cheerfulstoic/akkoma
1
0
Fork 0
forked from AkkomaGang/akkoma
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merge branch 'develop' of git.pleroma.social:pleroma/pleroma into stats-genserver-fix

Browse source
This commit is contained in:
lain 2020-11-04 16:52:30 +01:00
commit 7bbc328d66
926 changed files with 16607 additions and 13709 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
.credo.exs
View file

@ -25,7 +25,7 @@
# #
# If you create your own checks, you must specify the source files for # If you create your own checks, you must specify the source files for
# them here, so they can be loaded by Credo before running the analysis. # them here, so they can be loaded by Credo before running the analysis.
requires: [], requires: ["./test/credo/check/consistency/file_location.ex"],
# #
# Credo automatically checks for updates, like e.g. Hex does. # Credo automatically checks for updates, like e.g. Hex does.
# You can disable this behaviour below: # You can disable this behaviour below:
@ -71,7 +71,6 @@
# set this value to 0 (zero). # set this value to 0 (zero).
{Credo.Check.Design.TagTODO, exit_status: 0}, {Credo.Check.Design.TagTODO, exit_status: 0},
{Credo.Check.Design.TagFIXME, exit_status: 0}, {Credo.Check.Design.TagFIXME, exit_status: 0},
{Credo.Check.Readability.FunctionNames}, {Credo.Check.Readability.FunctionNames},
{Credo.Check.Readability.LargeNumbers}, {Credo.Check.Readability.LargeNumbers},
{Credo.Check.Readability.MaxLineLength, priority: :low, max_length: 100}, {Credo.Check.Readability.MaxLineLength, priority: :low, max_length: 100},
@ -91,7 +90,6 @@
{Credo.Check.Readability.VariableNames}, {Credo.Check.Readability.VariableNames},
{Credo.Check.Readability.Semicolons}, {Credo.Check.Readability.Semicolons},
{Credo.Check.Readability.SpaceAfterCommas}, {Credo.Check.Readability.SpaceAfterCommas},
{Credo.Check.Refactor.DoubleBooleanNegation}, {Credo.Check.Refactor.DoubleBooleanNegation},
{Credo.Check.Refactor.CondStatements}, {Credo.Check.Refactor.CondStatements},
{Credo.Check.Refactor.CyclomaticComplexity}, {Credo.Check.Refactor.CyclomaticComplexity},
@ -102,7 +100,6 @@
{Credo.Check.Refactor.Nesting}, {Credo.Check.Refactor.Nesting},
{Credo.Check.Refactor.PipeChainStart}, {Credo.Check.Refactor.PipeChainStart},
{Credo.Check.Refactor.UnlessWithElse}, {Credo.Check.Refactor.UnlessWithElse},
{Credo.Check.Warning.BoolOperationOnSameValues}, {Credo.Check.Warning.BoolOperationOnSameValues},
{Credo.Check.Warning.IExPry}, {Credo.Check.Warning.IExPry},
{Credo.Check.Warning.IoInspect}, {Credo.Check.Warning.IoInspect},
@ -131,6 +128,7 @@
# Custom checks can be created using `mix credo.gen.check`. # Custom checks can be created using `mix credo.gen.check`.
# #
{Credo.Check.Consistency.FileLocation}
] ]
} }
] ]

2
.gitignore vendored
View file

@ -27,6 +27,8 @@ erl_crash.dump
# variables. # variables.
/config/*.secret.exs /config/*.secret.exs
/config/generated_config.exs /config/generated_config.exs
/config/*.env
# Database setup file, some may forget to delete it # Database setup file, some may forget to delete it
/config/setup_db.psql /config/setup_db.psql

10
.gitlab-ci.yml
View file

@ -25,6 +25,8 @@ before_script:
- apt-get update && apt-get install -y cmake - apt-get update && apt-get install -y cmake
- mix local.hex --force - mix local.hex --force
- mix local.rebar --force - mix local.rebar --force
- apt-get -qq update
- apt-get install -y libmagic-dev
build: build:
stage: build stage: build
@ -59,7 +61,7 @@ unit-testing:
alias: postgres alias: postgres
command: ["postgres", "-c", "fsync=off", "-c", "synchronous_commit=off", "-c", "full_page_writes=off"] command: ["postgres", "-c", "fsync=off", "-c", "synchronous_commit=off", "-c", "full_page_writes=off"]
script: script:
- apt-get update && apt-get install -y libimage-exiftool-perl - apt-get update && apt-get install -y libimage-exiftool-perl ffmpeg
- mix deps.get - mix deps.get
- mix ecto.create - mix ecto.create
- mix ecto.migrate - mix ecto.migrate
@ -93,7 +95,7 @@ unit-testing-rum:
<<: *global_variables <<: *global_variables
RUM_ENABLED: "true" RUM_ENABLED: "true"
script: script:
- apt-get update && apt-get install -y libimage-exiftool-perl - apt-get update && apt-get install -y libimage-exiftool-perl ffmpeg
- mix deps.get - mix deps.get
- mix ecto.create - mix ecto.create
- mix ecto.migrate - mix ecto.migrate
@ -196,7 +198,7 @@ amd64:
variables: &release-variables variables: &release-variables
MIX_ENV: prod MIX_ENV: prod
before_script: &before-release before_script: &before-release
- apt-get update && apt-get install -y cmake - apt-get update && apt-get install -y cmake libmagic-dev
- echo "import Mix.Config" > config/prod.secret.exs - echo "import Mix.Config" > config/prod.secret.exs
- mix local.hex --force - mix local.hex --force
- mix local.rebar --force - mix local.rebar --force
@ -215,7 +217,7 @@ amd64-musl:
cache: *release-cache cache: *release-cache
variables: *release-variables variables: *release-variables
before_script: &before-release-musl before_script: &before-release-musl
- apk add git gcc g++ musl-dev make cmake - apk add git gcc g++ musl-dev make cmake file-dev
- echo "import Mix.Config" > config/prod.secret.exs - echo "import Mix.Config" > config/prod.secret.exs
- mix local.hex --force - mix local.hex --force
- mix local.rebar --force - mix local.rebar --force

85
CHANGELOG.md
View file

@ -5,14 +5,91 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
## Unreleased ## Unreleased
### Added
- Mix tasks for controlling user account confirmation status in bulk (`mix pleroma.user confirm_all` and `mix pleroma.user unconfirm_all`)
- Mix task for sending confirmation emails to all unconfirmed users (`mix pleroma.email send_confirmation_mails`)
- Mix task option for force-unfollowing relays
- Media preview proxy (requires `ffmpeg` and `ImageMagick` to be installed and media proxy to be enabled; see `:media_preview_proxy` config for more details).
- Pleroma API: Importing the mutes users from CSV files.
- Experimental websocket-based federation between Pleroma instances.
- Support pagination of blocks and mutes
- App metrics: ability to restrict access to specified IP whitelist.
- Account backup
- Configuration: Add `:instance, autofollowing_nicknames` setting to provide a way to make accounts automatically follow new users that register on the local Pleroma instance.
- Ability to view remote timelines, with ex. `/api/v1/timelines/public?instance=lain.com` and streams `public:remote` and `public:remote:media`
### Changed ### Changed
- **Breaking** Requires `libmagic` (or `file`) to guess file types.
- **Breaking:** Pleroma Admin API: emoji packs and files routes changed.
- **Breaking:** Sensitive/NSFW statuses no longer disable link previews.
- **Breaking:** App metrics endpoint (`/api/pleroma/app_metrics`) is disabled by default, check `docs/API/prometheus.md` on enabling and configuring.
- Search: Users are now findable by their urls.
- Renamed `:await_up_timeout` in `:connections_pool` namespace to `:connect_timeout`, old name is deprecated. - Renamed `:await_up_timeout` in `:connections_pool` namespace to `:connect_timeout`, old name is deprecated.
- Renamed `:timeout` in `pools` namespace to `:recv_timeout`, old name is deprecated. - Renamed `:timeout` in `pools` namespace to `:recv_timeout`, old name is deprecated.
- The `discoverable` field in the `User` struct will now add a NOINDEX metatag to profile pages when false.
- Users with the `discoverable` field set to false will not show up in searches.
- Minimum lifetime for ephmeral activities changed to 10 minutes and made configurable (`:min_lifetime` option).
- Introduced optional dependencies on `ffmpeg`, `ImageMagick`, `exiftool` software packages. Please refer to `docs/installation/optional/media_graphics_packages.md`.
- Polls now always return a `voters_count`, even if they are single-choice
<details>
<summary>API Changes</summary>
- Pleroma API: Importing the mutes users from CSV files.
- Admin API: Importing emoji from a zip file
- Pleroma API: Pagination for remote/local packs and emoji.
- Admin API: (`GET /api/pleroma/admin/users`) added filters user by `unconfirmed` status
- Admin API: (`GET /api/pleroma/admin/users`) added filters user by `actor_type`
- Pleroma API: Add `idempotency_key` to the chat message entity that can be used for optimistic message sending.
- Pleroma API: (`GET /api/v1/pleroma/federation_status`) Add a way to get a list of unreachable instances.
</details>
### Removed ### Removed
- **Breaking:** Removed `Pleroma.Workers.Cron.StatsWorker` setting from Oban `:crontab`. - **Breaking:** `Pleroma.Workers.Cron.StatsWorker` setting from Oban `:crontab` (moved to a simpler implementation).
- **Breaking:** `Pleroma.Workers.Cron.ClearOauthTokenWorker` setting from Oban `:crontab` (moved to scheduled jobs).
- **Breaking:** `Pleroma.Workers.Cron.PurgeExpiredActivitiesWorker` setting from Oban `:crontab` (moved to scheduled jobs).
- Removed `:managed_config` option. In practice, it was accidentally removed with 2.0.0 release when frontends were
switched to a new configuration mechanism, however it was not officially removed until now.
### Fixed
- Add documented-but-missing chat pagination.
- Allow sending out emails again.
- Allow sending chat messages to yourself.
- Fix remote users with a whitespace name.
- OStatus / static FE endpoints: fixed inaccessibility for anonymous users on non-federating instances, switched to handling per `:restrict_unauthenticated` setting.
- Mastodon API: Current user is now included in conversation if it's the only participant
- Mastodon API: Fixed last_status.account being not filled with account data
## Unreleased (Patch)
### Changed
- API: Empty parameter values for integer parameters are now ignored in non-strict validaton mode.
## [2.1.2] - 2020-09-17
### Security
- Fix most MRF rules either crashing or not being applied to objects passed into the Common Pipeline (ChatMessage, Question, Answer, Audio, Event).
### Fixed
- Welcome Chat messages preventing user registration with MRF Simple Policy applied to the local instance.
- Mastodon API: the public timeline returning an error when the `reply_visibility` parameter is set to `self` for an unauthenticated user.
- Mastodon Streaming API: Handler crashes on authentication failures, resulting in error logs.
- Mastodon Streaming API: Error logs on client pings.
- Rich media: Log spam on failures. Now the error is only logged once per attempt.
### Changed
- Rich Media: A HEAD request is now done to the url, to ensure it has the appropriate content type and size before proceeding with a GET.
### Upgrade notes
1. Restart Pleroma
## [2.1.1] - 2020-09-08 ## [2.1.1] - 2020-09-08
@ -29,6 +106,12 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/).
### Added ### Added
- Rich media failure tracking (along with `:failure_backoff` option). - Rich media failure tracking (along with `:failure_backoff` option).
<details>
<summary>Admin API Changes</summary>
- Add `PATCH /api/pleroma/admin/instance_document/:document_name` to modify the Terms of Service and Instance Panel HTML pages via Admin API
</details>
### Fixed ### Fixed
- Default HTTP adapter not respecting pool setting, leading to possible OOM. - Default HTTP adapter not respecting pool setting, leading to possible OOM.
- Fixed uploading webp images when the Exiftool Upload Filter is enabled by skipping them - Fixed uploading webp images when the Exiftool Upload Filter is enabled by skipping them

7
README.md
View file

@ -18,15 +18,16 @@ If you are running Linux (glibc or musl) on x86/arm, the recommended way to inst
### From Source ### From Source
If your platform is not supported, or you just want to be able to edit the source code easily, you may install Pleroma from source. If your platform is not supported, or you just want to be able to edit the source code easily, you may install Pleroma from source.
- [Debian-based](https://docs-develop.pleroma.social/backend/installation/debian_based_en/)
- [Debian-based (jp)](https://docs-develop.pleroma.social/backend/installation/debian_based_jp/)
- [Alpine Linux](https://docs-develop.pleroma.social/backend/installation/alpine_linux_en/) - [Alpine Linux](https://docs-develop.pleroma.social/backend/installation/alpine_linux_en/)
- [Arch Linux](https://docs-develop.pleroma.social/backend/installation/arch_linux_en/) - [Arch Linux](https://docs-develop.pleroma.social/backend/installation/arch_linux_en/)
- [CentOS 7](https://docs-develop.pleroma.social/backend/installation/centos7_en/)
- [Debian-based](https://docs-develop.pleroma.social/backend/installation/debian_based_en/)
- [Debian-based (jp)](https://docs-develop.pleroma.social/backend/installation/debian_based_jp/)
- [FreeBSD](https://docs-develop.pleroma.social/backend/installation/freebsd_en/)
- [Gentoo Linux](https://docs-develop.pleroma.social/backend/installation/gentoo_en/) - [Gentoo Linux](https://docs-develop.pleroma.social/backend/installation/gentoo_en/)
- [NetBSD](https://docs-develop.pleroma.social/backend/installation/netbsd_en/) - [NetBSD](https://docs-develop.pleroma.social/backend/installation/netbsd_en/)
- [OpenBSD](https://docs-develop.pleroma.social/backend/installation/openbsd_en/) - [OpenBSD](https://docs-develop.pleroma.social/backend/installation/openbsd_en/)
- [OpenBSD (fi)](https://docs-develop.pleroma.social/backend/installation/openbsd_fi/) - [OpenBSD (fi)](https://docs-develop.pleroma.social/backend/installation/openbsd_fi/)
- [CentOS 7](https://docs-develop.pleroma.social/backend/installation/centos7_en/)
### OS/Distro packages ### OS/Distro packages
Currently Pleroma is not packaged by any OS/Distros, but if you want to package it for one, we can guide you through the process on our [community channels](#community-channels). If you want to change default options in your Pleroma package, please **discuss it with us first**. Currently Pleroma is not packaged by any OS/Distros, but if you want to package it for one, we can guide you through the process on our [community channels](#community-channels). If you want to change default options in your Pleroma package, please **discuss it with us first**.

