* Add support for followers synchronization on the receiving end
Check the `collectionSynchronization` attribute on `Create` and `Announce`
activities and synchronize followers from provided collection if possible.
* Add tests for followers synchronization on the receiving end
* Add support for follower synchronization on the sender's end
* Add tests for the sending end
* Switch from AS attributes to HTTP header
Replace the custom `collectionSynchronization` ActivityStreams attribute by
an HTTP header (`X-AS-Collection-Synchronization`) with the same syntax as
the `Signature` header and the following fields:
- `collectionId` to specify which collection to synchronize
- `digest` for the SHA256 hex-digest of the list of followers known on the
receiving instance (where “receiving instance” is determined by accounts
sharing the same host name for their ActivityPub actor `id`)
- `url` of a collection that should be fetched by the instance actor
Internally, move away from the webfinger-based `domain` attribute and use
account `uri` prefix to group accounts.
* Add environment variable to disable followers synchronization
Since the whole mechanism relies on some new preconditions that, in some
extremely rare cases, might not be met, add an environment variable
(DISABLE_FOLLOWERS_SYNCHRONIZATION) to disable the mechanism altogether and
avoid followers being incorrectly removed.
The current conditions are:
1. all managed accounts' actor `id` and inbox URL have the same URI scheme and
netloc.
2. all accounts whose actor `id` or inbox URL share the same URI scheme and
netloc as a managed account must be managed by the same Mastodon instance
as well.
As far as Mastodon is concerned, breaking those preconditions require extensive
configuration changes in the reverse proxy and might also cause other issues.
Therefore, this environment variable provides a way out for people with highly
unusual configurations, and can be safely ignored for the overwhelming majority
of Mastodon administrators.
* Only set follower synchronization header on non-public statuses
This is to avoid unnecessary computations and allow Follow-related
activities to be handled by the usual codepath instead of going through
the synchronization mechanism (otherwise, any Follow/Undo/Accept activity
would trigger the synchronization mechanism even if processing the activity
itself would be enough to re-introduce synchronization)
* Change how ActivityPub::SynchronizeFollowersService handles follow requests
If the remote lists a local follower which we only know has sent a follow
request, consider the follow request as accepted instead of sending an Undo.
* Integrate review feeback
- rename X-AS-Collection-Synchronization to Collection-Synchronization
- various minor refactoring and code style changes
* Only select required fields when computing followers_hash
* Use actor URI rather than webfinger domain in synchronization endpoint
* Change hash computation to be a XOR of individual hashes
Makes it much easier to be memory-efficient, and avoid sorting discrepancy issues.
* Marginally improve followers_hash computation speed
* Further improve hash computation performances by using pluck_each
There are edge cases where requests to certain hosts timeout when
using the vanilla HTTP.rb gem, which the goldfinger gem uses. Now
that we no longer need to support OStatus servers, webfinger logic
is so simple that there is no point encapsulating it in a gem, so
we can just use our own Request class. With that, we benefit from
more robust timeout code and IPv4/IPv6 resolution.
Fix#14091
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Do not serve account actors at all in limited federation mode
When an account is fetched without a signature from an allowed instance,
return an error.
This isn't really an improvement in security, as the only information that was
previously returned was required protocol-level info, and the only personal bit
was the existence of the account. The existence of the account can still be
checked by issuing a webfinger query, as those are accepted without signatures.
However, this change makes it so that unallowed instances won't create account
records on their end when they find a reference to an unknown account.
The previous behavior of rendering a limited list of fields, instead of not
rendering the actor at all, was in order to prevent situations in which two
instances in Authorized Fetch mode or Limited Federation mode would fail to
reach each other because resolving an account would require a signed query…
from an account which can only be fetched with a signed query itself. However,
this should now be fine as fetching accounts is done by signing on behalf of
the special instance actor, which does not require any kind of valid signature
to be fetched.
* Fix tests
* Check for and record reblog info atomically
Instead of using ZREVRANK to determine whether a reblog is a new reblog or not,
use ZADD's NX option to perform the check/addition option atomically.
* Replace ZREVRANK call with ZSCORE key which is more efficient
* Make tests a bit stricter
* Fix off-by-one
* Add database support for list show-reply preferences
* Add backend support to read and update list-specific show_replies settings
* Add basic UI to set list replies setting
* Add specs for list replies policy
* Switch "cycling" reply policy link to a set of radio inputs
* Capitalize replies_policy strings
* Change radio button design to be consistent with that of the directory explorer
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* Increase DNS timeout from 1 second to 5 seconds for MX check
1 seconds is rather short when using a recursive DNS resolver which
hasn't got a cached result already available. Use 5 seconds instead,
which is the timeout value we use for outgoing HTTP queries.
* Add more precise error messages for invalid e-mail addresses
* Change content-type to be always computed from file data
Restore previous behavior, detecting the content-type isn't very
expensive, and some instances may serve files as application/octet-stream
regardless of their true type, making fetching media from them fail, while
it used to work pre-3.2.0.
