be done if you're on a plat
+sbwtdio none
```
These settings are enabled by default for OTP releases
### Dedicated Hardware
Enable more busy waiting, increase the internal maximum limit of BEAM processes and ports. You can use this if you run on dedicated hardware, but it is not necessary.
@ -6,6 +6,31 @@ Akkoma performance is largely dependent on performance of the underlying databas
[PgTune](https://pgtune.leopard.in.ua) can be used to get recommended settings. Be sure to set "Number of Connections" to 20, otherwise it might produce settings hurtful to database performance. It is also recommended to not use "Network Storage" option.
If your server runs other services, you may want to take that into account. E.g. if you have 4G ram, but 1G of it is already used for other services, it may be better to tell PGTune you only have 3G. In the end, PGTune only provides recomended settings, you can always try to finetune further.
### Example configurations
Here are some configuration suggestions for PostgreSQL 10+.
#### 1GB RAM, 1 CPU
```
shared_buffers = 256MB
effective_cache_size = 768MB
maintenance_work_mem = 64MB
work_mem = 13107kB
```
#### 2GB RAM, 2 CPU
```
shared_buffers = 512MB
effective_cache_size = 1536MB
maintenance_work_mem = 128MB
work_mem = 26214kB
max_worker_processes = 2
max_parallel_workers_per_gather = 1
max_parallel_workers = 2
```
## Disable generic query plans
When PostgreSQL receives a query, it decides on a strategy for searching the requested data, this is called a query plan. The query planner has two modes: generic and custom. Generic makes a plan for all queries of the same shape, ignoring the parameters, which is then cached and reused. Custom, on the contrary, generates a unique query plan based on query parameters.
@ -23,26 +48,3 @@ config :pleroma, Pleroma.Repo,
```
A more detailed explaination of the issue can be found at <https://blog.soykaf.com/post/postgresql-elixir-troubles/>.
## Example configurations
Here are some configuration suggestions for PostgreSQL 10+.
Terms of Service will be shown to all users on the registration page. It's the best place where to write down the rules for your instance. You can modify the rules by adding and changing `$static_dir/static/terms-of-service.html`.
## Favicon
The favicon will display on the frontend, and in the browser tab.
Place a PNG file at `$static_dir/favicon.png` to change the favicon. Not that this
is _one level above_ where the logo is placed, it should be on the same level as
the `frontends` directory.
## Styling rendered pages
To overwrite the CSS stylesheet of the OAuth form and other static pages, you can upload your own CSS file to `instance/static/static.css`. This will completely replace the CSS used by those pages, so it might be a good idea to copy the one from `priv/static/instance/static.css` and make your changes.
## Overriding pleroma-fe styles
To overwrite the CSS stylesheet of pleroma-fe, you can put a file at
`$static_dir/static/custom.css` containing your styles. These will be loaded
with the rest of the CSS.
You will probably have to put `!important` on most/all your styles to override the
default ones, due to the specificity precedence of CSS.
The following are excerpts from the [suggested nginx config](../../../installation/nginx/akkoma.nginx) that demonstrates the necessary config for the media proxy to work.
A `proxy_cache_path` must be defined, for example:
Authentication is required and the user must be an admin.
The `/api/v1/pleroma/admin/*` path is backwards compatible with `/api/pleroma/admin/*` (`/api/pleroma/admin/*` will be deprecated in the future).
Backwards-compatibility for admin API endpoints without version prefixes (`/api/pleroma/admin/*`) has been removed as of Akkoma 3.6.0. Please use `/api/v1/pleroma/admin/*` instead.
## `GET /api/v1/pleroma/admin/users`
@ -1056,14 +1056,13 @@ Most of the settings will be applied in `runtime`, this means that you don't nee
# Differences in Mastodon API responses from vanilla Mastodon
A Akkoma instance can be identified by "<Mastodonversion> (compatible; Pleroma <version>)" present in `version` field in response from `/api/v1/instance`
A Akkoma instance can be identified by "<Mastodonversion> (compatible; Akkoma <version>)" present in `version` field in response from `/api/v1/instance`
## Flake IDs
@ -8,23 +8,32 @@ Akkoma uses 128-bit ids as opposed to Mastodon's 64 bits. However, just like Mas
## Timelines
In addition to Mastodon’s timelines, there is also a “bubble timeline” showing
posts from the local instance and a set of closely related instances as chosen
by the administrator. It is available under `/api/v1/timelines/bubble`.
Adding the parameter `with_muted=true` to the timeline queries will also return activities by muted (not by blocked!) users.
Adding the parameter `exclude_visibilities` to the timeline queries will exclude the statuses with the given visibilities. The parameter accepts an array of visibility types (`public`, `unlisted`, `private`, `direct`), e.g., `exclude_visibilities[]=direct&exclude_visibilities[]=private`.
Adding the parameter `reply_visibility` to the public and home timelines queries will filter replies. Possible values: without parameter (default) shows all replies, `following` - replies directed to you or users you follow, `self` - replies directed to you.
Adding the parameter `reply_visibility` to the public, bubble or home timelines queries will filter replies. Possible values: without parameter (default) shows all replies, `following` - replies directed to you or users you follow, `self` - replies directed to you.
Adding the parameter `instance=lain.com` to the public timeline will show only statuses originating from `lain.com` (or any remote instance).