2
config/benchmark.exs
View file

@ -59,8 +59,6 @@
"BLH1qVhJItRGCfxgTtONfsOKDc9VRAraXw-3NsmjMngWSh7NxOizN6bkuRA7iLTMPS82PjwJAr3UoK9EC1IFrz4", "BLH1qVhJItRGCfxgTtONfsOKDc9VRAraXw-3NsmjMngWSh7NxOizN6bkuRA7iLTMPS82PjwJAr3UoK9EC1IFrz4",
private_key: "_-XZ0iebPrRfZ_o0-IatTdszYa8VCH1yLN-JauK7HHA" private_key: "_-XZ0iebPrRfZ_o0-IatTdszYa8VCH1yLN-JauK7HHA"
config :web_push_encryption, :http_client, Pleroma.Web.WebPushHttpClientMock
config :pleroma, Pleroma.ScheduledActivity, config :pleroma, Pleroma.ScheduledActivity,
daily_user_limit: 2, daily_user_limit: 2,
total_user_limit: 3, total_user_limit: 3,

66
config/config.exs
View file

@ -123,13 +123,13 @@
# Configures the endpoint # Configures the endpoint
config :pleroma, Pleroma.Web.Endpoint, config :pleroma, Pleroma.Web.Endpoint,
instrumenters: [Pleroma.Web.Endpoint.Instrumenter],
url: [host: "localhost"], url: [host: "localhost"],
http: [ http: [
ip: {127, 0, 0, 1}, ip: {127, 0, 0, 1},
dispatch: [ dispatch: [
{:_, {:_,
[ [
{"/api/fedsocket/v1", Pleroma.Web.FedSockets.IncomingHandler, []},
{"/api/v1/streaming", Pleroma.Web.MastodonAPI.WebsocketHandler, []}, {"/api/v1/streaming", Pleroma.Web.MastodonAPI.WebsocketHandler, []},
{"/websocket", Phoenix.Endpoint.CowboyWebSocket, {"/websocket", Phoenix.Endpoint.CowboyWebSocket,
{Phoenix.Transports.WebSocket, {Phoenix.Transports.WebSocket,
@ -142,12 +142,22 @@
secret_key_base: "aK4Abxf29xU9TTDKre9coZPUgevcVCFQJe/5xP/7Lt4BEif6idBIbjupVbOrbKxl", secret_key_base: "aK4Abxf29xU9TTDKre9coZPUgevcVCFQJe/5xP/7Lt4BEif6idBIbjupVbOrbKxl",
signing_salt: "CqaoopA2", signing_salt: "CqaoopA2",
render_errors: [view: Pleroma.Web.ErrorView, accepts: ~w(json)], render_errors: [view: Pleroma.Web.ErrorView, accepts: ~w(json)],
pubsub: [name: Pleroma.PubSub, adapter: Phoenix.PubSub.PG2], pubsub_server: Pleroma.PubSub,
secure_cookie_flag: true, secure_cookie_flag: true,
extra_cookie_attrs: [ extra_cookie_attrs: [
"SameSite=Lax" "SameSite=Lax"
] ]
config :pleroma, :fed_sockets,
enabled: false,
connection_duration: :timer.hours(8),
rejection_duration: :timer.minutes(15),
fed_socket_fetches: [
default: 12_000,
interval: 3_000,
lazy: false
]
# Configures Elixir's Logger # Configures Elixir's Logger
config :logger, :console, config :logger, :console,
level: :debug, level: :debug,
@ -216,7 +226,6 @@
allow_relay: true, allow_relay: true,
public: true, public: true,
quarantined_instances: [], quarantined_instances: [],
managed_config: true,
static_dir: "instance/static/", static_dir: "instance/static/",
allowed_post_formats: [ allowed_post_formats: [
"text/plain", "text/plain",
@ -225,6 +234,7 @@
"text/bbcode" "text/bbcode"
], ],
autofollowed_nicknames: [], autofollowed_nicknames: [],
autofollowing_nicknames: [],
max_pinned_statuses: 1, max_pinned_statuses: 1,
attachment_links: false, attachment_links: false,
max_report_comment_size: 1000, max_report_comment_size: 1000,
@ -424,6 +434,8 @@
proxy_opts: [ proxy_opts: [
redirect_on_failure: false, redirect_on_failure: false,
max_body_length: 25 * 1_048_576, max_body_length: 25 * 1_048_576,
# Note: max_read_duration defaults to Pleroma.ReverseProxy.max_read_duration_default/1
max_read_duration: 30_000,
http: [ http: [
follow_redirect: true, follow_redirect: true,
pool: :media pool: :media
@ -438,6 +450,14 @@
config :pleroma, Pleroma.Web.MediaProxy.Invalidation.Script, script_path: nil config :pleroma, Pleroma.Web.MediaProxy.Invalidation.Script, script_path: nil
# Note: media preview proxy depends on media proxy to be enabled
config :pleroma, :media_preview_proxy,
enabled: false,
thumbnail_max_width: 600,
thumbnail_max_height: 600,
image_quality: 85,
min_content_length: 100 * 1024
config :pleroma, :chat, enabled: true config :pleroma, :chat, enabled: true
config :phoenix, :format_encoders, json: Jason config :phoenix, :format_encoders, json: Jason
@ -530,8 +550,11 @@
log: false, log: false,
queues: [ queues: [
activity_expiration: 10, activity_expiration: 10,
token_expiration: 5,
backup: 1,
federator_incoming: 50, federator_incoming: 50,
federator_outgoing: 50, federator_outgoing: 50,
ingestion_queue: 50,
web_push: 50, web_push: 50,
mailer: 10, mailer: 10,
transmogrifier: 20, transmogrifier: 20,
@ -543,8 +566,6 @@
], ],
plugins: [Oban.Plugins.Pruner], plugins: [Oban.Plugins.Pruner],
crontab: [ crontab: [
{"0 0 * * *", Pleroma.Workers.Cron.ClearOauthTokenWorker},
{"* * * * *", Pleroma.Workers.Cron.PurgeExpiredActivitiesWorker},
{"0 0 * * 0", Pleroma.Workers.Cron.DigestEmailsWorker}, {"0 0 * * 0", Pleroma.Workers.Cron.DigestEmailsWorker},
{"0 0 * * *", Pleroma.Workers.Cron.NewUsersDigestWorker} {"0 0 * * *", Pleroma.Workers.Cron.NewUsersDigestWorker}
] ]
@ -616,7 +637,12 @@
config :pleroma, Pleroma.Emails.NewUsersDigestEmail, enabled: false config :pleroma, Pleroma.Emails.NewUsersDigestEmail, enabled: false
config :prometheus, Pleroma.Web.Endpoint.MetricsExporter, path: "/api/pleroma/app_metrics" config :prometheus, Pleroma.Web.Endpoint.MetricsExporter,
enabled: false,
auth: false,
ip_whitelist: [],
path: "/api/pleroma/app_metrics",
format: :text
config :pleroma, Pleroma.ScheduledActivity, config :pleroma, Pleroma.ScheduledActivity,
daily_user_limit: 25, daily_user_limit: 25,
@ -655,9 +681,20 @@
account_confirmation_resend: {8_640_000, 5}, account_confirmation_resend: {8_640_000, 5},
ap_routes: {60_000, 15} ap_routes: {60_000, 15}
config :pleroma, Pleroma.ActivityExpiration, enabled: true config :pleroma, Pleroma.Workers.PurgeExpiredActivity, enabled: true, min_lifetime: 600
config :pleroma, Pleroma.Plugs.RemoteIp, enabled: true config :pleroma, Pleroma.Web.Plugs.RemoteIp,
enabled: true,
headers: ["x-forwarded-for"],
proxies: [],
reserved: [
"127.0.0.0/8",
"::1/128",
"fc00::/7",
"10.0.0.0/8",
"172.16.0.0/12",
"192.168.0.0/16"
]
config :pleroma, :static_fe, enabled: false config :pleroma, :static_fe, enabled: false
@ -743,8 +780,8 @@
], ],
media: [ media: [
size: 50, size: 50,
max_waiting: 10, max_waiting: 20,
recv_timeout: 10_000 recv_timeout: 15_000
], ],
upload: [ upload: [
size: 25, size: 25,
@ -771,6 +808,8 @@
timeout: 300_000 timeout: 300_000
] ]
config :pleroma, :majic_pool, size: 2
private_instance? = :if_instance_is_private private_instance? = :if_instance_is_private
config :pleroma, :restrict_unauthenticated, config :pleroma, :restrict_unauthenticated,
@ -789,12 +828,19 @@
config :ex_aws, http_client: Pleroma.HTTP.ExAws config :ex_aws, http_client: Pleroma.HTTP.ExAws
config :web_push_encryption, http_client: Pleroma.HTTP.WebPush
config :pleroma, :instances_favicons, enabled: false config :pleroma, :instances_favicons, enabled: false
config :floki, :html_parser, Floki.HTMLParser.FastHtml config :floki, :html_parser, Floki.HTMLParser.FastHtml
config :pleroma, Pleroma.Web.Auth.Authenticator, Pleroma.Web.Auth.PleromaAuthenticator config :pleroma, Pleroma.Web.Auth.Authenticator, Pleroma.Web.Auth.PleromaAuthenticator
config :pleroma, Pleroma.User.Backup,
purge_after_days: 30,
limit_days: 7,
dir: nil
# Import environment specific config. This must remain at the bottom # Import environment specific config. This must remain at the bottom
# of this file so it overrides the configuration defined above. # of this file so it overrides the configuration defined above.
import_config "#{Mix.env()}.exs" import_config "#{Mix.env()}.exs"