* Add test
* Fix not handling Undo on some activity types when they aren't inlined
When receiving an Undo for a non-inlined activity, try looking it up in
database using the URI. The queries are ad-hoc because we don't have a global
index of object URIs, and not all activity types are stored in database with
an index on their URI.
Announces are just statuses, and have an index on URIs, so this check can
be done efficiently.
Accepts cannot be handled at all because we don't record their URI at any
point.
Follows don't have an index on URI, but they have an index on the issuing
account, which should make such queries largely manageable.
Likes don't have an index on URI, they have an index on the issuing account,
but the number of favs per account may be very high, so I decided not to
handle that.
Blocks don't have an index on URI, but they have an index on the issuing
account, which should make such queries largely manageable.
In all cases, if an Undo could not be handled properly, we call `delete_later!`
because that does not require us to know more than the URI of the undone
property.
* Add tests
* Make newer blocks overwrite older ones
Allows re-synchronizing block info by re-blocking and un-blocking again
when the original Undo Block has been lost.
* Add tests for some cachable responses
This only covers responses that we should have managed to make cachable
so far. It's not the case of all responses that should be cachable in
the end.
* Fix RSS feeds not being cachable
* Change move handler to carry blocks and mutes over
When user A blocks user B and B moves to a new account C, make A block C
accordingly.
Note that it only works if A's instance is aware of the Move, that is,
if B is on A's instance or has followers there.
* Also notify instances with known people blocking you when moving
* Add automatic account notes when blocking/muting an account that had no note
* Add UserNote model
* Add UI for user notes
* Put comment in relationships entity
* Add API to create user notes
* Copy user notes to new account when receiving a Move activity
* Address some of the review remarks
* Replace modal by inline edition
* Please CodeClimate
* Button design changes
* Change design again
* Cancel note edition when pressing Escape
* Fixes
* Tweak design again
* Move “Add note” item, and allow users to add notes to themselves
* Rename UserNote into AccountNote, rename “comment” Relationship attribute to “note”
- Change audio files to not be stripped of metadata
- Automatically extract cover art from audio if it exists
- Add `thumbnail` parameter to `POST /api/v1/media`, `POST /api/v2/media` and `PUT /api/v1/media/:id`
- Add `icon` to represent it in attachments in ActivityPub
- Fix `preview_url` containing URL of missing missing image when there is no thumbnail instead of null
- Fix duration of audio not being displayed on public pages until the file is loaded
* Split media cleanup from reject-media domain blocks to its own service
* Slightly improve ClearDomainMediaService error handling
* Lower DomainClearMediaWorker to lowest-priority queue
* Do not catch ActiveRecord::RecordNotFound in domain block workers
* Fix DomainBlockWorker spec labels
* Add some specs
* Change domain blocks to immediately mark accounts as suspended
Rather than doing so sequentially, account after account, while cleaning
their data. This doesn't change much about the time the block takes to
complete, but it immediately prevents interaction with the blocked domain,
while up to now, it would only be guaranteed when the process ends.
* Improve RSS entries for statuses
- Render polls in both accounts and tags serializers
- Refactor RSS serializers
- Change title preview to include ellipsis when truncated
- Change title preview to show CW instead of toot text
- Add tests
* Remove title from OEmbed serialization
Twitter doesn't serialize title either, and tihs allows us to move the
title formatting code to the RSS serializers.
Also:
- Fix locks not being removed when jobs go to the dead job queue
- Add UI for managing locks to the Sidekiq dashboard
- Remove unused Sidekiq workers
Fix#13349
Mastodon enforces the “sensitive” flag on media attachments whenever a toot
is posted with a Content Warning. However, it does so *after* potentially
converting the Content Warning to toot text (when there is no toot text),
which leads to inconsistent and surprising behavior for API clients.
This commit fixes this inconsistency.
Instead of returning a signature verification error, pretend there
was no signature (i.e., this does not allow access to resources that
need a valid signature), so public resources can still be fetched
Fix#13011
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
* Fix wrong grouping in Twitter valid_url regex
* Add support for xmpp URIs
Fixes#9776
The difficult part is autolinking, because Twitter-text's extractor does
some pretty ad-hoc stuff to find things that “look like” URLs, and XMPP
URIs do not really match the assumptions of that lib, so it doesn't sound
wise to try to shoehorn it into the existing regex.
This is why I used a specific regex (very close, although slightly more
permissive than the RFC), and a specific scan function (a simplified version
of the generalized one from Twitter).
* Remove leading “xmpp:” from auto-linked text
Fixes#12795
It was already possible to create domain blocks for TLDs, but those
weren't enforced, nor editable. This commit changes it so that they
are enforced and editable.
* Add feature test that tests behaviour of profile name and bio
* Fix rubocop style errors in Login Spec.