Home, public, hashtag & list timelines accept these parameters:
All but the direct timeline accept these parameters:
- `only_media`: show only statuses with media attached
- `local`: show only local statuses
- `remote`: show only remote statuses
Home, public, hashtag & list timelines further accept:
- `local`: show only local statuses
## Statuses
- `visibility`: has additional possible values `list` and `local` (for local-only statuses)
- `emoji_reactions`: additional field since Akkoma 3.2.0; identical to `pleroma/emoji_reactions`
Has these additional fields under the `pleroma` object:
@ -36,7 +45,9 @@ Has these additional fields under the `pleroma` object:
- `spoiler_text`: a map consisting of alternate representations of the `spoiler_text` property with the key being its mimetype. Currently, the only alternate representation supported is `text/plain`
- `expires_at`: a datetime (iso8601) that states when the post will expire (be deleted automatically), or empty if the post won't expire
- `thread_muted`: true if the thread the post belongs to is muted
- `emoji_reactions`: A list with emoji / reaction maps. The format is `{name: "☕", count: 1, me: true}`. Contains no information about the reacting users, for that use the `/statuses/:id/reactions` endpoint.
- `emoji_reactions`: A list with emoji / reaction maps. The format is `{name: "☕", count: 2, me: true, account_ids: ["UserID1", "UserID2"]}`.
The `account_ids` property was added in Akkoma 3.2.0.
Further info about all reacting users at once, can be found using the `/statuses/:id/reactions` endpoint.
- `parent_visible`: If the parent of this post is visible to the user or not.
- `pinned_at`: a datetime (iso8601) when status was pinned, `null` otherwise.
@ -110,6 +121,12 @@ Has these additional fields under the `pleroma` object:
- `notification_settings`: object, can be absent. See `/api/v1/pleroma/notification_settings` for the parameters/keys returned.
- `favicon`: nullable URL string, Favicon image of the user's instance
Has these additional fields under the `akkoma` object:
- `instance`: nullable object with metadata about the user’s instance
- `status_ttl_days`: nullable int, default time after which statuses are deleted
- `permit_followback`: boolean, whether follows from followed accounts are auto-approved
### Source
Has these additional fields under the `pleroma` object:
@ -195,7 +212,7 @@ Additional parameters can be added to the JSON body/Form data:
- `preview`: boolean, if set to `true` the post won't be actually posted, but the status entity would still be rendered back. This could be useful for previewing rich text/custom emoji, for example.
- `content_type`: string, contain the MIME type of the status, it is transformed into HTML by the backend. You can get the list of the supported MIME types with the nodeinfo endpoint.
- `to`: A list of nicknames (like `lain@soykaf.club` or `lain` on the local server) that will be used to determine who is going to be addressed by this post. Using this will disable the implicit addressing by mentioned names in the `status` body, only the people in the `to` list will be addressed. The normal rules for post visibility are not affected by this and will still apply.
- `to`: A list of nicknames (like `admin@otp.akkoma.dev` or `admin` on the local server) that will be used to determine who is going to be addressed by this post. Using this will disable the implicit addressing by mentioned names in the `status` body, only the people in the `to` list will be addressed. The normal rules for post visibility are not affected by this and will still apply.
- `visibility`: string, besides standard MastoAPI values (`direct`, `private`, `unlisted`, `local` or `public`) it can be used to address a List by setting it to `list:LIST_ID`.
- `expires_in`: The number of seconds the posted activity should expire in. When a posted activity expires it will be deleted from the server, and a delete request for it will be federated. This needs to be longer than an hour.
- `in_reply_to_conversation_id`: Will reply to a given conversation, addressing only the people who are part of the recipient set of that conversation. Sets the visibility to `direct`.
@ -214,6 +231,11 @@ Returns: array of Status.
The maximum number of statuses is limited to 100 per request.
## PUT `/api/v1/statuses/:id/emoji_reactions/:emoji`
This endpoint is an extension of the Fedibird Mastodon fork.
It behaves identical to PUT `/api/v1/pleroma/statuses/:id/reactions/:emoji`.
## PATCH `/api/v1/accounts/update_credentials`
Additional parameters can be added to the JSON body/Form data:
* `enabled` (Akkoma extension) enables the endpoint
* `ip_whitelist` (Akkoma extension) could be used to restrict access only to specified IPs
* `auth` sets the authentication (`false` for no auth; configurable to HTTP Basic Auth, see [prometheus-plugs](https://github.com/deadtrickster/prometheus-plugs#exporting) documentation)
* `format` sets the output format (`:text` or `:protobuf`)
* `path` sets the path to app metrics page
## `/api/pleroma/app_metrics`
## `/api/v1/akkoma/metrics`
### Exports Prometheus application metrics
* Method: `GET`
* Authentication: not required by default (see configuration options above)
* Authentication: required
* Params: none
* Response: text
@ -37,8 +26,8 @@ The following is a config example to use with [Grafana](https://grafana.com)
This section contains notes and guidelines for developers.
# Contributing to Akkoma
You wish to add a new feature in Akkoma, but don't know how to proceed? This guide takes you through the various steps of the development and contribution process.
If you're looking for stuff to implement or fix, check the [bug-tracker](https://akkoma.dev/AkkomaGang/akkoma/issues) or [forum](https://meta.akkoma.dev/c/requests/5).
Come say hi to us in the [#akkoma-dev chat room](./../#irc)!