217
config/description.exs
View file

@ -44,11 +44,13 @@
}, },
%{ %{
key: "git", key: "git",
label: "Git Repository URL",
type: :string, type: :string,
description: "URL of the git repository of the frontend" description: "URL of the git repository of the frontend"
}, },
%{ %{
key: "build_url", key: "build_url",
label: "Build URL",
type: :string, type: :string,
description: description:
"Either an url to a zip file containing the frontend or a template to build it by inserting the `ref`. The string `${ref}` will be replaced by the configured `ref`.", "Either an url to a zip file containing the frontend or a template to build it by inserting the `ref`. The string `${ref}` will be replaced by the configured `ref`.",
@ -56,6 +58,7 @@
}, },
%{ %{
key: "build_dir", key: "build_dir",
label: "Build directory",
type: :string, type: :string,
description: "The directory inside the zip file " description: "The directory inside the zip file "
} }
@ -270,6 +273,19 @@
} }
] ]
}, },
%{
group: :pleroma,
key: :fed_sockets,
type: :group,
description: "Websocket based federation",
children: [
%{
key: :enabled,
type: :boolean,
description: "Enable FedSockets"
}
]
},
%{ %{
group: :pleroma, group: :pleroma,
key: Pleroma.Emails.Mailer, key: Pleroma.Emails.Mailer,
@ -764,12 +780,6 @@
"*.quarantined.com" "*.quarantined.com"
] ]
}, },
%{
key: :managed_config,
type: :boolean,
description:
"Whenether the config for pleroma-fe is configured in this config or in static/config.json"
},
%{ %{
key: :static_dir, key: :static_dir,
type: :string, type: :string,
@ -819,13 +829,13 @@
key: :autofollowed_nicknames, key: :autofollowed_nicknames,
type: {:list, :string}, type: {:list, :string},
description: description:
"Set to nicknames of (local) users that every new user should automatically follow", "Set to nicknames of (local) users that every new user should automatically follow"
suggestions: [ },
"lain", %{
"kaniini", key: :autofollowing_nicknames,
"lanodan", type: {:list, :string},
"rinpatch" description:
] "Set to nicknames of (local) users that automatically follows every newly registered user"
}, },
%{ %{
key: :attachment_links, key: :attachment_links,
@ -1747,28 +1757,37 @@
related_policy: "Pleroma.Web.ActivityPub.MRF.KeywordPolicy", related_policy: "Pleroma.Web.ActivityPub.MRF.KeywordPolicy",
label: "MRF Keyword", label: "MRF Keyword",
type: :group, type: :group,
description: "Reject or Word-Replace messages with a keyword or regex", description:
"Reject or Word-Replace messages matching a keyword or [Regex](https://hexdocs.pm/elixir/Regex.html).",
children: [ children: [
%{ %{
key: :reject, key: :reject,
type: {:list, :string}, type: {:list, :string},
description: description: """
"A list of patterns which result in message being rejected. Each pattern can be a string or a regular expression.", A list of patterns which result in message being rejected.
Each pattern can be a string or [Regex](https://hexdocs.pm/elixir/Regex.html) in the format of `~r/PATTERN/`.
""",
suggestions: ["foo", ~r/foo/iu] suggestions: ["foo", ~r/foo/iu]
}, },
%{ %{
key: :federated_timeline_removal, key: :federated_timeline_removal,
type: {:list, :string}, type: {:list, :string},
description: description: """
"A list of patterns which result in message being removed from federated timelines (a.k.a unlisted). Each pattern can be a string or a regular expression.", A list of patterns which result in message being removed from federated timelines (a.k.a unlisted).
Each pattern can be a string or [Regex](https://hexdocs.pm/elixir/Regex.html) in the format of `~r/PATTERN/`.
""",
suggestions: ["foo", ~r/foo/iu] suggestions: ["foo", ~r/foo/iu]
}, },
%{ %{
key: :replace, key: :replace,
type: {:list, :tuple}, type: {:list, :tuple},
description: description: """
"A list of tuples containing {pattern, replacement}. Each pattern can be a string or a regular expression.", **Pattern**: a string or [Regex](https://hexdocs.pm/elixir/Regex.html) in the format of `~r/PATTERN/`.
suggestions: [{"foo", "bar"}, {~r/foo/iu, "bar"}]
**Replacement**: a string. Leaving the field empty is permitted.
"""
} }
] ]
}, },
@ -1880,6 +1899,7 @@
suggestions: [ suggestions: [
redirect_on_failure: false, redirect_on_failure: false,
max_body_length: 25 * 1_048_576, max_body_length: 25 * 1_048_576,
max_read_duration: 30_000,
http: [ http: [
follow_redirect: true, follow_redirect: true,
pool: :media pool: :media
@ -1900,6 +1920,11 @@
"Limits the content length to be approximately the " <> "Limits the content length to be approximately the " <>
"specified length. It is validated with the `content-length` header and also verified when proxying." "specified length. It is validated with the `content-length` header and also verified when proxying."
}, },
%{
key: :max_read_duration,
type: :integer,
description: "Timeout (in milliseconds) of GET request to remote URI."
},
%{ %{
key: :http, key: :http,
label: "HTTP", label: "HTTP",
@ -1946,6 +1971,43 @@
} }
] ]
}, },
%{
group: :pleroma,
key: :media_preview_proxy,
type: :group,
description: "Media preview proxy",
children: [
%{
key: :enabled,
type: :boolean,
description:
"Enables proxying of remote media preview to the instance's proxy. Requires enabled media proxy."
},
%{
key: :thumbnail_max_width,
type: :integer,
description:
"Max width of preview thumbnail for images (video preview always has original dimensions)."
},
%{
key: :thumbnail_max_height,
type: :integer,
description:
"Max height of preview thumbnail for images (video preview always has original dimensions)."
},
%{
key: :image_quality,
type: :integer,
description: "Quality of the output. Ranges from 0 (min quality) to 100 (max quality)."
},
%{
key: :min_content_length,
type: :integer,
description:
"Min content length to perform preview, in bytes. If greater than 0, media smaller in size will be served as is, without thumbnailing."
}
]
},
%{ %{
group: :pleroma, group: :pleroma,
key: Pleroma.Web.MediaProxy.Invalidation.Http, key: Pleroma.Web.MediaProxy.Invalidation.Http,
@ -2235,6 +2297,12 @@
description: "Activity expiration queue", description: "Activity expiration queue",
suggestions: [10] suggestions: [10]
}, },
%{
key: :backup,
type: :integer,
description: "Backup queue",
suggestions: [1]
},
%{ %{
key: :attachments_cleanup, key: :attachments_cleanup,
type: :integer, type: :integer,
@ -2290,8 +2358,6 @@
type: {:list, :tuple}, type: {:list, :tuple},
description: "Settings for cron background jobs", description: "Settings for cron background jobs",
suggestions: [ suggestions: [
{"0 0 * * *", Pleroma.Workers.Cron.ClearOauthTokenWorker},
{"* * * * *", Pleroma.Workers.Cron.PurgeExpiredActivitiesWorker},
{"0 0 * * 0", Pleroma.Workers.Cron.DigestEmailsWorker}, {"0 0 * * 0", Pleroma.Workers.Cron.DigestEmailsWorker},
{"0 0 * * *", Pleroma.Workers.Cron.NewUsersDigestWorker} {"0 0 * * *", Pleroma.Workers.Cron.NewUsersDigestWorker}
] ]
@ -2397,7 +2463,7 @@
%{ %{
group: :pleroma, group: :pleroma,
key: Pleroma.Formatter, key: Pleroma.Formatter,
label: "Auto Linker", label: "Linkify",
type: :group, type: :group,
description: description:
"Configuration for Pleroma's link formatter which parses mentions, hashtags, and URLs.", "Configuration for Pleroma's link formatter which parses mentions, hashtags, and URLs.",
@ -2474,14 +2540,20 @@
}, },
%{ %{
group: :pleroma, group: :pleroma,
key: Pleroma.ActivityExpiration, key: Pleroma.Workers.PurgeExpiredActivity,
type: :group, type: :group,
description: "Expired activity settings", description: "Expired activities settings",
children: [ children: [
%{ %{
key: :enabled, key: :enabled,
type: :boolean, type: :boolean,
description: "Whether expired activities will be sent to the job queue to be deleted" description: "Enables expired activities addition & deletion"
},
%{
key: :min_lifetime,
type: :integer,
description: "Minimum lifetime for ephemeral activity (in seconds)",
suggestions: [600]
} }
] ]
}, },
@ -3193,10 +3265,10 @@
}, },
%{ %{
group: :pleroma, group: :pleroma,
key: Pleroma.Plugs.RemoteIp, key: Pleroma.Web.Plugs.RemoteIp,
type: :group, type: :group,
description: """ description: """
`Pleroma.Plugs.RemoteIp` is a shim to call [`RemoteIp`](https://git.pleroma.social/pleroma/remote_ip) but with runtime configuration. `Pleroma.Web.Plugs.RemoteIp` is a shim to call [`RemoteIp`](https://git.pleroma.social/pleroma/remote_ip) but with runtime configuration.
**If your instance is not behind at least one reverse proxy, you should not enable this plug.** **If your instance is not behind at least one reverse proxy, you should not enable this plug.**
""", """,
children: [ children: [
@ -3208,20 +3280,22 @@
%{ %{
key: :headers, key: :headers,
type: {:list, :string}, type: {:list, :string},
description: description: """
"A list of strings naming the `req_headers` to use when deriving the `remote_ip`. Order does not matter. Default: `~w[forwarded x-forwarded-for x-client-ip x-real-ip]`." A list of strings naming the HTTP headers to use when deriving the true client IP. Default: `["x-forwarded-for"]`.
"""
}, },
%{ %{
key: :proxies, key: :proxies,
type: {:list, :string}, type: {:list, :string},
description: description:
"A list of strings in [CIDR](https://en.wikipedia.org/wiki/CIDR) notation specifying the IPs of known proxies. Default: `[]`." "A list of upstream proxy IP subnets in CIDR notation from which we will parse the content of `headers`. Defaults to `[]`. IPv4 entries without a bitmask will be assumed to be /32 and IPv6 /128."
}, },
%{ %{
key: :reserved, key: :reserved,
type: {:list, :string}, type: {:list, :string},
description: description: """
"Defaults to [localhost](https://en.wikipedia.org/wiki/Localhost) and [private network](https://en.wikipedia.org/wiki/Private_network)." A list of reserved IP subnets in CIDR notation which should be ignored if found in `headers`. Defaults to `["127.0.0.0/8", "::1/128", "fc00::/7", "10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]`
"""
} }
] ]
}, },
@ -3627,9 +3701,7 @@
type: :map, type: :map,
description: description:
"A map containing available frontends and parameters for their installation.", "A map containing available frontends and parameters for their installation.",
children: [ children: frontend_options
frontend_options
]
} }
] ]
}, },
@ -3651,5 +3723,76 @@
] ]
} }
] ]
},
%{
group: :pleroma,
key: :majic_pool,
type: :group,
description: "Majic/libmagic configuration",
children: [
%{
key: :size,
type: :integer,
description: "Number of majic workers to start.",
suggestions: [2]
}
]
},
%{
group: :pleroma,
key: Pleroma.User.Backup,
type: :group,
description: "Account Backup",
children: [
%{
key: :purge_after_days,
type: :integer,
description: "Remove backup achives after N days",
suggestions: [30]
},
%{
key: :limit_days,
type: :integer,
description: "Limit user to export not more often than once per N days",
suggestions: [7]
}
]
},
%{
group: :prometheus,
key: Pleroma.Web.Endpoint.MetricsExporter,
type: :group,
description: "Prometheus app metrics endpoint configuration",
children: [
%{
key: :enabled,
type: :boolean,
description: "[Pleroma extension] Enables app metrics endpoint."
},
%{
key: :ip_whitelist,
type: [{:list, :string}, {:list, :charlist}, {:list, :tuple}],
description:
"[Pleroma extension] If non-empty, restricts access to app metrics endpoint to specified IP addresses."
},
%{
key: :auth,
type: [:boolean, :tuple],
description: "Enables HTTP Basic Auth for app metrics endpoint.",
suggestion: [false, {:basic, "myusername", "mypassword"}]
},
%{
key: :path,
type: :string,
description: "App metrics endpoint URI path.",
suggestions: ["/api/pleroma/app_metrics"]
},
%{
key: :format,
type: :atom,
description: "App metrics endpoint output format.",
suggestions: [:text, :protobuf]
}
]
} }
] ]

9
config/test.exs
View file

@ -19,6 +19,11 @@
level: :warn, level: :warn,
format: "\n[$level] $message\n" format: "\n[$level] $message\n"
config :pleroma, :fed_sockets,
enabled: false,
connection_duration: 5,
rejection_duration: 5
config :pleroma, :auth, oauth_consumer_strategies: [] config :pleroma, :auth, oauth_consumer_strategies: []
config :pleroma, Pleroma.Upload, config :pleroma, Pleroma.Upload,
@ -78,8 +83,6 @@
"BLH1qVhJItRGCfxgTtONfsOKDc9VRAraXw-3NsmjMngWSh7NxOizN6bkuRA7iLTMPS82PjwJAr3UoK9EC1IFrz4", "BLH1qVhJItRGCfxgTtONfsOKDc9VRAraXw-3NsmjMngWSh7NxOizN6bkuRA7iLTMPS82PjwJAr3UoK9EC1IFrz4",
private_key: "_-XZ0iebPrRfZ_o0-IatTdszYa8VCH1yLN-JauK7HHA" private_key: "_-XZ0iebPrRfZ_o0-IatTdszYa8VCH1yLN-JauK7HHA"
config :web_push_encryption, :http_client, Pleroma.Web.WebPushHttpClientMock
config :pleroma, Oban, config :pleroma, Oban,
queues: false, queues: false,
crontab: false, crontab: false,
@ -110,7 +113,7 @@
config :pleroma, Pleroma.Emails.NewUsersDigestEmail, enabled: true config :pleroma, Pleroma.Emails.NewUsersDigestEmail, enabled: true
config :pleroma, Pleroma.Plugs.RemoteIp, enabled: false config :pleroma, Pleroma.Web.Plugs.RemoteIp, enabled: false
config :pleroma, Pleroma.Web.ApiSpec.CastAndValidate, strict: true config :pleroma, Pleroma.Web.ApiSpec.CastAndValidate, strict: true

3
coveralls.json
View file

@ -1,6 +1,7 @@
{ {
"skip_files": [ "skip_files": [
"test/support", "test/support",
"lib/mix/tasks/pleroma/benchmark.ex" "lib/mix/tasks/pleroma/benchmark.ex",
"lib/credo/check/consistency/file_location.ex"
] ]
} }