* DRY log_in_spec by reusing the stories helper
Co-authored-by: Eugen Rochko <eugen@zeonfederated.com>
* Hide blocked, muted, and blocked-by users from toot favourite lists
* Hide blocked, muted, and blocked-by users from toot reblog lists
* Hide blocked, muted, and blocked-by users from followers/following (API)
* Fix tests
* Hide blocked, muted, and blocked-by users from followers/following on public pages
This changes the REST API to return unicode domains in the `acct`
attribute instead of punycode, and to render unicode instead of
punycode on public HTML pages as well.
Fix#7812, fix#12246
* Remove “protocol” argument and return value, as only ActivityPub is supported
* Remove FetchRemoteAccountService, only use ActivityPub::FetchRemoteAccountService
* Fix tests
* Revert "Fix ignoring whole status because of one invalid hashtag (#11621)"
This reverts commit dff46b260b.
* Fix statuses being rejected because of invalid hashtag names
* Add spec for invalid hashtag names in statuses
* Add test for featured tags controller
This adds support for Event AP type in Mastodon. Events are converted
into toots by taking their title (AS name) and their URL (AP ID). Event
picture is also brought in if available.
Testable by fetching event content from https://test.mobilizon.org
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* Add follow_request notification type
The notification type already existed in the backend but was never pushed
to the front-end. This also means translation strings were also available
for the backend, from the notification mailer.
Unlike other notification types, these are off by default, to match what
I remember of Gargron's view on the topic: that follow requests should not
clutter notifications and should instead be reviewed at the user's own
leisure in the dedicated column.
Since follow requests have their own column, I've deemed it unnecessary to
add a specific tab for them in the notification quick filter.
* Show follow request link in single-column if there are pending requests, even if account isn't locked
* Push follow requests from notifications to the follow_requests list
* Offer to accept or reject follow request from the notification
* Redesign follow request notification
* add youtube oembed endpoint
* add check for oembed endpoint
* change unless for a more readable if
* clear blank lines
* endpoint via https
* Fix string literal in condition
* use cache for endpoints
* use cache for endpoints
* clean up and adding check
* clean up and remove redundant return
* add html check
* add false to return
* use double quotes
* use double quotes
* Clean up
* make it not return http 400 when passing and empty source argument
* create a spec for the empty source hash bug
* compact checks for nil, empty? parameters
* use nil.blank? instead checking for nil
* Add backend support for bookmarks
Bookmarks behave like favourites, except they aren't shared with other
users and do not have an associated counter.
* Add spec for bookmark endpoints
* Add front-end support for bookmarks
* Introduce OAuth scopes for bookmarks
* Add bookmarks to archive takeout
* Fix migration
* Coding style fixes
* Fix rebase issue
* Update bookmarked_statuses to latest UI changes
* Update bookmark actions to properly reflect status changes in state
* Add bookmarks item to single-column layout
* Make active bookmarks red
* Fix being able to follow oneself by moving to an account that was following the old one
* Add specs
* Add spec to catch MoveWorker issue with local followers following both accounts
* Fix move worker breaking when a local account follows both source and target accounts
* Fix migration from remote to local account not sending Undo Follow
* Fix show_reblogs not being preserved for moved account's followers
Change the behaviour of remotable concern. Previously, it would skip
downloading an attachment if the stored remote URL is identical to
the new one. Now it would not be skipped if the attachment is not
actually currently stored by Paperclip.
Fetching statuses from all followed accounts at once takes too long
within Postgres. Fetching them one by one and merging in Ruby
could be a lot less resource-intensive
Because the query for dynamically fetching the home timeline is so
heavy, we can no longer offer it when the home timeline is missing
* Add test to handle suspended and missing users in BootstrapTimelineService
* Fix BootstrapTimelineService crashing when bootstrapped accounts are invalid
It's possible that after commit callbacks were not firing when
exceptions occurred in the process. Also, the default Sidekiq
strategy does not push indexing jobs immediately, which is not
necessary and could be part of the issue too.
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* Add some additional node info stuff
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* expanding this to include federation info
* codeclimate feedback
* CC feedback
* using activeserializers seems like a good idea...