## Akkoma Clients
Akkoma is the back-end. Clients have their own repositories and often separate projects. You can check what clients work with Akkoma [on the clients page](../clients/). If you maintain a working client not listed yet, feel free to make a PR [to these docs](./#docs)!
For resources on APIs and such, check the sidebar of this page.
## Docs
The docs are written in Markdown, including certain extensions, and can be found [in the docs folder of the Akkoma repo](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/docs/). The content itself is stored in the `docs` subdirectory.
## Technology
Akkoma is written in [Elixir](https://elixir-lang.org/) and uses [Postgresql](https://www.postgresql.org/) for database. We use [Git](https://git-scm.com/) for collaboration and tracking code changes. Furthermore it can typically run on [Unix and Unix-like OS'es](https://en.wikipedia.org/wiki/Unix-like). For development, you should use an OS which [can run Akkoma](../installation/debian_based_en/).
It's good to have at least some basic understanding of at least Git and Elixir. If this is completely new for you, there's some [videos explaining Git](https://git-scm.com/doc) and Codeberg has a nice article explaining the typical [pull requests Git flow](https://docs.codeberg.org/collaborating/pull-requests-and-git-flow/). For Elixir, you can follow Elixir's own [Getting Started guide](https://elixir-lang.org/getting-started/introduction.html).
## Setting up a development environment
The best way to start is getting the software to run from source so you can start poking on it. Check out the [guides for setting up an Akkoma instance for development](setting_up_akkoma_dev/#setting-up-a-akkoma-development-environment).
## General overview
### Modules
Akkoma has several modules. There are modules for [uploading](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/lib/pleroma/uploaders), [upload filters](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/lib/pleroma/upload/filter), [translators](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/lib/pleroma/akkoma/translators)... The most famous ones are without a doubt the [MRF policies](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/lib/pleroma/web/activity_pub/mrf). Modules are often self contained and a good way to start with development because you don't have to think about much more than just the module itself. We even have an example on [writing your own MRF policy](/configuration/mrf/#writing-your-own-mrf-policy)!
Another easy entry point is the [mix tasks](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/lib/mix/tasks/pleroma). They too are often self contained and don't need you to go through much of the code.
### Activity Streams/Activity Pub
Akkoma uses Activity Streams for both federation, as well as internal representation. It may be interesting to at least go over the specifications of [Activity Pub](https://www.w3.org/TR/activitypub/), [Activity Streams 2.0](https://www.w3.org/TR/activitystreams-core/), and [Activity Streams Vocabulary](https://www.w3.org/TR/activitystreams-vocabulary/). Note that these are not enough to have a full grasp of how everything works, but should at least give you the basics to understand how messages are passed between and inside Akkoma instances.
## Don't forget
When you make changes, you're expected to create [a Pull Request](https://akkoma.dev/AkkomaGang/akkoma/pulls). You don't have to wait until you finish to create the PR, but please do prefix the title of the PR with "WIP: " for as long as you're still working on it. The sooner you create your PR, the sooner people know what you are working on and the sooner you can get feedback and, if needed, help. You can then simply keep working on it until you are finished.
When doing changes, don't forget to add it to the relevant parts of the [CHANGELOG.md](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/CHANGELOG.md).
You're expected to write [tests](https://elixirschool.com/en/lessons/testing/basics). While code is generally stored in the `lib` directory, tests are stored in the `test` directory using a similar folder structure. Feel free to peak at other tests to see how they are done. Obviously tests are expected to pass and properly test the functionality you added. If you feel really confident, you could even try to [write a test first and then write the code needed to make it pass](https://en.wikipedia.org/wiki/Test-driven_development)!
Code is formatted using the default formatter that comes with Elixir. You can format a file with e.g. `mix format /path/to/file.ex`. To check if everything is properly formatted, you can run `mix format --check-formatted`.
@ -5,22 +5,37 @@ Akkoma requires some adjustments from the defaults for running the instance loca
## Installing
1. Install Akkoma as explained in [the docs](../installation/debian_based_en.md), with some exceptions:
* You can use your own fork of the repository and add akkoma as a remote `git remote add akkoma 'https://akkoma.dev/AkkomaGang/akkoma.git'`
* You can skip systemd and nginx and all that stuff
* No need to create a dedicated akkoma user, it's easier to just use your own user
* For the DB you can still choose a dedicated user, the mix tasks set it up for you so it's no extra work for you
* You can use your own fork of the repository and add akkoma as a remote `git remote add akkoma 'https://akkoma.dev/AkkomaGang/akkoma.git'`
* For domain you can use `localhost`
* For the DB you can still choose a dedicated user. The mix tasks sets it up, so it's no extra work for you
* instead of creating a `prod.secret.exs`, create `dev.secret.exs`
* No need to prefix with `MIX_ENV=prod`. We're using dev and that's the default MIX_ENV
* You can skip nginx and systemd
* For front-end, you'll probably want to install and use the develop branch instead of the stable branch. There's no guarantee that the stable branch of the FE will always work on the develop branch of the BE.
2. Change the dev.secret.exs
* Change the FE settings to use the installed branch (see also [Frontend Management](/configuration/frontend_management/))
* Change the scheme in `config :pleroma, Pleroma.Web.Endpoint` to http (see examples below)
* If you want to change other settings, you can do that too
3. You can now start the server `mix phx.server`. Once it's build and started, you can access the instance on `http://<host>:<port>` (e.g.http://localhost:4000 ) and should be able to do everything locally you normaly can.