171
docs/API/admin_api.md
View file

@ -20,12 +20,14 @@ Configuration options:
- `external`: only external users - `external`: only external users
- `active`: only active users - `active`: only active users
- `need_approval`: only unapproved users - `need_approval`: only unapproved users
- `unconfirmed`: only unconfirmed users
- `deactivated`: only deactivated users - `deactivated`: only deactivated users
- `is_admin`: users with admin role - `is_admin`: users with admin role
- `is_moderator`: users with moderator role - `is_moderator`: users with moderator role
- *optional* `page`: **integer** page number - *optional* `page`: **integer** page number
- *optional* `page_size`: **integer** number of users per page (default is `50`) - *optional* `page_size`: **integer** number of users per page (default is `50`)
- *optional* `tags`: **[string]** tags list - *optional* `tags`: **[string]** tags list
- *optional* `actor_types`: **[string]** actor type list (`Person`, `Service`, `Application`)
- *optional* `name`: **string** user display name - *optional* `name`: **string** user display name
- *optional* `email`: **string** user email - *optional* `email`: **string** user email
- Example: `https://mypleroma.org/api/pleroma/admin/users?query=john&filters=local,active&page=1&page_size=10&tags[]=some_tag&tags[]=another_tag&name=display_name&email=email@example.com` - Example: `https://mypleroma.org/api/pleroma/admin/users?query=john&filters=local,active&page=1&page_size=10&tags[]=some_tag&tags[]=another_tag&name=display_name&email=email@example.com`
@ -349,9 +351,9 @@ Response:
### Unfollow a Relay ### Unfollow a Relay
Params: - Params:
- `relay_url`
* `relay_url` - *optional* `force`: forcefully unfollow a relay even when the relay is not available. (default is `false`)
Response: Response:
@ -1334,3 +1336,166 @@ Loads json generated from `config/descriptions.exs`.
{ } { }
``` ```
## GET /api/pleroma/admin/users/:nickname/chats
### List a user's chats
- Params: None
- Response:
```json
[
{
"sender": {
"id": "someflakeid",
"username": "somenick",
...
},
"receiver": {
"id": "someflakeid",
"username": "somenick",
...
},
"id" : "1",
"unread" : 2,
"last_message" : {...}, // The last message in that chat
"updated_at": "2020-04-21T15:11:46.000Z"
}
]
```
## GET /api/pleroma/admin/chats/:chat_id
### View a single chat
- Params: None
- Response:
```json
{
"sender": {
"id": "someflakeid",
"username": "somenick",
...
},
"receiver": {
"id": "someflakeid",
"username": "somenick",
...
},
"id" : "1",
"unread" : 2,
"last_message" : {...}, // The last message in that chat
"updated_at": "2020-04-21T15:11:46.000Z"
}
```
## GET /api/pleroma/admin/chats/:chat_id/messages
### List the messages in a chat
- Params: `max_id`, `min_id`
- Response:
```json
[
{
"account_id": "someflakeid",
"chat_id": "1",
"content": "Check this out :firefox:",
"created_at": "2020-04-21T15:11:46.000Z",
"emojis": [
{
"shortcode": "firefox",
"static_url": "https://dontbulling.me/emoji/Firefox.gif",
"url": "https://dontbulling.me/emoji/Firefox.gif",
"visible_in_picker": false
}
],
"id": "13",
"unread": true
},
{
"account_id": "someflakeid",
"chat_id": "1",
"content": "Whats' up?",
"created_at": "2020-04-21T15:06:45.000Z",
"emojis": [],
"id": "12",
"unread": false
}
]
```
## DELETE /api/pleroma/admin/chats/:chat_id/messages/:message_id
### Delete a single message
- Params: None
- Response:
```json
{
"account_id": "someflakeid",
"chat_id": "1",
"content": "Check this out :firefox:",
"created_at": "2020-04-21T15:11:46.000Z",
"emojis": [
{
"shortcode": "firefox",
"static_url": "https://dontbulling.me/emoji/Firefox.gif",
"url": "https://dontbulling.me/emoji/Firefox.gif",
"visible_in_picker": false
}
],
"id": "13",
"unread": false
}
```
## `GET /api/pleroma/admin/instance_document/:document_name`
### Get an instance document
- Authentication: required
- Response:
Returns the content of the document
```html
<h1>Instance panel</h1>
```
## `PATCH /api/pleroma/admin/instance_document/:document_name`
- Params:
- `file` (the file to be uploaded, using multipart form data.)
### Update an instance document
- Authentication: required
- Response:
``` json
{
"url": "https://example.com/instance/panel.html"
}
```
## `DELETE /api/pleroma/admin/instance_document/:document_name`
### Delete an instance document
- Response:
``` json
{
"url": "https://example.com/instance/panel.html"
}
```

9
docs/API/chats.md
View file

@ -116,6 +116,10 @@ The modified chat message
This will return a list of chats that you have been involved in, sorted by their This will return a list of chats that you have been involved in, sorted by their
last update (so new chats will be at the top). last update (so new chats will be at the top).
Parameters:
- with_muted: Include chats from muted users (boolean).
Returned data: Returned data:
```json ```json
@ -173,11 +177,14 @@ Returned data:
"created_at": "2020-04-21T15:06:45.000Z", "created_at": "2020-04-21T15:06:45.000Z",
"emojis": [], "emojis": [],
"id": "12", "id": "12",
"unread": false "unread": false,
"idempotency_key": "75442486-0874-440c-9db1-a7006c25a31f"
} }
] ]
``` ```
- idempotency_key: The copy of the `idempotency-key` HTTP request header that can be used for optimistic message sending. Included only during the first few minutes after the message creation.
### Posting a chat message ### Posting a chat message
Posting a chat message for given Chat id works like this: Posting a chat message for given Chat id works like this:

6
docs/API/differences_in_mastoapi_responses.md
View file

@ -9,9 +9,13 @@ Pleroma uses 128-bit ids as opposed to Mastodon's 64 bits. However just like Mas
## Timelines ## Timelines
Adding the parameter `with_muted=true` to the timeline queries will also return activities by muted (not by blocked!) users. Adding the parameter `with_muted=true` to the timeline queries will also return activities by muted (not by blocked!) users.
Adding the parameter `exclude_visibilities` to the timeline queries will exclude the statuses with the given visibilities. The parameter accepts an array of visibility types (`public`, `unlisted`, `private`, `direct`), e.g., `exclude_visibilities[]=direct&exclude_visibilities[]=private`. Adding the parameter `exclude_visibilities` to the timeline queries will exclude the statuses with the given visibilities. The parameter accepts an array of visibility types (`public`, `unlisted`, `private`, `direct`), e.g., `exclude_visibilities[]=direct&exclude_visibilities[]=private`.
Adding the parameter `reply_visibility` to the public and home timelines queries will filter replies. Possible values: without parameter (default) shows all replies, `following` - replies directed to you or users you follow, `self` - replies directed to you. Adding the parameter `reply_visibility` to the public and home timelines queries will filter replies. Possible values: without parameter (default) shows all replies, `following` - replies directed to you or users you follow, `self` - replies directed to you.
Adding the parameter `instance=lain.com` to the public timeline will show only statuses originating from `lain.com` (or any remote instance).
## Statuses ## Statuses
- `visibility`: has an additional possible value `list` - `visibility`: has an additional possible value `list`
@ -249,6 +253,8 @@ Has these additional fields under the `pleroma` object:
There is an additional `user:pleroma_chat` stream. Incoming chat messages will make the current chat be sent to this `user` stream. The `event` of an incoming chat message is `pleroma:chat_update`. The payload is the updated chat with the incoming chat message in the `last_message` field. There is an additional `user:pleroma_chat` stream. Incoming chat messages will make the current chat be sent to this `user` stream. The `event` of an incoming chat message is `pleroma:chat_update`. The payload is the updated chat with the incoming chat message in the `last_message` field.
For viewing remote server timelines, there are `public:remote` and `public:remote:media` streams. Each of these accept a parameter like `?instance=lain.com`.
## Not implemented ## Not implemented
Pleroma is generally compatible with the Mastodon 2.7.2 API, but some newer features and non-essential features are omitted. These features usually return an HTTP 200 status code, but with an empty response. While they may be added in the future, they are considered low priority. Pleroma is generally compatible with the Mastodon 2.7.2 API, but some newer features and non-essential features are omitted. These features usually return an HTTP 200 status code, but with an empty response. While they may be added in the future, they are considered low priority.

197
docs/API/pleroma_api.md
View file

@ -44,6 +44,22 @@ Request parameters can be passed via [query strings](https://en.wikipedia.org/wi
* Response: HTTP 200 on success, 500 on error * Response: HTTP 200 on success, 500 on error
* Note: Users that can't be followed are silently skipped. * Note: Users that can't be followed are silently skipped.
## `/api/pleroma/blocks_import`
### Imports your blocks.
* Method: `POST`
* Authentication: required
* Params:
* `list`: STRING or FILE containing a whitespace-separated list of accounts to block
* Response: HTTP 200 on success, 500 on error
## `/api/pleroma/mutes_import`
### Imports your mutes.
* Method: `POST`
* Authentication: required
* Params:
* `list`: STRING or FILE containing a whitespace-separated list of accounts to mute
* Response: HTTP 200 on success, 500 on error
## `/api/pleroma/captcha` ## `/api/pleroma/captcha`
### Get a new captcha ### Get a new captcha
* Method: `GET` * Method: `GET`
@ -362,44 +378,43 @@ The status posting endpoint takes an additional parameter, `in_reply_to_conversa
* Params: None * Params: None
* Response: JSON, returns a list of Mastodon Conversation entities that were marked as read (200 - healthy, 503 unhealthy). * Response: JSON, returns a list of Mastodon Conversation entities that were marked as read (200 - healthy, 503 unhealthy).
## `GET /api/pleroma/emoji/packs/import` ## `GET /api/pleroma/emoji/pack?name=:name`
### Imports packs from filesystem
### Get pack.json for the pack
* Method `GET` * Method `GET`
* Authentication: required * Authentication: not required
* Params: None
* Response: JSON, returns a list of imported packs.
## `GET /api/pleroma/emoji/packs/remote`
### Make request to another instance for packs list
* Method `GET`
* Authentication: required
* Params: * Params:
* `url`: url of the instance to get packs from * `page`: page number for files (default 1)
* Response: JSON with the pack list, hashmap with pack name and pack contents * `page_size`: page size for files (default 30)
* Response: JSON, pack json with `files`, `files_count` and `pack` keys with 200 status or 404 if the pack does not exist.
## `POST /api/pleroma/emoji/packs/download` ```json
### Download pack from another instance {
* Method `POST` "files": {...},
* Authentication: required "files_count": 0, // emoji count in pack
* Params: "pack": {...}
* `url`: url of the instance to download from }
* `name`: pack to download from that instance ```
* `as`: (*optional*) name how to save pack
* Response: JSON, "ok" with 200 status if the pack was downloaded, or 500 if there were ## `POST /api/pleroma/emoji/pack?name=:name`
errors downloading the pack
## `POST /api/pleroma/emoji/packs/:name`
### Creates an empty pack ### Creates an empty pack
* Method `POST` * Method `POST`
* Authentication: required * Authentication: required (admin)
* Params: None * Params:
* `name`: pack name
* Response: JSON, "ok" and 200 status or 409 if the pack with that name already exists * Response: JSON, "ok" and 200 status or 409 if the pack with that name already exists
## `PATCH /api/pleroma/emoji/packs/:name` ## `PATCH /api/pleroma/emoji/pack?name=:name`
### Updates (replaces) pack metadata ### Updates (replaces) pack metadata
* Method `PATCH` * Method `PATCH`
* Authentication: required * Authentication: required (admin)
* Params: * Params:
* `name`: pack name
* `metadata`: metadata to replace the old one * `metadata`: metadata to replace the old one
* `license`: Pack license * `license`: Pack license
* `homepage`: Pack home page url * `homepage`: Pack home page url
@ -410,39 +425,85 @@ The status posting endpoint takes an additional parameter, `in_reply_to_conversa
* Response: JSON, updated "metadata" section of the pack and 200 status or 400 if there was a * Response: JSON, updated "metadata" section of the pack and 200 status or 400 if there was a
problem with the new metadata (the error is specified in the "error" part of the response JSON) problem with the new metadata (the error is specified in the "error" part of the response JSON)
## `DELETE /api/pleroma/emoji/packs/:name` ## `DELETE /api/pleroma/emoji/pack?name=:name`
### Delete a custom emoji pack ### Delete a custom emoji pack
* Method `DELETE` * Method `DELETE`
* Authentication: required * Authentication: required (admin)
* Params: None * Params:
* `name`: pack name
* Response: JSON, "ok" and 200 status or 500 if there was an error deleting the pack * Response: JSON, "ok" and 200 status or 500 if there was an error deleting the pack
## `POST /api/pleroma/emoji/packs/:name/files` ## `GET /api/pleroma/emoji/packs/import`
### Add new file to the pack
* Method `POST` ### Imports packs from filesystem
* Authentication: required
* Method `GET`
* Authentication: required (admin)
* Params: None
* Response: JSON, returns a list of imported packs.
## `GET /api/pleroma/emoji/packs/remote`
### Make request to another instance for packs list
* Method `GET`
* Authentication: required (admin)
* Params: * Params:
* `url`: url of the instance to get packs from
* `page`: page number for packs (default 1)
* `page_size`: page size for packs (default 50)
* Response: JSON with the pack list, hashmap with pack name and pack contents
## `POST /api/pleroma/emoji/packs/download`
### Download pack from another instance
* Method `POST`
* Authentication: required (admin)
* Params:
* `url`: url of the instance to download from
* `name`: pack to download from that instance
* `as`: (*optional*) name how to save pack
* Response: JSON, "ok" with 200 status if the pack was downloaded, or 500 if there were
errors downloading the pack
## `POST /api/pleroma/emoji/packs/files?name=:name`
### Add new file to the pack
* Method `POST`
* Authentication: required (admin)
* Params:
* `name`: pack name
* `file`: file needs to be uploaded with the multipart request or link to remote file. * `file`: file needs to be uploaded with the multipart request or link to remote file.
* `shortcode`: (*optional*) shortcode for new emoji, must be unique for all emoji. If not sended, shortcode will be taken from original filename. * `shortcode`: (*optional*) shortcode for new emoji, must be unique for all emoji. If not sended, shortcode will be taken from original filename.
* `filename`: (*optional*) new emoji file name. If not specified will be taken from original filename. * `filename`: (*optional*) new emoji file name. If not specified will be taken from original filename.
* Response: JSON, list of files for updated pack (hashmap -> shortcode => filename) with status 200, either error status with error message. * Response: JSON, list of files for updated pack (hashmap -> shortcode => filename) with status 200, either error status with error message.
## `PATCH /api/pleroma/emoji/packs/:name/files` ## `PATCH /api/pleroma/emoji/packs/files?name=:name`
### Update emoji file from pack ### Update emoji file from pack
* Method `PATCH` * Method `PATCH`
* Authentication: required * Authentication: required (admin)
* Params: * Params:
* `name`: pack name
* `shortcode`: emoji file shortcode * `shortcode`: emoji file shortcode
* `new_shortcode`: new emoji file shortcode * `new_shortcode`: new emoji file shortcode
* `new_filename`: new filename for emoji file * `new_filename`: new filename for emoji file
* `force`: (*optional*) with true value to overwrite existing emoji with new shortcode * `force`: (*optional*) with true value to overwrite existing emoji with new shortcode
* Response: JSON, list with updated files for updated pack (hashmap -> shortcode => filename) with status 200, either error status with error message. * Response: JSON, list with updated files for updated pack (hashmap -> shortcode => filename) with status 200, either error status with error message.
## `DELETE /api/pleroma/emoji/packs/:name/files` ## `DELETE /api/pleroma/emoji/packs/files?name=:name`
### Delete emoji file from pack ### Delete emoji file from pack
* Method `DELETE` * Method `DELETE`
* Authentication: required * Authentication: required (admin)
* Params: * Params:
* `name`: pack name
* `shortcode`: emoji file shortcode * `shortcode`: emoji file shortcode
* Response: JSON, list with updated files for updated pack (hashmap -> shortcode => filename) with status 200, either error status with error message. * Response: JSON, list with updated files for updated pack (hashmap -> shortcode => filename) with status 200, either error status with error message.
@ -467,30 +528,14 @@ The status posting endpoint takes an additional parameter, `in_reply_to_conversa
} }
``` ```
## `GET /api/pleroma/emoji/packs/:name` ## `GET /api/pleroma/emoji/packs/archive?name=:name`
### Get pack.json for the pack ### Requests a local pack archive from the instance
* Method `GET` * Method `GET`
* Authentication: not required * Authentication: not required
* Params: * Params:
* `page`: page number for files (default 1) * `name`: pack name
* `page_size`: page size for files (default 30)
* Response: JSON, pack json with `files`, `files_count` and `pack` keys with 200 status or 404 if the pack does not exist.
```json
{
"files": {...},
"files_count": 0, // emoji count in pack
"pack": {...}
}
```
## `GET /api/pleroma/emoji/packs/:name/archive`
### Requests a local pack archive from the instance
* Method `GET`
* Authentication: not required
* Params: None
* Response: the archive of the pack with a 200 status code, 403 if the pack is not set as shared, * Response: the archive of the pack with a 200 status code, 403 if the pack is not set as shared,
404 if the pack does not exist 404 if the pack does not exist
@ -570,3 +615,41 @@ Emoji reactions work a lot like favourites do. They make it possible to react to
{"name": "😀", "count": 2, "me": true, "accounts": [{"id" => "xyz.."...}, {"id" => "zyx..."}]} {"name": "😀", "count": 2, "me": true, "accounts": [{"id" => "xyz.."...}, {"id" => "zyx..."}]}
] ]
``` ```
## `POST /api/v1/pleroma/backups`
### Create a user backup archive
* Method: `POST`
* Authentication: required
* Params: none
* Response: JSON
* Example response:
```json
[{
"content_type": "application/zip",
"file_size": 0,
"inserted_at": "2020-09-10T16:18:03.000Z",
"processed": false,
"url": "https://example.com/media/backups/archive-foobar-20200910T161803-QUhx6VYDRQ2wfV0SdA2Pfj_2CLM_ATUlw-D5l5TJf4Q.zip"
}]
```
## `GET /api/v1/pleroma/backups`
### Lists user backups
* Method: `GET`
* Authentication: not required
* Params: none
* Response: JSON
* Example response:
```json
[{
"content_type": "application/zip",
"file_size": 55457,
"inserted_at": "2020-09-10T16:18:03.000Z",
"processed": true,
"url": "https://example.com/media/backups/archive-foobar-20200910T161803-QUhx6VYDRQ2wfV0SdA2Pfj_2CLM_ATUlw-D5l5TJf4Q.zip"
}]
```

26
docs/API/prometheus.md
View file

@ -2,15 +2,37 @@
Pleroma includes support for exporting metrics via the [prometheus_ex](https://github.com/deadtrickster/prometheus.ex) library. Pleroma includes support for exporting metrics via the [prometheus_ex](https://github.com/deadtrickster/prometheus.ex) library.
Config example:
```
config :prometheus, Pleroma.Web.Endpoint.MetricsExporter,
enabled: true,
auth: {:basic, "myusername", "mypassword"},
ip_whitelist: ["127.0.0.1"],
path: "/api/pleroma/app_metrics",
format: :text
```
* `enabled` (Pleroma extension) enables the endpoint
* `ip_whitelist` (Pleroma extension) could be used to restrict access only to specified IPs
* `auth` sets the authentication (`false` for no auth; configurable to HTTP Basic Auth, see [prometheus-plugs](https://github.com/deadtrickster/prometheus-plugs#exporting) documentation)
* `format` sets the output format (`:text` or `:protobuf`)
* `path` sets the path to app metrics page
## `/api/pleroma/app_metrics` ## `/api/pleroma/app_metrics`
### Exports Prometheus application metrics ### Exports Prometheus application metrics
* Method: `GET` * Method: `GET`
* Authentication: not required * Authentication: not required by default (see configuration options above)
* Params: none * Params: none
* Response: JSON * Response: text
## Grafana ## Grafana
### Config example ### Config example
The following is a config example to use with [Grafana](https://grafana.com) The following is a config example to use with [Grafana](https://grafana.com)
``` ```