* get rid of draft 2.1 version
* Reimplement 2.1, also fix metaData -> metadata
* Fix metaData -> metadata here too
* Fix nodeinfo 2.1 tests
* Implement cache for monthly user aggregate
* Useless
* Remove ostatus from the list of supported protocols
* Fix nodeinfo's open_registration reading obsolete setting variable
* Only serialize domain blocks with user-facing limitations
* Do not needlessly list noop severity in nodeinfo
* Only serialize domain blocks info in nodeinfo when they are set to be displayed to everyone
* Enable caching for nodeinfo endpoints
* Fix rendering nodeinfo
* CodeClimate fixes
* Please CodeClimate
* Change InstancePresenter#active_user_count_months for clarity
* Refactor NodeInfoSerializer#metadata
* Remove nodeinfo 2.1 support as the schema doesn't exist
* Clean-up
* Change silenced accounts to require approval on follow
* Also require approval for follows by people explicitly muted by target accounts
* Do not auto-accept silenced or muted accounts when switching from locked to unlocked
* Add `follow_requests_count` to verify_credentials
* Show “Follow requests” menu item if needed even if account is locked
* Add tests
* Correctly reflect that follow requests weren't auto-accepted when local account is silenced
* Accept follow requests from user-muted accounts to avoid leaking mutes
The reason for unattaching media instead of removing it is to support
delete & redraft functionality, but remote or staff-removed statuses
will never be redrafted, so the media should be deleted immediately
* Add more accurate hashtag search
Using ElasticSearch to index hashtags with edge n-grams and score
them by usage within the last 7 days since last activity. Only
hashtags that have been reviewed and are listable can appear in
searches, unless they match the query exactly
* Fix search analyzer dropping non-ascii characters
* Add more accurate account search
When ElasticSearch is available, a more accurate search is implemented:
- Using edge n-gram index for acct and display name
- Using asciifolding and cjk width normalization on display names
- Using Gaussian decay on account activity for additional scoring (recency)
- Using followers/friends ratio for additional scoring (spamminess)
- Using followers number for additional scoring (size)
The exact match precedence only takes effect when the input conforms
to the username format and the username part of it is complete, i.e.
when the user started typing the domain part.
* Support single-letter usernames
* Fix tests
* Fix not picking up account updates
* Add weights and normalization for scores, skip zero terms queries
* Use local counts for accounts index, adjust search parameters
* Fix mistakes
* Using updated_at of accounts is inadequate for remote accounts
* Add database columns for adding notes to domain blocks/restrctions
* Add admin UI to set private and public comments when blocking a domain
* Add text for private and public comments on domain blocks
* Show domain block comments in admin UI
* Add comments to the domain block undo page
* Make UnblockDomainService more robust regarding upgraded domain blocks
* Allow editing domain blocks
* Rename button from “undo domain block” to “view domain block” in account admin UI
* Change test to unsilence silenced users from upgraded blocks
Fix#271
Add back the `GET /api/v1/trends` API with the caveat that it does
not return tags that have not been allowed to trend by the staff.
When a hashtag begins to trend (internally) and that hashtag has
not been previously reviewed by the staff, the staff is notified.
The new admin UI for hashtags allows filtering hashtags by where
they are used (e.g. in the profile directory), whether they have
been reviewed or are pending reviewal, they show by how many people
the hashtag is used in the directory, how many people used it
today, how many statuses with it have been created today, and it
allows fixing the name of the hashtag to make it more readable.
The disallowed hashtags feature has been reworked. It is now
controlled from the admin UI for hashtags instead of from
the file `config/settings.yml`
* Change hashtag search to only return results that have trended in the past
A way to eliminate typos and other one-off "junk" results
* Fix excluding exact matches that don't have a score
* Fix tests
* Check to make sure usernames with '.' cannot be created
* Add test for instance actor account name conflicts
This makes sure that migration 20190715164535_add_instance_actor
won't fail if there's already an account that is named the same
as the domain (minus the .)
* Put the test into the correct context...
* Add another test to split this into two validations
* Don't delete periods when validating username uniqueness (#11392)
The 20190715164535_add_instance_actor migration fails if there's
already a username similar to the domain name, e.g. if you are
'vulpine.club' and have a user named 'vulpineclub', validation
fails.
Upon further review, usernames with periods are dropped by the
regular expression in the Account class, so we don't need to
worry about it here.
Fixes#11392
Allow access to account settings, 2FA, authorized applications, and
account deletions to unconfirmed and pending users, as well as
users who had their accounts disabled. Suspended users cannot update
their e-mail or password or delete their account.
Display account status on account settings page, for example, when
an account is frozen, limited, unconfirmed or pending review.
After sign up, login users straight away and show a simple page that
tells them the status of their account with links to account settings
and logout, to reduce onboarding friction and allow users to correct
wrongly typed e-mail addresses.
Move the final sign-up step of SSO integrations to be the same
as above to reduce code duplication.
* Play animated custom emoji on hover in status
* Play animated custom emoji on hover in display names
* Play animated custom emoji on hover in bios/bio fields
* Add support for animation on hover on public pages emojis too
* Fix tests
* Code style cleanup
* Add support for an instance actor
* Skip username validation for local Application accounts
* Add migration script to create instance actor
* Make Codeclimate happy
* Switch to id -99 for instance actor
* Remove unused `icon` and `image` attributes from instance actor
* Use if/elsif/else instead of return + ternary operator
* Add instance actor to fresh installs
* Use instance actor as instance representative
Use instance actor for forwarding reports, relay operations, and spam
auto-reporting.