3. You can now start the server with `mix phx.server`. Once it's build and started, you can access the instance on `http://<host>:<port>` (e.g.http://localhost:4000 ) and should be able to do everything locally you normally can.
Example on how to install pleroma-fe and admin-fe using it's develop branch
Example config to disable captcha. This makes it a bit easier to create test-users.
@ -94,4 +109,4 @@ Update Akkoma as explained in [the docs](../administration/updating.md). Just ma
## Working on multiple branches
If you develop on a separate branch, it's possible you did migrations that aren't merged into another branch you're working on. If you have multiple things you're working on, it's probably best to set up multiple Akkoma instances each with their own database. If you finished with a branch and want to switch back to develop to start a new branch from there, you can drop the database and recreate the database (e.g. by using `config/setup_db.psql`). The commands to drop and recreate the database can be found in [the docs](../administration/backup.md).
If you develop on a separate branch, it's possible you did migrations that aren't merged into another branch you're working on. In that case, it's probably best to set up multiple Akkoma instances each with their own database. If you finished with a branch and want to switch back to develop to start a new branch from there, you can drop the database and recreate the database (e.g. by using `config/setup_db.psql`). The commands to drop and recreate the database can be found in [the docs](../administration/backup.md).
Akkoma is a federated social networking platform, compatible with Mastodon and other ActivityPub implementations. It is free software licensed under the AGPLv3.
It actually consists of two components: a backend, named simply Akkoma, and a user-facing frontend, named Pleroma-FE. It also includes the Mastodon frontend, if that's your thing.
It actually consists of two components: a backend, named simply Akkoma, and a user-facing frontend, named Akkoma-FE. It also includes the Mastodon frontend, if that's your thing.
It's part of what we call the fediverse, a federated network of instances which speak common protocols and can communicate with each other.
One account on an instance is enough to talk to the entire fediverse!
@ -23,20 +23,20 @@ will be posted via [@akkoma@ihba](https://ihatebeinga.live/users/akkoma)
## How can I use it?
Akkoma instances are already widely deployed, a list can be found at <https://the-federation.info/pleroma> and <https://fediverse.network/pleroma>.
Akkoma instances are already widely deployed, a list can be found at <https://the-federation.info/akkoma> and <https://akkoma.fediverse.observer/list>.
If you don't feel like joining an existing instance, but instead prefer to deploy your own instance, that's easy too!
Installation instructions can be found in the installation section of these docs.
## I got an account, now what?
Great! Now you can explore the fediverse! Open the login page for your Akkoma instance (e.g. <https://pleroma.soykaf.com>) and login with your username and password. (If you don't have an account yet, click on Register)
Great! Now you can explore the fediverse! Open the login page for your Akkoma instance (e.g. <https://otp.akkoma.dev>) and login with your username and password. (If you don't have an account yet, click on Register)
### Pleroma-FE
The default front-end used by Akkoma is Pleroma-FE. You can find more information on what it is and how to use it in the [Introduction to Pleroma-FE](https://docs-fe.akkoma.dev/stable/).
### Akkoma-FE
The default front-end used by Akkoma is Akkoma-FE. You can find more information on what it is and how to use it in the [Introduction to Akkoma-FE](https://docs-fe.akkoma.dev/stable/).
### Mastodon interface
If the Pleroma-FE interface isn't your thing, or you're just trying something new but you want to keep using the familiar Mastodon interface, we got that too!
Just add a "/web" after your instance url (e.g. <https://pleroma.soykaf.com/web>) and you'll end on the Mastodon web interface, but with a Akkoma backend! MAGIC!
If the Akkoma-FE interface isn't your thing, or you're just trying something new but you want to keep using the familiar Mastodon interface, we got that too!
Just add a "/web" after your instance url (e.g. <https://otp.akkoma.dev/web>) and you'll end on the Mastodon web interface, but with a Akkoma backend! MAGIC!
The Mastodon interface is from the Glitch-soc fork. For more information on the Mastodon interface you can check the [Mastodon](https://docs.joinmastodon.org/) and [Glitch-soc](https://glitch-soc.github.io/docs/) documentation.
Remember, what you see is only the frontend part of Mastodon, the backend is still Akkoma.
**Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you don’t have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
doas mkdir -p /opt/akkoma
doas chown -R akkoma:akkoma /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -109,7 +109,7 @@ doas -u akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
doas -u akkoma mv config/{generated_config.exs,prod.secret.exs}
@ -145,47 +145,13 @@ If you want to open your newly installed instance to the world, you should run n
doas apk add nginx
```
* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
```shell
doas apk add certbot
```
and then set it up:
```shell
doas mkdir -p /var/lib/letsencrypt/
doas certbot certonly --email <your@emailaddress> -d <yourdomain> --standalone
```
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
* Copy the example nginx configuration to the nginx folder
```shell
doas cp /opt/akkoma/installation/nginx/akkoma.nginx /etc/nginx/conf.d/akkoma.conf
```
* Before starting nginx edit the configuration and change it to your needs. You must change change `server_name` and the paths to the certificates. You can use `nano` (install with `apk add nano` if missing).
* Before starting nginx edit the configuration and change it to your needs. You must change change `server_name`. You can use `nano` (install with `apk add nano` if missing).
