# Installing on OpenBSD This guide describes the installation and configuration of pleroma (and the required software to run it) on a single OpenBSD 6.6 server. For any additional information regarding commands and configuration files mentioned here, check the man pages [online](https://man.openbsd.org/) or directly on your server with the man command. #### Required software The following packages need to be installed: * elixir * gmake * ImageMagick * git * postgresql-server * postgresql-contrib To install them, run the following command (with doas or as root): ``` pkg_add elixir gmake ImageMagick git postgresql-server postgresql-contrib ``` Pleroma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt. #### Creating the pleroma user Pleroma will be run by a dedicated user, \_pleroma. Before creating it, insert the following lines in login.conf: ``` pleroma:\ :datasize-max=1536M:\ :datasize-cur=1536M:\ :openfiles-max=4096 ``` This creates a "pleroma" login class and sets higher values than default for datasize and openfiles (see [login.conf(5)](https://man.openbsd.org/login.conf)), this is required to avoid having pleroma crash some time after starting. Create the \_pleroma user, assign it the pleroma login class and create its home directory (/home/\_pleroma/): `useradd -m -L pleroma _pleroma` #### Clone pleroma's directory Enter a shell as the \_pleroma user. As root, run `su _pleroma -;cd`. Then clone the repository with `git clone -b stable https://git.pleroma.social/pleroma/pleroma.git`. Pleroma is now installed in /home/\_pleroma/pleroma/, it will be configured and started at the end of this guide. #### PostgreSQL Start a shell as the \_postgresql user (as root run `su _postgresql -` then run the `initdb` command to initialize postgresql: You will need to specify pgdata directory to the default (/var/postgresql/data) with the `-D ` and set the user to postgres with the `-U ` flag. This can be done as follows: ``` initdb -D /var/postgresql/data -U postgres ``` If you are not using the default directory, you will have to update the `datadir` variable in the /etc/rc.d/postgresql script. When this is done, enable postgresql so that it starts on boot and start it. As root, run: ``` rcctl enable postgresql rcctl start postgresql ``` To check that it started properly and didn't fail right after starting, you can run `ps aux | grep postgres`, there should be multiple lines of output. #### httpd httpd will have three fuctions: * redirect requests trying to reach the instance over http to the https URL * serve a robots.txt file * get Let's Encrypt certificates, with acme-client Insert the following config in httpd.conf: ``` # $OpenBSD: httpd.conf,v 1.17 2017/04/16 08:50:49 ajacoutot Exp $ ext_inet="" ext_inet6="" server "default" { listen on $ext_inet port 80 # Comment to disable listening on IPv4 listen on $ext_inet6 port 80 # Comment to disable listening on IPv6 listen on 127.0.0.1 port 80 # Do NOT comment this line log syslog directory no index location "/.well-known/acme-challenge/*" { root "/acme" request strip 2 } location "/robots.txt" { root "/htdocs/local/" } location "/*" { block return 302 "https://$HTTP_HOST$REQUEST_URI" } } types { } ``` Do not forget to change ** to your server's address(es). If httpd should only listen on one protocol family, comment one of the two first *listen* options. Create the /var/www/htdocs/local/ folder and write the content of your robots.txt in /var/www/htdocs/local/robots.txt. Check the configuration with `httpd -n`, if it is OK enable and start httpd (as root): ``` rcctl enable httpd rcctl start httpd ``` #### acme-client acme-client is used to get SSL/TLS certificates from Let's Encrypt. Insert the following configuration in /etc/acme-client.conf: ``` # # $OpenBSD: acme-client.conf,v 1.4 2017/03/22 11:14:14 benno Exp $ # authority letsencrypt- { #agreement url "https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf" api url "https://acme-v02.api.letsencrypt.org/directory" account key "/etc/acme/letsencrypt-privkey-.pem" } domain { domain key "/etc/ssl/private/.key" domain certificate "/etc/ssl/.crt" domain full chain certificate "/etc/ssl/.fullchain.pem" sign with letsencrypt- challengedir "/var/www/acme/" } ``` Replace ** by the domain name you'll use for your instance. As root, run `acme-client -n` to check the config, then `acme-client -ADv ` to create account and domain keys, and request a certificate for the first time. Make acme-client run everyday by adding it in /etc/daily.local. As root, run the following command: `echo "acme-client " >> /etc/daily.local`. Relayd will look for certificates and keys based on the address it listens on (see next part), the easiest way to make them available to relayd is to create a link, as root run: ``` ln -s /etc/ssl/.fullchain.pem /etc/ssl/.crt ln -s /etc/ssl/private/.key /etc/ssl/private/.key ``` This will have to be done for each IPv4 and IPv6 address relayd listens on. #### relayd relayd will be used as the reverse proxy sitting in front of pleroma. Insert the following configuration in /etc/relayd.conf: ``` # $OpenBSD: relayd.conf,v 1.4 2018/03/23 09:55:06 claudio Exp $ ext_inet="" ext_inet6="" table { 127.0.0.1 } table { 127.0.0.1 } http protocol plerup { # Protocol for upstream pleroma server #tcp { nodelay, sack, socket