* Seed database in test environment
* Fix single-user mode
* Fix tests
* Fix specs to accomodate for an extra `Account`
* Auto-reject follows on instance actor
Following an instance actor might make sense, but we are not handling that
right now, so auto-reject.
* Fix webfinger lookup and serialization for instance actor
* Rename instance actor
* Make it clear in the HTML view that the instance actor should not be blocked
* Raise cache time for instance actor as there's no dynamic content
* Re-use /about/more with a flash message for instance actor profile
* Add a spam check
* Use Nilsimsa to generate locality-sensitive hashes and compare using Levenshtein distance
* Add more tests
* Add exemption when the message is a reply to something that mentions the sender
* Use Nilsimsa Compare Value instead of Levenshtein distance
* Use MD5 for messages shorter than 10 characters
* Add message to automated report, do not add non-public statuses to
automated report, add trust level to accounts and make unsilencing
raise the trust level to prevent repeated spam checks on that account
* Expire spam check data after 3 months
* Add support for local statuses, reduce expiration to 1 week, always create a report
* Add content warnings to the spam check and exempt empty statuses
* Change Nilsimsa threshold to 95 and make sure removed statuses are removed from the spam check
* Add all matched statuses into automatic report
* Remove Salmon and PubSubHubbub endpoints
* Add error when trying to follow OStatus accounts
* Fix new accounts not being created in ResolveAccountService
* Add request pool to improve delivery performance
Fix#7909
* Ensure connection is closed when exception interrupts execution
* Remove Timeout#timeout from socket connection
* Fix infinite retrial loop on HTTP::ConnectionError
* Close sockets on failure, reduce idle time to 90 seconds
* Add MAX_REQUEST_POOL_SIZE option to limit concurrent connections to the same server
* Use a shared pool size, 512 by default, to stay below open file limit
* Add some tests
* Add more tests
* Reduce MAX_IDLE_TIME from 90 to 30 seconds, reap every 30 seconds
* Use a shared pool that returns preferred connection but re-purposes other ones when needed
* Fix wrong connection being returned on subsequent calls within the same thread
* Reduce mutex calls on flushes from 2 to 1 and add test for reaping
* Change domain blocks to automatically support subdomains
If a more authoritative domain is blocked (example.com), then the
same block will be applied to a subdomain (foo.example.com)
* Match subdomains of existing accounts when blocking/unblocking domains
* Improve code style
* Fix poll API not requiring authentication on non-public polls
That API does not reveal the content of the status, i.e. the question
itself, nor who the author is, nor which status it belongs to, but it
does reveal the poll options and how many answers they got
Fix#10959
* Add test
* Add `from_account` to notifications API
this adds the ability to filter notifications by the account they
originated from
* passing a non-existent user should cause none to be returned
* Fix codeclimate warnings
* fix more codeclimate warnings
* make requested changes:
* use account id instead of user@domain
* name the param `account_id` instead of `from_account`
* Don't use `return` in a lambda
* Change note_length validator from 160 to 500
* Change input maxlength from 160 to 500
* update bio test from 160 to 500
* Multiply a string 30 times instead of 10
* Record account suspend/silence time and keep track of domain blocks
* Also unblock users who were suspended/silenced before dates were recorded
* Add tests
* Keep track of suspending date for users suspended through the CLI
* Show accurate number of accounts that would be affected by unsuspending an instance
* Change migration to set silenced_at and suspended_at
* Revert "Also unblock users who were suspended/silenced before dates were recorded"
This reverts commit a015c65d2d1e28c7b7cfab8b3f8cd5fb48b8b71c.
* Switch from using suspended and silenced to suspended_at and silenced_at
* Add post-deployment migration script to remove `suspended` and `silenced` columns
* Use Account#silence! and Account#suspend! instead of updating the underlying property
* Add silenced_at and suspended_at migration to post-migration
* Change account fabricator to translate suspended and silenced attributes
* Minor fixes
* Make unblocking domains always retroactive
* Prevent silenced local users from notifying remote users not following them
This is an attempt to extend the local restrictions of silenced users to the
federation.
* Add tests
* Add tests for making sure private status don't get sent over OStatus
* When trying to block an already-blocked domain, provide a link to the block
* Fix styling for links in flash messages
* Allow blocks to be upgraded but not downgraded
* Check that an invite link is valid before bypassing approval mode
Fixes#10656
* Add tests
* Only consider valid invite links in registration controller
* fixup
* Add "why do you want to join" field to invite requests
Fix#10512
* Remove unused translations
* Fix broken registrations when no invite request text is submitted
* Refactor imports
* Export show_reblogs when exporting list of followed users
* Add support for importing show_reblogs with following collection
* Fix tests
* Revert "Fix filtering of favourited_by, reblogged_by, followers and following (#10447)"
This reverts commit 120544067f.