* Enable and start nginx:
```shell
@ -193,10 +159,37 @@ doas rc-update add nginx
doas rc-service nginx start
```
If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
```shell
doas certbot certonly --email <your@emailaddress> -d <yourdomain> --webroot -w /var/lib/letsencrypt/
doas apk add certbot certbot-nginx
```
and then set it up:
```shell
doas mkdir -p /var/lib/letsencrypt/
doas certbot --email <your@emailaddress> -d <yourdomain> -d <media_domain> --nginx
```
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. A common source of problems are nginx config syntax errors; this can be checked for by running `nginx -t`.
To automatically renew, set up a cron job like so:
```shell
# Enable the crond service
doas rc-update add crond
doas rc-service crond start
# Test that renewals work
doas certbot renew --cert-name yourinstance.tld --nginx --dry-run
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. A common source of problems are nginx config syntax errors; this can be checked for by running `nginx -t`.
---
* Copy the example nginx configuration and activate it:
To make sure renewals work, enable the appropriate systemd timer:
This guide will assume you are on Debian 11 (“bullseye”) or later. This guide should also work with Ubuntu 18.04 (“Bionic Beaver”) and later. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-add-delete-and-grant-sudo-privileges-to-users-on-a-debian-vps). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su <username> -s $SHELL -c 'command'` instead.
This guide will assume you are on Debian 12 (“bookworm”) or later. This guide should also work with Ubuntu 22.04 (“Jammy Jellyfish”) and later. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-add-delete-and-grant-sudo-privileges-to-users-on-a-debian-vps). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su <username> -s $SHELL -c 'command'` instead.
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
### Install Elixir and Erlang
If your distribution packages a recent enough version of Elixir, you can install it directly from the distro repositories and skip to the next section of the guide:
```shell
sudo apt install elixir erlang-dev erlang-nox
```
Otherwise use [asdf](https://github.com/asdf-vm/asdf) to install the latest versions of Elixir and Erlang.
First, install some dependencies needed to build Elixir and Erlang:
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
---
* Copy the example nginx configuration and activate it:
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. A common source of problems are nginx config syntax errors; this can be checked for by running `nginx -t`.
Certificate renewal should be handled automatically by Certbot from now on.
#### Other webserver/proxies
You can find example configurations for them in `/opt/akkoma/installation/`.
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
---
* Copy the example nginx configuration and activate it:
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. A common source of problems are nginx config syntax errors; this can be checked for by running `nginx -t`.
Certificate renewal should be handled automatically by Certbot from now on.
#### Other webserver/proxies
You can find example configurations for them in `/opt/akkoma/installation/`.
You could opt to add `USE="uuid"` to `/etc/portage/make.conf` if you'd rather set this as a global USE flags, but this flags does unrelated things in other packages, so keep that in mind if you elect to do so.
If you are planning to use `nginx`, as this guide suggests, you should also add the following flag to the same file.
```text
www-servers/nginx NGINX_MODULES_HTTP: slice
```
Double check your compiler flags in `/etc/portage/make.conf`. If you require any special compilation flags or would like to set up remote builds, now is the time to do so. Be sure that your CFLAGS and MAKEOPTS make sense for the platform you are using. It is not recommended to use above `-O2` or risky optimization flags for a production server.
### Installing a cron daemon
@ -195,25 +201,6 @@ Assuming you want to open your newly installed federated social network to, well
include sites-enabled/*;
```
* Setup your SSL cert, using your method of choice or certbot. If using certbot, install it if you haven't already:
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again). Often the answer to issues with certbot is to use the `--nginx` flag once you have nginx up and running.
If you are using any additional subdomains, such as for a media proxy, you can re-run the same command with the subdomain in question. When it comes time to renew later, you will not need to run multiple times for each domain, one renew will handle it.
---
* Copy the example nginx configuration and activate it:
```shell
@ -231,9 +218,24 @@ Pay special attention to the line that begins with `ssl_ecdh_curve`. It is stong
```shell
# rc-update add nginx default
# /etc/init.d/nginx start
# rc-service nginx start
```
* Setup your SSL cert, using your method of choice or certbot. If using certbot, install it if you haven't already:
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. A common source of problems are nginx config syntax errors; this can be checked for by running `nginx -t`.
If you are using certbot, it is HIGHLY recommend you set up a cron job that renews your certificate, and that you install the suggested `certbot-nginx` plugin. If you don't do these things, you only have yourself to blame when your instance breaks suddenly because you forgot about it.
First, ensure that the command you will be installing into your crontab works.
@ -262,7 +264,7 @@ Even if you are using S3, Akkoma needs someplace to store media posted on your i
```shell
akkoma$ mkdir -p ~/akkoma/uploads
```
```
#### init.d service
@ -272,7 +274,9 @@ Even if you are using S3, Akkoma needs someplace to store media posted on your i
and either merge or cherry-pick from there depending on how you've got
things.
## Common issues
### The frontend doesn't show after installing it
This may occur if you are using database configuration.
Sometimes the config in your database will cause akkoma to still report
that there's no frontend, even when you've run the install.
To fix this, run:
=== "OTP"
```sh
./bin/pleroma_ctl config delete pleroma frontends
```
=== "From Source"
```sh
mix pleroma.config delete pleroma frontends
```
which will remove the config from the database. Things should work now.
## Migrating back to Pleroma
Akkoma is a hard fork of Pleroma. As such, migrating back is not guaranteed to always work. But if you want to migrate back to Pleroma, you can always try. Just note that you may run into unexpected issues and you're basically on your own. The following are some tips that may help, but note that these are barely tested, so proceed at your own risk.