buffer 65536, backlog 128 } # Uncomment and adjust as you see fit tls ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305" tls ecdhe secp384r1 # Forward some paths to the local server (as pleroma won't respond to them as you might want) pass request quick path "/robots.txt" forward to # Append a bunch of headers match request header append "X-Forwarded-For" value "$REMOTE_ADDR" # This two header and the next one are not strictly required by pleroma but adding them won't hurt match request header append "X-Forwarded-By" value "$SERVER_ADDR:$SERVER_PORT" match response header append "X-XSS-Protection" value "1; mode=block" match response header append "X-Permitted-Cross-Domain-Policies" value "none" match response header append "X-Frame-Options" value "DENY" match response header append "X-Content-Type-Options" value "nosniff" match response header append "Referrer-Policy" value "same-origin" match response header append "X-Download-Options" value "noopen" match response header append "Content-Security-Policy" value "default-src 'none'; base-uri 'self'; form-action 'self'; img-src 'self' data: https:; media-src 'self' https:; style-src 'self' 'unsafe-inline'; font-src 'self'; script-src 'self'; connect-src 'self' wss://CHANGEME.tld; upgrade-insecure-requests;" # Modify "CHANGEME.tld" and set your instance's domain here match request header append "Connection" value "upgrade" #match response header append "Strict-Transport-Security" value "max-age=31536000; includeSubDomains" # Uncomment this only after you get HTTPS working. # If you do not want remote frontends to be able to access your Pleroma backend server, comment these lines match response header append "Access-Control-Allow-Origin" value "*" match response header append "Access-Control-Allow-Methods" value "POST, PUT, DELETE, GET, PATCH, OPTIONS" match response header append "Access-Control-Allow-Headers" value "Authorization, Content-Type, Idempotency-Key" match response header append "Access-Control-Expose-Headers" value "Link, X-RateLimit-Reset, X-RateLimit-Limit, X-RateLimit-Remaining, X-Request-Id" # Stop commenting lines here } relay wwwtls { listen on $ext_inet port https tls # Comment to disable listening on IPv4 listen on $ext_inet6 port https tls # Comment to disable listening on IPv6 protocol plerup forward to port 4000 check http "/" code 200 forward to port 80 check http "/robots.txt" code 200 } ``` Again, change ** to your server's address(es) and comment one of the two *listen* options if needed. Also change *wss://CHANGEME.tld* to *wss://*. Check the configuration with `relayd -n`, if it is OK enable and start relayd (as root): ``` rcctl enable relayd rcctl start relayd ``` #### pf Enabling and configuring pf is highly recommended. In /etc/pf.conf, insert the following configuration: ``` # Macros if="" authorized_ssh_clients="any" # Skip traffic on loopback interface set skip on lo # Default behavior set block-policy drop block in log all pass out quick # Security features match in all scrub (no-df random-id) block in log from urpf-failed # Rules pass in quick on $if inet proto icmp to ($if) icmp-type { echoreq unreach paramprob trace } # ICMP pass in quick on $if inet6 proto icmp6 to ($if) icmp6-type { echoreq unreach paramprob timex toobig } # ICMPv6 pass in quick on $if proto tcp to ($if) port { http https } # relayd/httpd pass in quick on $if proto tcp from $authorized_ssh_clients to ($if) port ssh ``` Replace ** by your server's network interface name (which you can get with ifconfig). Consider replacing the content of the authorized\_ssh\_clients macro by, for exemple, your home IP address, to avoid SSH connection attempts from bots. Check pf's configuration by running `pfctl -nf /etc/pf.conf`, load it with `pfctl -f /etc/pf.conf` and enable pf at boot with `rcctl enable pf`. #### Configure and start pleroma Enter a shell as \_pleroma (as root `su _pleroma -`) and enter pleroma's installation directory (`cd ~/pleroma/`). Then follow the main installation guide: * run `mix deps.get` * run `mix pleroma.instance gen` and enter your instance's information when asked * copy config/generated\_config.exs to config/prod.secret.exs. The default values should be sufficient but you should edit it and check that everything seems OK. * exit your current shell back to a root one and run `psql -U postgres -f /home/_pleroma/pleroma/config/setup_db.psql` to setup the database. * return to a \_pleroma shell into pleroma's installation directory (`su _pleroma -;cd ~/pleroma`) and run `MIX_ENV=prod mix ecto.migrate` As \_pleroma in /home/\_pleroma/pleroma, you can now run `LC_ALL=en_US.UTF-8 MIX_ENV=prod mix phx.server` to start your instance. In another SSH session/tmux window, check that it is working properly by running `ftp -MVo - http://127.0.0.1:4000/api/v1/instance`, you should get json output. Double-check that *uri*'s value is your instance's domain name. ##### Starting pleroma at boot An rc script to automatically start pleroma at boot hasn't been written yet, it can be run in a tmux session (tmux is in base). #### Create administrative user If your instance is up and running, you can create your first user with administrative rights with the following command as the \_pleroma user. ``` LC_ALL=en_US.UTF-8 MIX_ENV=prod mix pleroma.user new --admin ```