* Revert "Hide blocking accounts from blocked users (#10442)"
This reverts commit 62bafa20a1.
* Improve blocked view of profiles
- Change "You are blocked" to "Profile unavailable"
- Hide following/followers in API when blocked
- Disable follow button and show "Profile unavailable" on public profile as well
* Revert "Add indication that you have been blocked in web UI (#10420)"
This reverts commit bd02ec6daa.
* Revert "Add `blocked_by` relationship to the REST API (#10373)"
This reverts commit 9745de883b.
* Hide blocking accounts from search results
* Filter blocking accouts from account followers
* Filter blocking accouts from account's following accounts
* Filter blocking accounts from “reblogged by” and “favourited by” lists
* Remove blocking account from URL search
* Return 410 on trying to fetch user data from a user who blocked us
* Return 410 in /api/v1/account/statuses for suspended or blocking accounts
* Fix status filtering when performing URL search
* Restore some React improvements
Restore some cleanup from bd02ec6daa
* Refactor by adding `without_blocking` scope
* Check if image value is nil? before creating an image
Check if uploaded images aren't nil before creating SiteUpload models
for them.
* Validate presence of file in SiteUpload
* Fix file presence validation
* Fabricate SiteUpload#file
* Add link to Creative Commons license
* create account_identity_proofs table
* add endpoint for keybase to check local proofs
* add async task to update validity and liveness of proofs from keybase
* first pass keybase proof CRUD
* second pass keybase proof creation
* clean up proof list and add badges
* add avatar url to keybase api
* Always highlight the “Identity Proofs” navigation item when interacting with proofs.
* Update translations.
* Add profile URL.
* Reorder proofs.
* Add proofs to bio.
* Update settings/identity_proofs front-end.
* Use `link_to`.
* Only encode query params if they exist.
URLs without params had a trailing `?`.
* Only show live proofs.
* change valid to active in proof list and update liveness before displaying
* minor fixes
* add keybase config at well-known path
* extremely naive feature flagging off the identity proof UI
* fixes for rubocop
* make identity proofs page resilient to potential keybase issues
* normalize i18n
* tweaks for brakeman
* remove two unused translations
* cleanup and add more localizations
* make keybase_contacts an admin setting
* fix ExternalProofService my_domain
* use Addressable::URI in identity proofs
* use active model serializer for keybase proof config
* more cleanup of keybase proof config
* rename proof is_valid and is_live to proof_valid and proof_live
* cleanup
* assorted tweaks for more robust communication with keybase
* Clean up
* Small fixes
* Display verified identity identically to verified links
* Clean up unused CSS
* Add caching for Keybase avatar URLs
* Remove keybase_contacts setting
* Add specs for ActionLogHelper
* Make some methods private
methods below never referenced from outside of their module:
- #linkable_log_target
- #log_target_from_history
* Squish username before validation (#10101)
Fix#10101
* Move before_validation hook to a private method
Also add Unicode wite-spaces to the spec to support the use of squish
over strip.
* Add polls
Fix#1629
* Add tests
* Fixes
* Change API for creating polls
* Use name instead of content for votes
* Remove poll validation for remote polls
* Add polls to public pages
* When updating the poll, update options just in case they were changed
* Fix public pages showing both poll and other media
* Fetch up to 5 replies when discovering a new remote status
This is used for resolving threads downwards. The originating
server must add a “replies” attributes with such replies for it to
be useful.
* Add some tests for ActivityPub::FetchRepliesWorker
* Add specs for ActivityPub::FetchRepliesService
* Serialize up to 5 public self-replies for ActivityPub notes
* Add specs for ActivityPub::NoteSerializer
* Move exponential backoff logic to a worker concern
* Fetch first page of paginated collections when fetching thread replies
* Add specs for paginated collections in replies
* Move Note replies serialization to a first CollectionPage
The collection isn't actually paginable yet as it has no id nor
a `next` field. This may come in another PR.
* Use pluck(:uri) instead of map(&:uri) to improve performances
* Fix fetching replies when they are in a CollectionPage
* Add type, limit, offset, min_id, max_id, account_id to search API
Fix#8939
* Make the offset work on accounts and hashtags search as well
* Assure brakeman we are not doing mass assignment here
* Do not allow paginating unless a type is chosen
* Fix search query and index id field on statuses instead of created_at
* Filter incoming Announce activities by relation to local activity
Reject if announcer is not followed by local accounts, and is not
from an enabled relay, and the object is not a local status
Follow-up to #10005
* Fix tests
* When self-boosting, embed original toot into Announce serialization
* Process unknown self-boosts from Announce object if it is more than an URI
* Add some self-boost specs
* Only serialize private toots in self-Announces
* Add hashtag filter to profiles
GET /@:username/tagged/:hashtag
GET /api/v1/accounts/:id/statuses?tagged=:hashtag
* Display featured hashtags on public profile
* Use separate model for featured tags
* Update featured hashtag counters on-write
* Limit featured tags to 10
* Add test for not persisting status when attaching media to scheduled toot
* Prevent status used for validation from being persisted to the database
Fixes#9893
Thanks to tateisu for the help investigating this.