First you will need to roll back the database migrations. The latest migration both Akkoma and Pleroma still have in common should be 20210416051708, so roll back to that. If you run from source, that should be
Then switch back to Pleroma for updates (similar to how was done to migrate to Akkoma), and remove the front-ends. The front-ends are installed in the `frontends` folder in the [static directory](../configuration/static_dir.md). Once you are back to Pleroma, you will need to run the database migrations again. See the Pleroma documentation for this.
After this use your previous backups to restore data from diverging features.
This guide describes the installation and configuration of akkoma (and the required software to run it) on a single OpenBSD 6.6 server.
This guide describes the installation and configuration of akkoma (and the required software to run it) on a single OpenBSD 7.2 server.
For any additional information regarding commands and configuration files mentioned here, check the man pages [online](https://man.openbsd.org/) or directly on your server with the man command.
@ -12,7 +12,8 @@ For any additional information regarding commands and configuration files mentio
To install them, run the following command (with doas or as root):
pkg_add erlang-wx # Choose the latest version as package version when promted
```
Akkoma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt.
@ -27,32 +28,35 @@ Per [`docs/installation/optional/media_graphics_packages.md`](../installation/op
To install the above:
```
pkg_add ImageMagick ffmpeg p5-Image-ExifTool
pkg_add ffmpeg p5-Image-ExifTool
```
#### Creating the akkoma user
Akkoma will be run by a dedicated user, \_akkoma. Before creating it, insert the following lines in login.conf:
Akkoma will be run by a dedicated user, `_akkoma`. Before creating it, insert the following lines in `/etc/login.conf`:
```
akkoma:\
:datasize-max=1536M:\
:datasize-cur=1536M:\
:openfiles-max=4096
```
This creates a "akkoma" login class and sets higher values than default for datasize and openfiles (see [login.conf(5)](https://man.openbsd.org/login.conf)), this is required to avoid having akkoma crash some time after starting.
This creates a `akkoma` login class and sets higher values than default for datasize and openfiles (see [login.conf(5)](https://man.openbsd.org/login.conf)), this is required to avoid having akkoma crash some time after starting.
Create the \_akkoma user, assign it the akkoma login class and create its home directory (/home/\_akkoma/): `useradd -m -L akkoma _akkoma`
Create the `_akkoma` user, assign it the akkoma login class and create its home directory (`/home/_akkoma/`): `useradd -m -L akkoma _akkoma`
#### Clone akkoma's directory
Enter a shell as the \_akkoma user. As root, run `su _akkoma -;cd`. Then clone the repository with `git clone https://akkoma.dev/AkkomaGang/akkoma.git`. Akkoma is now installed in /home/\_akkoma/akkoma/, it will be configured and started at the end of this guide.
Enter a shell as the `_akkoma` user. As root, run `su _akkoma -;cd`. Then clone the repository with `git clone https://akkoma.dev/AkkomaGang/akkoma.git`. Akkoma is now installed in `/home/_akkoma/akkoma/`, it will be configured and started at the end of this guide.
#### PostgreSQL
Start a shell as the \_postgresql user (as root run `su _postgresql -` then run the `initdb` command to initialize postgresql:
You will need to specify pgdata directory to the default (/var/postgresql/data) with the `-D <path>` and set the user to postgres with the `-U <username>` flag. This can be done as follows:
Create `_postgresql`'s user directory (it hasn't been created yet): `mdir var/postgresql/data`. To set it as home
directory for user `_postgresql` run `usermod -d /var/postgresql/data _postgresql`.
Start a shell as the `_postgresql` user (as root run `su _postgresql -` then run the `initdb` command to initialize postgresql.
You will need to specify pgdata directory to the default (`/var/postgresql/data`) with the `-D <path>` and set the user to postgres with the `-U <username>` flag. This can be done as follows:
```
initdb -D /var/postgresql/data -U postgres
```
If you are not using the default directory, you will have to update the `datadir` variable in the /etc/rc.d/postgresql script.
If you are not using the default directory, you will have to update the `datadir` variable in the `/etc/rc.d/postgresql` script.
When this is done, enable postgresql so that it starts on boot and start it. As root, run:
```
@ -68,7 +72,7 @@ httpd will have three fuctions:
* serve a robots.txt file
* get Let's Encrypt certificates, with acme-client
Do not forget to change *<IPv4/6 address\>* to your server's address(es). If httpd should only listen on one protocol family, comment one of the two first *listen* options.
Create the /var/www/htdocs/local/ folder and write the content of your robots.txt in /var/www/htdocs/local/robots.txt.
Create the `/var/www/htdocs/local/` folder and write the content of your robots.txt in `/var/www/htdocs/local/robots.txt`.
Check the configuration with `httpd -n`, if it is OK enable and start httpd (as root):
```
rcctl enable httpd
@ -106,7 +107,7 @@ rcctl start httpd
#### acme-client
acme-client is used to get SSL/TLS certificates from Let's Encrypt.
Insert the following configuration in /etc/acme-client.conf:
Insert the following configuration in `/etc/acme-client.conf`:
Replace *<domain name\>* by the domain name you'll use for your instance. As root, run `acme-client -n` to check the config, then `acme-client -ADv <domain name>` to create account and domain keys, and request a certificate for the first time.
Make acme-client run everyday by adding it in /etc/daily.local. As root, run the following command: `echo "acme-client <domain name>" >> /etc/daily.local`.