16
docs/administration/CLI_tasks/email.md
View file

@ -1,4 +1,4 @@
# Managing emails # EMail administration tasks
{! backend/administration/CLI_tasks/general_cli_task_info.include !} {! backend/administration/CLI_tasks/general_cli_task_info.include !}
@ -30,3 +30,17 @@ Example:
```sh ```sh
mix pleroma.email test --to root@example.org mix pleroma.email test --to root@example.org
``` ```
## Send confirmation emails to all unconfirmed user accounts
=== "OTP"
```sh
./bin/pleroma_ctl email send_confirmation_mails
```
=== "From Source"
```sh
mix pleroma.email send_confirmation_mails
```

61
docs/administration/CLI_tasks/frontend.md
View file

@ -1,12 +1,23 @@
# Managing frontends # Managing frontends
`mix pleroma.frontend install <frontend> [--ref <ref>] [--file <file>] [--build-url <build-url>] [--path <path>] [--build-dir <build-dir>]` === "OTP"
```sh
./bin/pleroma_ctl frontend install <frontend> [--ref <ref>] [--file <file>] [--build-url <build-url>] [--path <path>] [--build-dir <build-dir>]
```
=== "From Source"
```sh
mix pleroma.frontend install <frontend> [--ref <ref>] [--file <file>] [--build-url <build-url>] [--path <path>] [--build-dir <build-dir>]
```
Frontend can be installed either from local zip file, or automatically downloaded from the web. Frontend can be installed either from local zip file, or automatically downloaded from the web.
You can give all the options directly on the command like, but missing information will be filled out by looking at the data configured under `frontends.available` in the config files. You can give all the options directly on the command line, but missing information will be filled out by looking at the data configured under `frontends.available` in the config files.
Currently, known `<frontend>` values are:
Currently known `<frontend>` values are:
- [admin-fe](https://git.pleroma.social/pleroma/admin-fe) - [admin-fe](https://git.pleroma.social/pleroma/admin-fe)
- [kenoma](http://git.pleroma.social/lambadalambda/kenoma) - [kenoma](http://git.pleroma.social/lambadalambda/kenoma)
- [pleroma-fe](http://git.pleroma.social/pleroma/pleroma-fe) - [pleroma-fe](http://git.pleroma.social/pleroma/pleroma-fe)
@ -19,51 +30,67 @@ You can still install frontends that are not configured, see below.
For a frontend configured under the `available` key, it's enough to install it by name. For a frontend configured under the `available` key, it's enough to install it by name.
```sh tab="OTP" === "OTP"
```sh
./bin/pleroma_ctl frontend install pleroma ./bin/pleroma_ctl frontend install pleroma
``` ```
```sh tab="From Source" === "From Source"
```sh
mix pleroma.frontend install pleroma mix pleroma.frontend install pleroma
``` ```
This will download the latest build for the the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`). This will download the latest build for the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`).
You can override any of the details. To install a pleroma build from a different url, you could do this: You can override any of the details. To install a pleroma build from a different URL, you could do this:
```sh tab="OPT" === "OTP"
```sh
./bin/pleroma_ctl frontend install pleroma --ref 2hu_edition --build-url https://example.org/raymoo.zip ./bin/pleroma_ctl frontend install pleroma --ref 2hu_edition --build-url https://example.org/raymoo.zip
``` ```
```sh tab="From Source" === "From Source"
```sh
mix pleroma.frontend install pleroma --ref 2hu_edition --build-url https://example.org/raymoo.zip mix pleroma.frontend install pleroma --ref 2hu_edition --build-url https://example.org/raymoo.zip
``` ```
Similarly, you can also install from a local zip file. Similarly, you can also install from a local zip file.
```sh tab="OTP" === "OTP"
```sh
./bin/pleroma_ctl frontend install pleroma --ref mybuild --file ~/Downloads/doomfe.zip ./bin/pleroma_ctl frontend install pleroma --ref mybuild --file ~/Downloads/doomfe.zip
``` ```
```sh tab="From Source" === "From Source"
```sh
mix pleroma.frontend install pleroma --ref mybuild --file ~/Downloads/doomfe.zip mix pleroma.frontend install pleroma --ref mybuild --file ~/Downloads/doomfe.zip
``` ```
The resulting frontend will always be installed into a folder of this template: `${instance_static}/frontends/${name}/${ref}` The resulting frontend will always be installed into a folder of this template: `${instance_static}/frontends/${name}/${ref}`.
Careful: This folder will be completely replaced on installation Careful: This folder will be completely replaced on installation.
## Example installation for an unknown frontend ## Example installation for an unknown frontend
The installation process is the same, but you will have to give all the needed options on the commond line. For example: The installation process is the same, but you will have to give all the needed options on the command line. For example:
```sh tab="OTP" === "OTP"
```sh
./bin/pleroma_ctl frontend install gensokyo --ref master --build-url https://gensokyo.2hu/builds/marisa.zip ./bin/pleroma_ctl frontend install gensokyo --ref master --build-url https://gensokyo.2hu/builds/marisa.zip
``` ```
```sh tab="From Source" === "From Source"
```sh
mix pleroma.frontend install gensokyo --ref master --build-url https://gensokyo.2hu/builds/marisa.zip mix pleroma.frontend install gensokyo --ref master --build-url https://gensokyo.2hu/builds/marisa.zip
``` ```
If you don't have a zip file but just want to install a frontend from a local path, you can simply copy the files over a folder of this template: `${instance_static}/frontends/${name}/${ref}` If you don't have a zip file but just want to install a frontend from a local path, you can simply copy the files over a folder of this template: `${instance_static}/frontends/${name}/${ref}`.

5
docs/administration/CLI_tasks/instance.md
View file

@ -37,3 +37,8 @@ If any of the options are left unspecified, you will be prompted interactively.
- `--static-dir <path>` - the directory custom public files should be read from (custom emojis, frontend bundle overrides, robots.txt, etc.) - `--static-dir <path>` - the directory custom public files should be read from (custom emojis, frontend bundle overrides, robots.txt, etc.)
- `--listen-ip <ip>` - the ip the app should listen to, defaults to 127.0.0.1 - `--listen-ip <ip>` - the ip the app should listen to, defaults to 127.0.0.1
- `--listen-port <port>` - the port the app should listen to, defaults to 4000 - `--listen-port <port>` - the port the app should listen to, defaults to 4000
- `--strip-uploads <Y|N>` - use ExifTool to strip uploads of sensitive location data
- `--anonymize-uploads <Y|N>` - randomize uploaded filenames
- `--dedupe-uploads <Y|N>` - store files based on their hash to reduce data storage requirements if duplicates are uploaded with different filenames
- `--skip-release-env` - skip generation the release environment file
- `--release-env-file` - release environment file path

9
docs/administration/CLI_tasks/release_environments.md Normal file
View file

@ -0,0 +1,9 @@
# Generate release environment file
```sh tab="OTP"
./bin/pleroma_ctl release_env gen
```
```sh tab="From Source"
mix pleroma.release_env gen
```