Mastodon expects remote servers to remove follow relationships upon receiving
a Block. However, the spec only evokes Block activities in a C2S context, never
in a S2S context.
This PR, in addition to federating the Block, explicitly sends a Reject for any
affected follow relationship, which makes a bit more sense with regards to the
spec.
* Fix undefined method error in sidekiq
Body can be not nil but still be empty, which causes a
`NoMethodError: undefined method `[]' for nil:NilClass` further in the
code. This checks for an empty body to avoid the issue.
* Fix codeclimate issue
- Reduce time-to-digest from 20 to 7 days
- Fetch mentions starting from +1 day since last login
- Fix case when last login is more recent than last e-mail
- Do not render all mentions, only 40, but show number in subject
- Do not send digest to moved accounts
- Do send digest to silenced accounts
* Ensure blocked user unfollows blocker if Block/Undo Block are processed out of order
* Add specs for Block causing unfollow and for out-of-order Block + Undo
* Do not LDS-sign Follow, Accept, Reject, Undo, Block
* Do not use LDS for Create activities of private toots
* Minor cleanup
* Ignore unsigned activities instead of misattributing them
* Use status.distributable? instead of querying visibility directly
* Add REST API for creating an account
The method is available to apps with a token obtained via the client
credentials grant. It creates a user and account records, as well as
an access token for the app that initiated the request. The user is
unconfirmed, and an e-mail is sent as usual.
The method returns the access token, which the app should save for
later. The REST API is not available to users with unconfirmed
accounts, so the app must be smart to wait for the user to click a
link in their e-mail inbox.
The method is rate-limited by IP to 5 requests per 30 minutes.
* Redirect users back to app from confirmation if they were created with an app
* Add tests
* Return 403 on the method if registrations are not open
* Require agreement param to be true in the API when creating an account
* Add moderation warnings
Replace individual routes for disabling, silencing, and suspending
a user, as well as the report update route, with a unified account
action controller that allows you to select an action (none,
disable, silence, suspend) as well as whether it should generate an
e-mail notification with optional custom text. That notification,
with the optional custom text, is saved as a warning.
Additionally, there are warning presets you can configure to save
time when performing the above.
* Use Account#local_username_and_domain
* Add failing test for windows-1251 link cards
* Ignore low-confidence CharlockHolmes guesses
Fixes#9466
* Fix no method error when charlock holmes cannot detect charset
* Make custom emoji domains case sensitive #9351
* Fixup style in downcase_domain to comply with codeclimate.
* switch if! to unless
* Don't use transactions, operate in batches.
Also revert spurious schema change.
Fixes#9309
This only allows hyphens in the middle of a username, much like dots,
although I don't have a compelling reason to do so other than keeping
the changes minimal.
* Improve overview of accounts in admin UI
- Display suspended status, role, last activity and IP prominently
- Default to showing local accounts
- Default to not showing suspended accounts
* Remove unused strings
* Fix tests
* Allow filtering accounts by IP mask
* Ensure replied-to is a status not a boost
* Consider case of not a reply
* Add test case for replying to boost
* Move reblog-reply resolution to model
* Remove unnecessary comment
* Fix connect timeout not being enforced
The loop was catching the timeout exception that should stop execution, so the next IP would no longer be within a timed block, which led to requests taking much longer than 10 seconds.
* Use timeout on each IP attempt, but limit to 2 attempts
* Fix code style issue
* Do not break Request#perform if no block given
* Update method stub in spec for Request
* Move timeout inside the begin/rescue block
* Use Resolv::DNS with timeout of 1 to get IP addresses
* Update Request spec to stub Resolv::DNS instead of Addrinfo
* Fix Resolve::DNS stubs in Request spec
* Eliminate extra accounts select query from FollowService
* Optimistically update follow state in web UI and hide loading bar
Fix#6205
* Asynchronize NotifyService in FollowService
And fix failing test
* Skip Webfinger resolve routine when called from FollowService if possible
If an account is ActivityPub, then webfinger re-resolving is not necessary
when called from FollowService. Improve options of ResolveAccountService
* Nascent tag menu on frontend
* Hook up frontend to search
* Tag intersection backend first pass
* Update yarnlock
* WIP
* Fix for tags not searching correctly
* Make radio buttons function
* Simplify radio buttons with modeOption
* Better naming
* Rearrange options
* Add all/any/none functionality on backend
* Small PR cleanup
* Move to service from scope
* Small cleanup, add proper service tests
* Don't use send with user input :D
* Set appropriate column header
* Handle auto updating timeline
* Fix up toggle function
* Use tag value correctly
* A bit more correct to use 'self' rather than 'all' in status scope
* Fix some style issues
* Fix more code style issues
* Style select dropdown more better
* Only use to_id'ed value to ensure no SQL injection
* Revamp frontend to allow for multiple selects
* Update backend / col header to account for more flexible tagging
* Update brakeman ignore
* Codeclimate suggestions
* Fix presenter tag_url
* Implement initial PR feedback
* Handle additional tag streaming
* CodeClimate tweak
* Add profile to json+ld in Accept
It's required by the ActivityPub spec
* Use headers['Content-type'] instead of mime_type
mime_type strips the profile from the content type, but it's still available raw in the headers hash
* Add test for ld+json with profile
* Do not hide boost notifications from followed people with hidden boosts
Not displaying boosts from a followed user in the Home timeline and not
having notifications when they reblog your own content are two very
separate concerns, tying them together seem counter-intuitive and unwanted.