Make acme-client run everyday by adding it in `/etc/daily.local`. As root, run the following command: `echo "acme-client <domain name>" >> /etc/daily.local`.
Relayd will look for certificates and keys based on the address it listens on (see next part), the easiest way to make them available to relayd is to create a link, as root run:
```
@ -138,7 +139,7 @@ This will have to be done for each IPv4 and IPv6 address relayd listens on.
#### relayd
relayd will be used as the reverse proxy sitting in front of akkoma.
Insert the following configuration in /etc/relayd.conf:
Insert the following configuration in `/etc/relayd.conf`:
@ -160,15 +161,14 @@ http protocol plerup { # Protocol for upstream akkoma server
match request header append "X-Forwarded-For" value "$REMOTE_ADDR" # This two header and the next one are not strictly required by akkoma but adding them won't hurt
match request header append "X-Forwarded-By" value "$SERVER_ADDR:$SERVER_PORT"
match response header append "X-XSS-Protection" value "1; mode=block"
match response header append "X-XSS-Protection" value "0"
match response header append "X-Permitted-Cross-Domain-Policies" value "none"
match response header append "X-Frame-Options" value "DENY"
match response header append "X-Content-Type-Options" value "nosniff"
match response header append "Referrer-Policy" value "same-origin"
match response header append "X-Download-Options" value "noopen"
match response header append "Content-Security-Policy" value "default-src 'none'; base-uri 'self'; form-action 'self'; img-src 'self' data: https:; media-src 'self' https:; style-src 'self' 'unsafe-inline'; font-src 'self'; script-src 'self'; connect-src 'self' wss://CHANGEME.tld; upgrade-insecure-requests;" # Modify "CHANGEME.tld" and set your instance's domain here
match response header append "Content-Security-Policy" value "default-src 'none'; base-uri 'none'; form-action 'self'; img-src 'self' data: https:; media-src 'self' https:; style-src 'self' 'unsafe-inline'; font-src 'self'; script-src 'self'; connect-src 'self' wss://CHANGEME.tld; upgrade-insecure-requests;" # Modify "CHANGEME.tld" and set your instance's domain here
match request header append "Connection" value "upgrade"
#match response header append "Strict-Transport-Security" value "max-age=31536000; includeSubDomains" # Uncomment this only after you get HTTPS working.
#match response header append "Strict-Transport-Security" value "max-age=63072000; includeSubDomains; preload" # Uncomment this only after you get HTTPS working.
# If you do not want remote frontends to be able to access your Akkoma backend server, comment these lines
match response header append "Access-Control-Allow-Origin" value "*"
@ -197,7 +197,7 @@ rcctl start relayd
#### pf
Enabling and configuring pf is highly recommended.
In /etc/pf.conf, insert the following configuration:
In `/etc/pf.conf`, insert the following configuration:
```
# Macros
if="<networkinterface>"
@ -221,31 +221,30 @@ pass in quick on $if inet6 proto icmp6 to ($if) icmp6-type { echoreq unreach par
pass in quick on $if proto tcp to ($if) port { http https } # relayd/httpd
pass in quick on $if proto tcp from $authorized_ssh_clients to ($if) port ssh
```
Replace *<network interface\>* by your server's network interface name (which you can get with ifconfig). Consider replacing the content of the authorized\_ssh\_clients macro by, for exemple, your home IP address, to avoid SSH connection attempts from bots.
Replace *<network interface\>* by your server's network interface name (which you can get with ifconfig). Consider replacing the content of the `authorized_ssh_clients` macro by, for example, your home IP address, to avoid SSH connection attempts from bots.
Check pf's configuration by running `pfctl -nf /etc/pf.conf`, load it with `pfctl -f /etc/pf.conf` and enable pf at boot with `rcctl enable pf`.
#### Configure and start akkoma
Enter a shell as \_akkoma (as root `su _akkoma -`) and enter akkoma's installation directory (`cd ~/akkoma/`).
Enter a shell as `_akkoma` (as root `su _akkoma -`) and enter akkoma's installation directory (`cd ~/akkoma/`).
Then follow the main installation guide:
* run `mix deps.get`
* run `MIX_ENV=prod mix pleroma.instance gen` and enter your instance's information when asked
* copy config/generated\_config.exs to config/prod.secret.exs. The default values should be sufficient but you should edit it and check that everything seems OK.
* copy `config/generated_config.exs` to `config/prod.secret.exs`. The default values should be sufficient but you should edit it and check that everything seems OK.
* exit your current shell back to a root one and run `psql -U postgres -f /home/_akkoma/akkoma/config/setup_db.psql` to setup the database.
* return to a \_akkoma shell into akkoma's installation directory (`su _akkoma -;cd ~/akkoma`) and run `MIX_ENV=prod mix ecto.migrate`
* return to a `_akkoma` shell into akkoma's installation directory (`su _akkoma -;cd ~/akkoma`) and run `MIX_ENV=prod mix ecto.migrate`
As \_akkoma in /home/\_akkoma/akkoma, you can now run `LC_ALL=en_US.UTF-8 MIX_ENV=prod mix phx.server` to start your instance.
As `_akkoma` in `/home/_akkoma/akkoma`, you can now run `LC_ALL=en_US.UTF-8 MIX_ENV=prod mix phx.server` to start your instance.