33
docs/administration/CLI_tasks/user.md
View file

@ -224,9 +224,10 @@
``` ```
### Options ### Options
- `--admin`/`--no-admin` - whether the user should be an admin
- `--confirmed`/`--no-confirmed` - whether the user account is confirmed
- `--locked`/`--no-locked` - whether the user should be locked - `--locked`/`--no-locked` - whether the user should be locked
- `--moderator`/`--no-moderator` - whether the user should be a moderator - `--moderator`/`--no-moderator` - whether the user should be a moderator
- `--admin`/`--no-admin` - whether the user should be an admin
## Add tags to a user ## Add tags to a user
@ -271,3 +272,33 @@
```sh ```sh
mix pleroma.user toggle_confirmed <nickname> mix pleroma.user toggle_confirmed <nickname>
``` ```
## Set confirmation status for all regular active users
*Admins and moderators are excluded*
=== "OTP"
```sh
./bin/pleroma_ctl user confirm_all
```
=== "From Source"
```sh
mix pleroma.user confirm_all
```
## Revoke confirmation status for all regular active users
*Admins and moderators are excluded*
=== "OTP"
```sh
./bin/pleroma_ctl user unconfirm_all
```
=== "From Source"
```sh
mix pleroma.user unconfirm_all
```

21
docs/administration/backup.md
View file

@ -5,20 +5,25 @@
1. Stop the Pleroma service. 1. Stop the Pleroma service.
2. Go to the working directory of Pleroma (default is `/opt/pleroma`) 2. Go to the working directory of Pleroma (default is `/opt/pleroma`)
3. Run `sudo -Hu postgres pg_dump -d <pleroma_db> --format=custom -f </path/to/backup_location/pleroma.pgdump>` (make sure the postgres user has write access to the destination file) 3. Run `sudo -Hu postgres pg_dump -d <pleroma_db> --format=custom -f </path/to/backup_location/pleroma.pgdump>` (make sure the postgres user has write access to the destination file)
4. Copy `pleroma.pgdump`, `config/prod.secret.exs` and the `uploads` folder to your backup destination. If you have other modifications, copy those changes too. 4. Copy `pleroma.pgdump`, `config/prod.secret.exs`, `config/setup_db.psql` (if still available) and the `uploads` folder to your backup destination. If you have other modifications, copy those changes too.
5. Restart the Pleroma service. 5. Restart the Pleroma service.
## Restore/Move ## Restore/Move
1. Optionally reinstall Pleroma (either on the same server or on another server if you want to move servers). Try to use the same database name. 1. Optionally reinstall Pleroma (either on the same server or on another server if you want to move servers).
2. Stop the Pleroma service. 2. Stop the Pleroma service.
3. Go to the working directory of Pleroma (default is `/opt/pleroma`) 3. Go to the working directory of Pleroma (default is `/opt/pleroma`)
4. Copy the above mentioned files back to their original position. 4. Copy the above mentioned files back to their original position.
5. Drop the existing database and recreate an empty one `sudo -Hu postgres psql -c 'DROP DATABASE <pleroma_db>;';` `sudo -Hu postgres psql -c 'CREATE DATABASE <pleroma_db>;';` 5. Drop the existing database and user if restoring in-place. `sudo -Hu postgres psql -c 'DROP DATABASE <pleroma_db>;';` `sudo -Hu postgres psql -c 'DROP USER <pleroma_db>;'`
6. Run `sudo -Hu postgres pg_restore -d <pleroma_db> -v -1 </path/to/backup_location/pleroma.pgdump>` 6. Restore the database schema and pleroma postgres role the with the original `setup_db.psql` if you have it: `sudo -Hu postgres psql -f config/setup_db.psql`.
7. If you installed a newer Pleroma version, you should run `mix ecto.migrate`[^1]. This task performs database migrations, if there were any.
8. Restart the Pleroma service. Alternatively, run the `mix pleroma.instance gen` task again. You can ignore most of the questions, but make the database user, name, and password the same as found in your backup of `config/prod.secret.exs`. Then run the restoration of the pleroma role and schema with of the generated `config/setup_db.psql` as instructed above. You may delete the `config/generated_config.exs` file as it is not needed.
9. Run `sudo -Hu postgres vacuumdb --all --analyze-in-stages`. This will quickly generate the statistics so that postgres can properly plan queries.
7. Now restore the Pleroma instance's data into the empty database schema: `sudo -Hu postgres pg_restore -d <pleroma_db> -v -1 </path/to/backup_location/pleroma.pgdump>`
8. If you installed a newer Pleroma version, you should run `mix ecto.migrate`[^1]. This task performs database migrations, if there were any.
9. Restart the Pleroma service.
10. Run `sudo -Hu postgres vacuumdb --all --analyze-in-stages`. This will quickly generate the statistics so that postgres can properly plan queries.
11. If setting up on a new server configure Nginx by using the `installation/pleroma.nginx` config sample or reference the Pleroma installation guide for your OS which contains the Nginx configuration instructions.
[^1]: Prefix with `MIX_ENV=prod` to run it using the production config file. [^1]: Prefix with `MIX_ENV=prod` to run it using the production config file.
@ -31,6 +36,6 @@
3. Disable pleroma from systemd `systemctl disable pleroma` 3. Disable pleroma from systemd `systemctl disable pleroma`
4. Remove the files and folders you created during installation (see installation guide). This includes the pleroma, nginx and systemd files and folders. 4. Remove the files and folders you created during installation (see installation guide). This includes the pleroma, nginx and systemd files and folders.
5. Reload nginx now that the configuration is removed `systemctl reload nginx` 5. Reload nginx now that the configuration is removed `systemctl reload nginx`
6. Remove the database and database user `sudo -Hu postgres psql -c 'DROP DATABASE <pleroma_db>;';` `sudo -Hu postgres psql -c 'DROP USER <pleroma_db>;';` 6. Remove the database and database user `sudo -Hu postgres psql -c 'DROP DATABASE <pleroma_db>;';` `sudo -Hu postgres psql -c 'DROP USER <pleroma_db>;'`
7. Remove the system user `userdel pleroma` 7. Remove the system user `userdel pleroma`
8. Remove the dependencies that you don't need anymore (see installation guide). Make sure you don't remove packages that are still needed for other software that you have running! 8. Remove the dependencies that you don't need anymore (see installation guide). Make sure you don't remove packages that are still needed for other software that you have running!

34
docs/ap_extensions.md
View file

@ -1,11 +1,41 @@
# ChatMessages # AP Extensions
## Actor endpoints
ChatMessages are the messages sent in 1-on-1 chats. They are similar to The following endpoints are additionally present into our actors.
- `oauthRegistrationEndpoint` (`http://litepub.social/ns#oauthRegistrationEndpoint`)
- `uploadMedia` (`https://www.w3.org/ns/activitystreams#uploadMedia`)
### oauthRegistrationEndpoint
Points to MastodonAPI `/api/v1/apps` for now.
See <https://docs.joinmastodon.org/methods/apps/>
### uploadMedia
Inspired by <https://www.w3.org/wiki/SocialCG/ActivityPub/MediaUpload>, it is part of the ActivityStreams namespace because it used to be part of the ActivityPub specification and got removed from it.
Content-Type: multipart/form-data
Parameters:
- (required) `file`: The file being uploaded
- (optionnal) `description`: A plain-text description of the media, for accessibility purposes.
Response: HTTP 201 Created with the object into the body, no `Location` header provided as it doesn't have an `id`
The object given in the reponse should then be inserted into an Object's `attachment` field.
## ChatMessages
`ChatMessage`s are the messages sent in 1-on-1 chats. They are similar to
`Note`s, but the addresing is done by having a single AP actor in the `to` `Note`s, but the addresing is done by having a single AP actor in the `to`
field. Addressing multiple actors is not allowed. These messages are always field. Addressing multiple actors is not allowed. These messages are always
private, there is no public version of them. They are created with a `Create` private, there is no public version of them. They are created with a `Create`
activity. activity.
They are part of the `litepub` namespace as `http://litepub.social/ns#ChatMessage`.
Example: Example:
```json ```json

37
docs/clients.md
View file

@ -7,97 +7,105 @@ Feel free to contact us to be added to this list!
- Homepage: <https://www.pleroma.com/#desktopApp> - Homepage: <https://www.pleroma.com/#desktopApp>
- Source Code: <https://github.com/roma-apps/roma-desktop> - Source Code: <https://github.com/roma-apps/roma-desktop>
- Platforms: Windows, Mac, Linux - Platforms: Windows, Mac, Linux
- Features: Streaming Ready - Features: MastoAPI, Streaming Ready
### Social ### Social
- Source Code: <https://gitlab.gnome.org/World/Social> - Source Code: <https://gitlab.gnome.org/World/Social>
- Contact: [@brainblasted@social.libre.fi](https://social.libre.fi/users/brainblasted) - Contact: [@brainblasted@social.libre.fi](https://social.libre.fi/users/brainblasted)
- Platforms: Linux (GNOME) - Platforms: Linux (GNOME)
- Note(2019-01-28): Not at a pre-alpha stage yet - Note(2019-01-28): Not at a pre-alpha stage yet
- Features: MastoAPI
### Whalebird ### Whalebird
- Homepage: <https://whalebird.org/> - Homepage: <https://whalebird.org/>
- Source Code: <https://github.com/h3poteto/whalebird-desktop> - Source Code: <https://github.com/h3poteto/whalebird-desktop>
- Contact: [@h3poteto@pleroma.io](https://pleroma.io/users/h3poteto) - Contact: [@h3poteto@pleroma.io](https://pleroma.io/users/h3poteto)
- Platforms: Windows, Mac, Linux - Platforms: Windows, Mac, Linux
- Features: Streaming Ready - Features: MastoAPI, Streaming Ready
## Handheld ## Handheld
### AndStatus
- Homepage: <http://andstatus.org/>
- Source Code: <https://github.com/andstatus/andstatus/>
- Platforms: Android
- Features: MastoAPI, ActivityPub (Client-to-Server)
### Amaroq ### Amaroq
- Homepage: <https://itunes.apple.com/us/app/amaroq-for-mastodon/id1214116200> - Homepage: <https://itunes.apple.com/us/app/amaroq-for-mastodon/id1214116200>
- Source Code: <https://github.com/ReticentJohn/Amaroq> - Source Code: <https://github.com/ReticentJohn/Amaroq>
- Contact: [@eurasierboy@mastodon.social](https://mastodon.social/users/eurasierboy) - Contact: [@eurasierboy@mastodon.social](https://mastodon.social/users/eurasierboy)
- Platforms: iOS - Platforms: iOS
- Features: No Streaming - Features: MastoAPI, No Streaming
### Fedilab ### Fedilab
- Homepage: <https://fedilab.app/> - Homepage: <https://fedilab.app/>
- Source Code: <https://framagit.org/tom79/fedilab/> - Source Code: <https://framagit.org/tom79/fedilab/>
- Contact: [@fedilab@framapiaf.org](https://framapiaf.org/users/fedilab) - Contact: [@fedilab@framapiaf.org](https://framapiaf.org/users/fedilab)
- Platforms: Android - Platforms: Android
- Features: Streaming Ready, Moderation, Text Formatting - Features: MastoAPI, Streaming Ready, Moderation, Text Formatting
### Kyclos ### Kyclos
- Source Code: <https://git.pleroma.social/pleroma/harbour-kyclos> - Source Code: <https://git.pleroma.social/pleroma/harbour-kyclos>
- Platforms: SailfishOS - Platforms: SailfishOS
- Features: No Streaming - Features: MastoAPI, No Streaming
### Husky ### Husky
- Source code: <https://git.mentality.rip/FWGS/Husky> - Source code: <https://git.mentality.rip/FWGS/Husky>
- Contact: [@Husky@enigmatic.observer](https://enigmatic.observer/users/Husky) - Contact: [@Husky@enigmatic.observer](https://enigmatic.observer/users/Husky)
- Platforms: Android - Platforms: Android
- Features: No Streaming, Emoji Reactions, Text Formatting, FE Stickers - Features: MastoAPI, No Streaming, Emoji Reactions, Text Formatting, FE Stickers
### Fedi ### Fedi
- Homepage: <https://www.fediapp.com/> - Homepage: <https://www.fediapp.com/>
- Source Code: Proprietary, but gratis - Source Code: Proprietary, but gratis
- Platforms: iOS, Android - Platforms: iOS, Android
- Features: Pleroma-specific features like Reactions - Features: MastoAPI, Pleroma-specific features like Reactions
### Tusky ### Tusky
- Homepage: <https://tuskyapp.github.io/> - Homepage: <https://tuskyapp.github.io/>
- Source Code: <https://github.com/tuskyapp/Tusky> - Source Code: <https://github.com/tuskyapp/Tusky>
- Contact: [@ConnyDuck@mastodon.social](https://mastodon.social/users/ConnyDuck) - Contact: [@ConnyDuck@mastodon.social](https://mastodon.social/users/ConnyDuck)
- Platforms: Android - Platforms: Android
- Features: No Streaming - Features: MastoAPI, No Streaming
### Twidere ### Twidere
- Homepage: <https://twidere.mariotaku.org/> - Homepage: <https://twidere.mariotaku.org/>
- Source Code: <https://github.com/TwidereProject/Twidere-Android/> - Source Code: <https://github.com/TwidereProject/Twidere-Android/>
- Contact: <me@mariotaku.org> - Contact: <me@mariotaku.org>
- Platform: Android - Platform: Android
- Features: No Streaming - Features: MastoAPI, No Streaming
### Indigenous ### Indigenous
- Homepage: <https://indigenous.realize.be/> - Homepage: <https://indigenous.realize.be/>
- Source Code: <https://github.com/swentel/indigenous-android/> - Source Code: <https://github.com/swentel/indigenous-android/>
- Contact: [@realize.be@realize.be](@realize.be@realize.be) - Contact: [@swentel@realize.be](https://realize.be)
- Platforms: Android - Platforms: Android
- Features: No Streaming - Features: MastoAPI, No Streaming
## Alternative Web Interfaces ## Alternative Web Interfaces
### Brutaldon ### Brutaldon
- Homepage: <https://jfm.carcosa.net/projects/software/brutaldon/> - Homepage: <https://jfm.carcosa.net/projects/software/brutaldon/>
- Source Code: <https://git.carcosa.net/jmcbray/brutaldon> - Source Code: <https://git.carcosa.net/jmcbray/brutaldon>
- Contact: [@gcupc@glitch.social](https://glitch.social/users/gcupc) - Contact: [@gcupc@glitch.social](https://glitch.social/users/gcupc)
- Features: No Streaming - Features: MastoAPI, No Streaming
### Halcyon ### Halcyon
- Source Code: <https://notabug.org/halcyon-suite/halcyon> - Source Code: <https://notabug.org/halcyon-suite/halcyon>
- Contact: [@halcyon@social.csswg.org](https://social.csswg.org/users/halcyon) - Contact: [@halcyon@social.csswg.org](https://social.csswg.org/users/halcyon)
- Features: Streaming Ready - Features: MastoAPI, Streaming Ready
### Pinafore ### Pinafore
- Homepage: <https://pinafore.social/> - Homepage: <https://pinafore.social/>
- Source Code: <https://github.com/nolanlawson/pinafore> - Source Code: <https://github.com/nolanlawson/pinafore>
- Contact: [@pinafore@mastodon.technology](https://mastodon.technology/users/pinafore) - Contact: [@pinafore@mastodon.technology](https://mastodon.technology/users/pinafore)
- Note: Pleroma support is a secondary goal - Note: Pleroma support is a secondary goal
- Features: No Streaming - Features: MastoAPI, No Streaming
### Sengi ### Sengi
- Homepage: <https://nicolasconstant.github.io/sengi/> - Homepage: <https://nicolasconstant.github.io/sengi/>
- Source Code: <https://github.com/NicolasConstant/sengi> - Source Code: <https://github.com/NicolasConstant/sengi>
- Contact: [@sengi_app@mastodon.social](https://mastodon.social/users/sengi_app) - Contact: [@sengi_app@mastodon.social](https://mastodon.social/users/sengi_app)
- Features: MastoAPI
### DashFE ### DashFE
- Source Code: <https://notabug.org/daisuke/DashboardFE> - Source Code: <https://notabug.org/daisuke/DashboardFE>
@ -107,3 +115,4 @@ Feel free to contact us to be added to this list!
- Source Code: <https://git.freesoftwareextremist.com/bloat/> - Source Code: <https://git.freesoftwareextremist.com/bloat/>
- Contact: [@r@freesoftwareextremist.com](https://freesoftwareextremist.com/users/r) - Contact: [@r@freesoftwareextremist.com](https://freesoftwareextremist.com/users/r)
- Features: Does not requires JavaScript - Features: Does not requires JavaScript
- Features: MastoAPI