* Update specs accordingly
* Add silent column to mentions
* Save silent mentions in ActivityPub Create handler and optimize it
Move networking calls out of the database transaction
* Add "limited" visibility level masked as "private" in the API
Unlike DMs, limited statuses are pushed into home feeds. The access
control rules between direct and limited statuses is almost the same,
except for counter and conversation logic
* Ensure silent column is non-null, add spec
* Ensure filters don't check silent mentions for blocks/mutes
As those are "this person is also allowed to see" rather than "this
person is involved", therefore does not warrant filtering
* Clean up code
* Use Status#active_mentions to limit returned mentions
* Fix code style issues
* Use Status#active_mentions in Notification
And remove stream_entry eager-loading from Notification
* Downcase signed_headers string before building the signed string
The HTTP Signatures draft does not mandate the “headers” field to be downcased,
but mandates the header field names to be downcased in the signed string, which
means that prior to this patch, Mastodon could fail to process signatures from
some compliant clients. It also means that it would not actually check the
Digest of non-compliant clients that wouldn't use a lowercased Digest field
name.
Thankfully, I don't know of any such client.
* Revert "Remove dead code (#8919)"
This reverts commit a00ce8c92c.
* Restore time window checking, change it to 12 hours
By checking the Date header, we can prevent replaying old vulnerable
signatures. The focus is to prevent replaying old vulnerable requests
from software that has been fixed in the meantime, so a somewhat long
window should be fine and accounts for timezone misconfiguration.
* Escape users' URLs when formatting them
Fixes possible HTML injection
* Escape all string interpolations in Formatter class
Slightly improve performance by reducing class allocations
from repeated Formatter#encode calls
* Fix code style issues
* Add conversations API
* Add web UI for conversations
* Add test for conversations API
* Add tests for ConversationAccount
* Improve web UI
* Rename ConversationAccount to AccountConversation
* Remove conversations on block and mute
* Change last_status_id to be a denormalization of status_ids
* Add optimistic locking
* Allow min_id pagination in Feed#get
* Add min_id pagination to home and list timeline APIs
* Add min_id pagination to account statuses, public and tag APIs
* Remove unused stub in reports API
* Use min_id pagination in notifications, favourites, and fix order
* Fix HomeFeed#from_database not using paginate_by_id
* Revert "Fix some icon names changed by the Font Awesome 5. (#8796)"
This reverts commit 3f9ec3de82.
* Revert "Migrate to font-awesome 5.0. (#8799)"
This reverts commit 8bae14591b.
* Revert "Fix some icons names, unavailable in fontawesome5 (free license). (#8792)"
This reverts commit b9c727a945.
* Revert "Update the icon name changed by the Font Awesome 5. (#8776)"
This reverts commit 17af4d27da.
* Revert "Add bot icon to bot avatars and migrate to newer version of Font Awesome (#8484)"
This reverts commit 4b794e134d.
* Verify link ownership with rel="me"
* Add explanation about verification to UI
* Perform link verifications
* Add click-to-copy widget for verification HTML
* Redesign edit profile page
* Redesign forms
* Improve responsive design of settings pages
* Restore landing page sign-up form
* Fix typo
* Support <link> tags, add spec
* Fix links not being verified on first discovery and passive updates
* Add force_login option to OAuth authorize page
For when a user needs to sign into an app from multiple accounts
on the same server
* When logging out from modal header, redirect back after re-login
CSFR-prevention is already implemented but adding this doesn't hurt.
A brief introduction to Same-Site cookies (and the difference between strict and
lax) can be found at
https://blog.mozilla.org/security/2018/04/24/same-site-cookies-in-firefox-60/
TLDR: We use lax since we want the cookies to be sent when the user navigates
safely from an external site.
* Add animate custom emoji param to embed pages
* Rename param, use it for avatars and gifs
* Fix issues pointed by codeclimate and breaking test
* Ignore brakeman warning
updates some "context" and "it" lines to have clearer explanations
updates "context" lines to properly describe function input, and "it" lines to describe results