In another SSH session/tmux window, check that it is working properly by running `ftp -MVo - http://127.0.0.1:4000/api/v1/instance`, you should get json output. Double-check that *uri*'s value is your instance's domain name.
##### Starting akkoma at boot
An rc script to automatically start akkoma at boot hasn't been written yet, it can be run in a tmux session (tmux is in base).
#### Create administrative user
If your instance is up and running, you can create your first user with administrative rights with the following command as the \_akkoma user.
If your instance is up and running, you can create your first user with administrative rights with the following command as the `_akkoma` user.
```
LC_ALL=en_US.UTF-8 MIX_ENV=prod mix pleroma.user new <username><your@emailaddress> --admin
This guide covers a installation using an OTP release. To install Akkoma from source, please check out the corresponding guide for your distro.
## Pre-requisites
* A machine running Linux with GNU (e.g. Debian, Ubuntu) or musl (e.g. Alpine) libc and `x86_64`, `aarch64` or `armv7l` CPU, you have root access to. If you are not sure if it's compatible see [Detecting flavour section](#detecting-flavour) below
* A machine running Linux with GNU (e.g. Debian, Ubuntu) or musl (e.g. Alpine) libc and an `x86_64` or `arm64` CPU you have root access to. If you are not sure if it's compatible see [Detecting flavour section](#detecting-flavour) below
* For installing OTP releases on RedHat-based distros like Fedora and Centos Stream, please follow [this guide](./otp_redhat_en.md) instead.
* A (sub)domain pointed to the machine
You will be running commands as root. If you aren't root already, please elevate your priviledges by executing `sudo su`/`su`.
You will be running commands as root. If you aren't root already, please elevate your priviledges by executing `sudo -i`/`su`.
While in theory OTP releases are possbile to install on any compatible machine, for the sake of simplicity this guide focuses only on Debian/Ubuntu and Alpine.
### Detecting flavour
This is a little more complex than it used to be (thanks ubuntu)
Use the following mapping to figure out your flavour:
If your distro does not have either of those you can append `include /etc/nginx/akkoma.conf` to the end of the http section in /etc/nginx/nginx.conf and
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. A common source of problems are nginx config syntax errors; this can be checked for by running `nginx -t`.
#### Start nginx
=== "Alpine"
@ -248,32 +255,19 @@ If everything worked, you should see Akkoma-FE when visiting your domain. If tha
## Post installation
### Setting up auto-renew of the Let's Encrypt certificate
```sh
# Create the directory for webroot challenges
mkdir -p /var/lib/letsencrypt
# Uncomment the webroot method
$EDITOR path-to-nginx-config
# Verify that the config is valid
nginx -t
```
=== "Alpine"
```
# Restart nginx
rc-service nginx restart
# Start the cron daemon and make it start on boot
rc-service crond start
rc-update add crond
# Ensure the webroot menthod and post hook is working
If that doesn't work the first time, add `--dry-run` to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. A common source of problems are nginx config syntax errors; this can be checked for by running `nginx -t`.
If you're successful with obtaining the certificates, opening your (sub)domain in a browser will result in a 502 error, since Akkoma hasn't been started yet.
### Setting up a system service
@ -239,19 +241,11 @@ sudo nginx -t
# Restart nginx
sudo systemctl restart nginx
# Ensure the webroot menthod and post hook is working
Assuming the commands were run successfully, certbot should be able to renew your certificates automatically via the `certbot-renew.timer` systemd unit.
[YunoHost](https://yunohost.org) is a server operating system aimed at self-hosting. The YunoHost community maintains a package of Akkoma which allows you to install Akkoma on YunoHost. You can install it via the normal way through the admin web interface, or through the CLI. More information can be found at [the repo of the package](https://github.com/YunoHost-Apps/akkoma_ynh).
## Questions
Questions and problems related to the YunoHost parts can be done through the [YunoHost channels](https://yunohost.org/en/help).
For questions about Akkoma, check out the [Akkoma community channels](../../#community-channels).
; Use private /tmp and /var/tmp folders inside a new file system namespace, which are discarded after the process stops.
@ -29,6 +38,8 @@ ProtectHome=true
ProtectSystem=full
; Sets up a new /dev mount for the process and only adds API pseudo devices like /dev/null, /dev/zero or /dev/random but not physical devices. Disabled by default because it may not work on devices like the Raspberry Pi.
PrivateDevices=false
; Ensures that the service process and all its children can never gain new privileges through execve().
floatingghost
Oneric
Norm
Haelwenn (lanodan) Monnier
Mark Felder
Erin Shepherd
Sandra Snan
Helge
Weblate
rick
stefan230
Paweł Świątkowski
Aria
Lain Soykaf
Yonle
Rohan Kumar
Koneko Toujou
yuki joou
y0nei
Joshua Goins
Clovis
mae
Mae
ilja
Walter Huf
XxXCertifiedForkliftDriverXxX
tusooa
kPherox
Alexander Tumin
Hélène
Miki Hau
lain
Denys Nykula
provable_ascent
midnight
Atsuko Karagi
sadposter
foxing
flisk
quad
Mahito TANNO
sfr
Brian Underwood
ilja
darkkirb
knova
ihor
Pascal Schmid
timorl
acuteaura
Paul Dawson
Tim Buchwaldt
duponin
r3g_5z
sn0w
timorl
Pleroma Consulting Services Buy Bitcoin NOW Real
astra akari
ave
@r3g_5z@plem.sapphic.site