67
docs/configuration/cheatsheet.md
View file

@ -18,7 +18,7 @@ To add configuration to your config file, you can copy it from the base config.
* `notify_email`: Email used for notifications. * `notify_email`: Email used for notifications.
* `description`: The instance’s description, can be seen in nodeinfo and ``/api/v1/instance``. * `description`: The instance’s description, can be seen in nodeinfo and ``/api/v1/instance``.
* `limit`: Posts character limit (CW/Subject included in the counter). * `limit`: Posts character limit (CW/Subject included in the counter).
* `discription_limit`: The character limit for image descriptions. * `description_limit`: The character limit for image descriptions.
* `chat_limit`: Character limit of the instance chat messages. * `chat_limit`: Character limit of the instance chat messages.
* `remote_limit`: Hard character limit beyond which remote posts will be dropped. * `remote_limit`: Hard character limit beyond which remote posts will be dropped.
* `upload_limit`: File size limit of uploads (except for avatar, background, banner). * `upload_limit`: File size limit of uploads (except for avatar, background, banner).
@ -40,12 +40,12 @@ To add configuration to your config file, you can copy it from the base config.
* `allow_relay`: Enable Pleroma’s Relay, which makes it possible to follow a whole instance. * `allow_relay`: Enable Pleroma’s Relay, which makes it possible to follow a whole instance.
* `public`: Makes the client API in authenticated mode-only except for user-profiles. Useful for disabling the Local Timeline and The Whole Known Network. Note that there is a dependent setting restricting or allowing unauthenticated access to specific resources, see `restrict_unauthenticated` for more details. * `public`: Makes the client API in authenticated mode-only except for user-profiles. Useful for disabling the Local Timeline and The Whole Known Network. Note that there is a dependent setting restricting or allowing unauthenticated access to specific resources, see `restrict_unauthenticated` for more details.
* `quarantined_instances`: List of ActivityPub instances where private (DMs, followers-only) activities will not be send. * `quarantined_instances`: List of ActivityPub instances where private (DMs, followers-only) activities will not be send.
* `managed_config`: Whenether the config for pleroma-fe is configured in [:frontend_configurations](#frontend_configurations) or in ``static/config.json``.
* `allowed_post_formats`: MIME-type list of formats allowed to be posted (transformed into HTML). * `allowed_post_formats`: MIME-type list of formats allowed to be posted (transformed into HTML).
* `extended_nickname_format`: Set to `true` to use extended local nicknames format (allows underscores/dashes). This will break federation with * `extended_nickname_format`: Set to `true` to use extended local nicknames format (allows underscores/dashes). This will break federation with
older software for theses nicknames. older software for theses nicknames.
* `max_pinned_statuses`: The maximum number of pinned statuses. `0` will disable the feature. * `max_pinned_statuses`: The maximum number of pinned statuses. `0` will disable the feature.
* `autofollowed_nicknames`: Set to nicknames of (local) users that every new user should automatically follow. * `autofollowed_nicknames`: Set to nicknames of (local) users that every new user should automatically follow.
* `autofollowing_nicknames`: Set to nicknames of (local) users that automatically follows every newly registered user.
* `attachment_links`: Set to true to enable automatically adding attachment link text to statuses. * `attachment_links`: Set to true to enable automatically adding attachment link text to statuses.
* `max_report_comment_size`: The maximum size of the report comment (Default: `1000`). * `max_report_comment_size`: The maximum size of the report comment (Default: `1000`).
* `safe_dm_mentions`: If set to true, only mentions at the beginning of a post will be used to address people in direct messages. This is to prevent accidental mentioning of people when talking about them (e.g. "@friend hey i really don't like @enemy"). Default: `false`. * `safe_dm_mentions`: If set to true, only mentions at the beginning of a post will be used to address people in direct messages. This is to prevent accidental mentioning of people when talking about them (e.g. "@friend hey i really don't like @enemy"). Default: `false`.
@ -114,7 +114,7 @@ To add configuration to your config file, you can copy it from the base config.
* `Pleroma.Web.ActivityPub.MRF.MentionPolicy`: Drops posts mentioning configurable users. (See [`:mrf_mention`](#mrf_mention)). * `Pleroma.Web.ActivityPub.MRF.MentionPolicy`: Drops posts mentioning configurable users. (See [`:mrf_mention`](#mrf_mention)).
* `Pleroma.Web.ActivityPub.MRF.VocabularyPolicy`: Restricts activities to a configured set of vocabulary. (See [`:mrf_vocabulary`](#mrf_vocabulary)). * `Pleroma.Web.ActivityPub.MRF.VocabularyPolicy`: Restricts activities to a configured set of vocabulary. (See [`:mrf_vocabulary`](#mrf_vocabulary)).
* `Pleroma.Web.ActivityPub.MRF.ObjectAgePolicy`: Rejects or delists posts based on their age when received. (See [`:mrf_object_age`](#mrf_object_age)). * `Pleroma.Web.ActivityPub.MRF.ObjectAgePolicy`: Rejects or delists posts based on their age when received. (See [`:mrf_object_age`](#mrf_object_age)).
* `Pleroma.Web.ActivityPub.MRF.ActivityExpirationPolicy`: Sets a default expiration on all posts made by users of the local instance. Requires `Pleroma.ActivityExpiration` to be enabled for processing the scheduled delections. * `Pleroma.Web.ActivityPub.MRF.ActivityExpirationPolicy`: Sets a default expiration on all posts made by users of the local instance. Requires `Pleroma.Workers.PurgeExpiredActivity` to be enabled for processing the scheduled delections.
* `Pleroma.Web.ActivityPub.MRF.ForceBotUnlistedPolicy`: Makes all bot posts to disappear from public timelines. * `Pleroma.Web.ActivityPub.MRF.ForceBotUnlistedPolicy`: Makes all bot posts to disappear from public timelines.
* `transparency`: Make the content of your Message Rewrite Facility settings public (via nodeinfo). * `transparency`: Make the content of your Message Rewrite Facility settings public (via nodeinfo).
* `transparency_exclusions`: Exclude specific instance names from MRF transparency. The use of the exclusions feature will be disclosed in nodeinfo as a boolean value. * `transparency_exclusions`: Exclude specific instance names from MRF transparency. The use of the exclusions feature will be disclosed in nodeinfo as a boolean value.
@ -220,11 +220,15 @@ config :pleroma, :mrf_user_allowlist, %{
* `total_user_limit`: the number of scheduled activities a user is allowed to create in total (Default: `300`) * `total_user_limit`: the number of scheduled activities a user is allowed to create in total (Default: `300`)
* `enabled`: whether scheduled activities are sent to the job queue to be executed * `enabled`: whether scheduled activities are sent to the job queue to be executed
## Pleroma.ActivityExpiration ## FedSockets
FedSockets is an experimental feature allowing for Pleroma backends to federate using a persistant websocket connection as opposed to making each federation a seperate http connection. This feature is currently off by default. It is configurable throught he following options.
Enables the worker which processes posts scheduled for deletion. Pinned posts are exempt from expiration. ### :fedsockets
* `enabled`: Enables FedSockets for this instance. `false` by default.
* `connection_duration`: Time an idle websocket is kept open.
* `rejection_duration`: Failures to connect via FedSockets will not be retried for this period of time.
* `fed_socket_fetches` and `fed_socket_rejections`: Settings passed to `cachex` for the fetch registry, and rejection stacks. See `Pleroma.Web.FedSockets` for more details.
* `enabled`: whether expired activities will be sent to the job queue to be deleted
## Frontends ## Frontends
@ -315,6 +319,14 @@ This section describe PWA manifest instance-specific values. Currently this opti
* `enabled`: Enables purge cache * `enabled`: Enables purge cache
* `provider`: Which one of the [purge cache strategy](#purge-cache-strategy) to use. * `provider`: Which one of the [purge cache strategy](#purge-cache-strategy) to use.
## :media_preview_proxy
* `enabled`: Enables proxying of remote media preview to the instance’s proxy. Requires enabled media proxy (`media_proxy/enabled`).
* `thumbnail_max_width`: Max width of preview thumbnail for images (video preview always has original dimensions).
* `thumbnail_max_height`: Max height of preview thumbnail for images (video preview always has original dimensions).
* `image_quality`: Quality of the output. Ranges from 0 (min quality) to 100 (max quality).
* `min_content_length`: Min content length to perform preview, in bytes. If greater than 0, media smaller in size will be served as is, without thumbnailing.
### Purge cache strategy ### Purge cache strategy
#### Pleroma.Web.MediaProxy.Invalidation.Script #### Pleroma.Web.MediaProxy.Invalidation.Script
@ -399,25 +411,25 @@ This will make Pleroma listen on `127.0.0.1` port `8080` and generate urls start
* ``referrer_policy``: The referrer policy to use, either `"same-origin"` or `"no-referrer"`. * ``referrer_policy``: The referrer policy to use, either `"same-origin"` or `"no-referrer"`.
* ``report_uri``: Adds the specified url to `report-uri` and `report-to` group in CSP header. * ``report_uri``: Adds the specified url to `report-uri` and `report-to` group in CSP header.
### Pleroma.Plugs.RemoteIp ### Pleroma.Web.Plugs.RemoteIp
!!! warning !!! warning
If your instance is not behind at least one reverse proxy, you should not enable this plug. If your instance is not behind at least one reverse proxy, you should not enable this plug.
`Pleroma.Plugs.RemoteIp` is a shim to call [`RemoteIp`](https://git.pleroma.social/pleroma/remote_ip) but with runtime configuration. `Pleroma.Web.Plugs.RemoteIp` is a shim to call [`RemoteIp`](https://git.pleroma.social/pleroma/remote_ip) but with runtime configuration.
Available options: Available options:
* `enabled` - Enable/disable the plug. Defaults to `false`. * `enabled` - Enable/disable the plug. Defaults to `false`.
* `headers` - A list of strings naming the `req_headers` to use when deriving the `remote_ip`. Order does not matter. Defaults to `["x-forwarded-for"]`. * `headers` - A list of strings naming the HTTP headers to use when deriving the true client IP address. Defaults to `["x-forwarded-for"]`.
* `proxies` - A list of strings in [CIDR](https://en.wikipedia.org/wiki/CIDR) notation specifying the IPs of known proxies. Defaults to `[]`. * `proxies` - A list of upstream proxy IP subnets in CIDR notation from which we will parse the content of `headers`. Defaults to `[]`. IPv4 entries without a bitmask will be assumed to be /32 and IPv6 /128.
* `reserved` - Defaults to [localhost](https://en.wikipedia.org/wiki/Localhost) and [private network](https://en.wikipedia.org/wiki/Private_network). * `reserved` - A list of reserved IP subnets in CIDR notation which should be ignored if found in `headers`. Defaults to `["127.0.0.0/8", "::1/128", "fc00::/7", "10.0.0.0/8", "172.16.0.0/12", "192.168.0.0/16"]`.
### :rate_limit ### :rate_limit
!!! note !!! note
If your instance is behind a reverse proxy ensure [`Pleroma.Plugs.RemoteIp`](#pleroma-plugs-remoteip) is enabled (it is enabled by default). If your instance is behind a reverse proxy ensure [`Pleroma.Web.Plugs.RemoteIp`](#pleroma-plugs-remoteip) is enabled (it is enabled by default).
A keyword list of rate limiters where a key is a limiter name and value is the limiter configuration. The basic configuration is a tuple where: A keyword list of rate limiters where a key is a limiter name and value is the limiter configuration. The basic configuration is a tuple where:
@ -691,9 +703,8 @@ Pleroma has the following queues:
Pleroma has these periodic job workers: Pleroma has these periodic job workers:
`Pleroma.Workers.Cron.ClearOauthTokenWorker` - a job worker to cleanup expired oauth tokens. * `Pleroma.Workers.Cron.DigestEmailsWorker` - digest emails for users with new mentions and follows
* `Pleroma.Workers.Cron.NewUsersDigestWorker` - digest emails for admins with new registrations
Example:
```elixir ```elixir
config :pleroma, Oban, config :pleroma, Oban,
@ -705,7 +716,8 @@ config :pleroma, Oban,
federator_outgoing: 50 federator_outgoing: 50
], ],
crontab: [ crontab: [
{"0 0 * * *", Pleroma.Workers.Cron.ClearOauthTokenWorker} {"0 0 * * 0", Pleroma.Workers.Cron.DigestEmailsWorker},
{"0 0 * * *", Pleroma.Workers.Cron.NewUsersDigestWorker}
] ]
``` ```
@ -972,7 +984,7 @@ Configure OAuth 2 provider capabilities:
* `token_expires_in` - The lifetime in seconds of the access token. * `token_expires_in` - The lifetime in seconds of the access token.
* `issue_new_refresh_token` - Keeps old refresh token or generate new refresh token when to obtain an access token. * `issue_new_refresh_token` - Keeps old refresh token or generate new refresh token when to obtain an access token.
* `clean_expired_tokens` - Enable a background job to clean expired oauth tokens. Defaults to `false`. Interval settings sets in configuration periodic jobs [`Oban.Cron`](#obancron) * `clean_expired_tokens` - Enable a background job to clean expired oauth tokens. Defaults to `false`.
## Link parsing ## Link parsing
@ -1066,6 +1078,20 @@ Control favicons for instances.
* `enabled`: Allow/disallow displaying and getting instances favicons * `enabled`: Allow/disallow displaying and getting instances favicons
## Pleroma.User.Backup
!!! note
Requires enabled email
* `:purge_after_days` an integer, remove backup achives after N days.
* `:limit_days` an integer, limit user to export not more often than once per N days.
* `:dir` a string with a path to backup temporary directory or `nil` to let Pleroma choose temporary directory in the following order:
1. the directory named by the TMPDIR environment variable
2. the directory named by the TEMP environment variable
3. the directory named by the TMP environment variable
4. C:\TMP on Windows or /tmp on Unix-like operating systems
5. as a last resort, the current working directory
## Frontend management ## Frontend management
Frontends in Pleroma are swappable - you can specify which one to use here. Frontends in Pleroma are swappable - you can specify which one to use here.
@ -1091,3 +1117,10 @@ config :pleroma, :frontends,
``` ```
This would serve the frontend from the the folder at `$instance_static/frontends/pleroma/stable`. You have to copy the frontend into this folder yourself. You can choose the name and ref any way you like, but they will be used by mix tasks to automate installation in the future, the name referring to the project and the ref referring to a commit. This would serve the frontend from the the folder at `$instance_static/frontends/pleroma/stable`. You have to copy the frontend into this folder yourself. You can choose the name and ref any way you like, but they will be used by mix tasks to automate installation in the future, the name referring to the project and the ref referring to a commit.
## Ephemeral activities (Pleroma.Workers.PurgeExpiredActivity)
Settings to enable and configure expiration for ephemeral activities
* `:enabled` - enables ephemeral activities creation
* `:min_lifetime` - minimum lifetime for ephemeral activities (in seconds). Default: 10 minutes.

136
docs/configuration/howto_ejabberd.md Normal file
View file

@ -0,0 +1,136 @@
# Configuring Ejabberd (XMPP Server) to use Pleroma for authentication
If you want to give your Pleroma users an XMPP (chat) account, you can configure [Ejabberd](https://github.com/processone/ejabberd) to use your Pleroma server for user authentication, automatically giving every local user an XMPP account.
In general, you just have to follow the configuration described at [https://docs.ejabberd.im/admin/configuration/authentication/#external-script](https://docs.ejabberd.im/admin/configuration/authentication/#external-script). Please read this section carefully.
Copy the script below to suitable path on your system and set owner and permissions. Also do not forget adjusting `PLEROMA_HOST` and `PLEROMA_PORT`, if necessary.
```bash
cp pleroma_ejabberd_auth.py /etc/ejabberd/pleroma_ejabberd_auth.py
chown ejabberd /etc/ejabberd/pleroma_ejabberd_auth.py
chmod 700 /etc/ejabberd/pleroma_ejabberd_auth.py
```
Set external auth params in ejabberd.yaml file:
```bash
auth_method: [external]
extauth_program: "python3 /etc/ejabberd/pleroma_ejabberd_auth.py"
extauth_instances: 3
auth_use_cache: false
```
Restart / reload your ejabberd service.
After restarting your Ejabberd server, your users should now be able to connect with their Pleroma credentials.
```python
import sys
import struct
import http.client
from base64 import b64encode
import logging
PLEROMA_HOST = "127.0.0.1"
PLEROMA_PORT = "4000"
AUTH_ENDPOINT = "/api/v1/accounts/verify_credentials"
USER_ENDPOINT = "/api/v1/accounts"
LOGFILE = "/var/log/ejabberd/pleroma_auth.log"
logging.basicConfig(filename=LOGFILE, level=logging.INFO)
# Pleroma functions
def create_connection():
return http.client.HTTPConnection(PLEROMA_HOST, PLEROMA_PORT)
def verify_credentials(user: str, password: str) -> bool:
user_pass_b64 = b64encode("{}:{}".format(
user, password).encode('utf-8')).decode("ascii")
params = {}
headers = {
"Authorization": "Basic {}".format(user_pass_b64)
}
try:
conn = create_connection()
conn.request("GET", AUTH_ENDPOINT, params, headers)
response = conn.getresponse()
if response.status == 200:
return True
return False
except Exception as e:
logging.info("Can not connect: %s", str(e))
return False
def does_user_exist(user: str) -> bool:
conn = create_connection()
conn.request("GET", "{}/{}".format(USER_ENDPOINT, user))
response = conn.getresponse()
if response.status == 200:
return True
return False
def auth(username: str, server: str, password: str) -> bool:
return verify_credentials(username, password)
def isuser(username, server):
return does_user_exist(username)
def read():
(pkt_size,) = struct.unpack('>H', bytes(sys.stdin.read(2), encoding='utf8'))
pkt = sys.stdin.read(pkt_size)
cmd = pkt.split(':')[0]
if cmd == 'auth':
username, server, password = pkt.split(':', 3)[1:]
write(auth(username, server, password))
elif cmd == 'isuser':
username, server = pkt.split(':', 2)[1:]
write(isuser(username, server))
elif cmd == 'setpass':
# u, s, p = pkt.split(':', 3)[1:]
write(False)
elif cmd == 'tryregister':
# u, s, p = pkt.split(':', 3)[1:]
write(False)
elif cmd == 'removeuser':
# u, s = pkt.split(':', 2)[1:]
write(False)
elif cmd == 'removeuser3':
# u, s, p = pkt.split(':', 3)[1:]
write(False)
else:
write(False)
def write(result):
if result:
sys.stdout.write('\x00\x02\x00\x01')
else:
sys.stdout.write('\x00\x02\x00\x00')
sys.stdout.flush()
if __name__ == "__main__":
logging.info("Starting pleroma ejabberd auth daemon...")
while True:
try:
read()
except Exception as e:
logging.info(
"Error while processing data from ejabberd %s", str(e))
pass
```

4
docs/dev.md
View file

@ -6,7 +6,7 @@ This document contains notes and guidelines for Pleroma developers.
* Pleroma supports hierarchical OAuth scopes, just like Mastodon but with added granularity of admin scopes. For a reference, see [Mastodon OAuth scopes](https://docs.joinmastodon.org/api/oauth-scopes/). * Pleroma supports hierarchical OAuth scopes, just like Mastodon but with added granularity of admin scopes. For a reference, see [Mastodon OAuth scopes](https://docs.joinmastodon.org/api/oauth-scopes/).
* It is important to either define OAuth scope restrictions or explicitly mark OAuth scope check as skipped, for every controller action. To define scopes, call `plug(Pleroma.Plugs.OAuthScopesPlug, %{scopes: [...]})`. To explicitly set OAuth scopes check skipped, call `plug(:skip_plug, Pleroma.Plugs.OAuthScopesPlug <when ...>)`. * It is important to either define OAuth scope restrictions or explicitly mark OAuth scope check as skipped, for every controller action. To define scopes, call `plug(Pleroma.Web.Plugs.OAuthScopesPlug, %{scopes: [...]})`. To explicitly set OAuth scopes check skipped, call `plug(:skip_plug, Pleroma.Web.Plugs.OAuthScopesPlug <when ...>)`.
* In controllers, `use Pleroma.Web, :controller` will result in `action/2` (see `Pleroma.Web.controller/0` for definition) be called prior to actual controller action, and it'll perform security / privacy checks before passing control to actual controller action. * In controllers, `use Pleroma.Web, :controller` will result in `action/2` (see `Pleroma.Web.controller/0` for definition) be called prior to actual controller action, and it'll perform security / privacy checks before passing control to actual controller action.
@ -16,7 +16,7 @@ This document contains notes and guidelines for Pleroma developers.
## [HTTP Basic Authentication](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Authorization) ## [HTTP Basic Authentication](https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Authorization)
* With HTTP Basic Auth, OAuth scopes check is _not_ performed for any action (since password is provided during the auth, requester is able to obtain a token with full permissions anyways). `Pleroma.Plugs.AuthenticationPlug` and `Pleroma.Plugs.LegacyAuthenticationPlug` both call `Pleroma.Plugs.OAuthScopesPlug.skip_plug(conn)` when password is provided. * With HTTP Basic Auth, OAuth scopes check is _not_ performed for any action (since password is provided during the auth, requester is able to obtain a token with full permissions anyways). `Pleroma.Web.Plugs.AuthenticationPlug` and `Pleroma.Web.Plugs.LegacyAuthenticationPlug` both call `Pleroma.Web.Plugs.OAuthScopesPlug.skip_plug(conn)` when password is provided.
## Auth-related configuration, OAuth consumer mode etc. ## Auth-related configuration, OAuth consumer mode etc.

14
docs/installation/alpine_linux_en.md
View file

@ -13,6 +13,7 @@ It assumes that you have administrative rights, either as root or a user with [s
* `erlang-parsetools` * `erlang-parsetools`
* `erlang-xmerl` * `erlang-xmerl`
* `git` * `git`
* `file-dev`
* Development Tools * Development Tools
* `cmake` * `cmake`
@ -20,6 +21,9 @@ It assumes that you have administrative rights, either as root or a user with [s
* `nginx` (preferred, example configs for other reverse proxies can be found in the repo) * `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
* `certbot` (or any other ACME client for Let’s Encrypt certificates) * `certbot` (or any other ACME client for Let’s Encrypt certificates)
* `ImageMagick`
* `ffmpeg`
* `exiftool`
### Prepare the system ### Prepare the system
@ -29,7 +33,6 @@ It assumes that you have administrative rights, either as root or a user with [s
awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/repositories awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/repositories
``` ```
* Then update the system, if not already done: * Then update the system, if not already done:
```shell ```shell
@ -40,7 +43,7 @@ sudo apk upgrade
* Install some tools, which are needed later: * Install some tools, which are needed later:
```shell ```shell
sudo apk add git build-base cmake sudo apk add git build-base cmake file-dev
``` ```
### Install Elixir and Erlang ### Install Elixir and Erlang
@ -56,6 +59,7 @@ sudo apk add erlang erlang-runtime-tools erlang-xmerl elixir
```shell ```shell
sudo apk add erlang-eldap sudo apk add erlang-eldap
``` ```
### Install PostgreSQL ### Install PostgreSQL
* Install Postgresql server: * Install Postgresql server:
@ -76,6 +80,12 @@ sudo /etc/init.d/postgresql start
sudo rc-update add postgresql sudo rc-update add postgresql
``` ```
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
```shell
sudo apk add ffmpeg imagemagick exiftool
```
### Install PleromaBE ### Install PleromaBE
* Add a new system user for the Pleroma service: * Add a new system user for the Pleroma service:

12
docs/installation/arch_linux_en.md
View file

@ -10,11 +10,15 @@ This guide will assume that you have administrative rights, either as root or a
* `git` * `git`
* `base-devel` * `base-devel`
* `cmake` * `cmake`
* `file`
#### Optional packages used in this guide #### Optional packages used in this guide
* `nginx` (preferred, example configs for other reverse proxies can be found in the repo) * `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
* `certbot` (or any other ACME client for Let’s Encrypt certificates) * `certbot` (or any other ACME client for Let’s Encrypt certificates)
* `ImageMagick`
* `ffmpeg`
* `exiftool`
### Prepare the system ### Prepare the system
@ -27,7 +31,7 @@ sudo pacman -Syu
* Install some of the above mentioned programs: * Install some of the above mentioned programs:
```shell ```shell
sudo pacman -S git base-devel elixir cmake sudo pacman -S git base-devel elixir cmake file
``` ```
### Install PostgreSQL ### Install PostgreSQL
@ -52,6 +56,12 @@ sudo -iu postgres initdb -D /var/lib/postgres/data
sudo systemctl enable --now postgresql.service sudo systemctl enable --now postgresql.service
``` ```
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
```shell
sudo pacman -S ffmpeg imagemagick perl-image-exiftool
```
### Install PleromaBE ### Install PleromaBE
* Add a new system user for the Pleroma service: * Add a new system user for the Pleroma service:

14
docs/installation/debian_based_en.md
View file

@ -10,6 +10,7 @@ This guide will assume you are on Debian Stretch. This guide should also work wi
* `elixir` (1.8+, Follow the guide to install from the Erlang Solutions repo or use [asdf](https://github.com/asdf-vm/asdf) as the pleroma user) * `elixir` (1.8+, Follow the guide to install from the Erlang Solutions repo or use [asdf](https://github.com/asdf-vm/asdf) as the pleroma user)
* `erlang-dev` * `erlang-dev`
* `erlang-nox` * `erlang-nox`
* `libmagic-dev`
* `git` * `git`
* `build-essential` * `build-essential`
* `cmake` * `cmake`
@ -18,6 +19,9 @@ This guide will assume you are on Debian Stretch. This guide should also work wi
* `nginx` (preferred, example configs for other reverse proxies can be found in the repo) * `nginx` (preferred, example configs for other reverse proxies can be found in the repo)
* `certbot` (or any other ACME client for Let’s Encrypt certificates) * `certbot` (or any other ACME client for Let’s Encrypt certificates)
* `ImageMagick`
* `ffmpeg`
* `exiftool`
### Prepare the system ### Prepare the system
@ -31,7 +35,7 @@ sudo apt full-upgrade
* Install some of the above mentioned programs: * Install some of the above mentioned programs:
```shell ```shell
sudo apt install git build-essential postgresql postgresql-contrib cmake sudo apt install git build-essential postgresql postgresql-contrib cmake libmagic-devel
``` ```
### Install Elixir and Erlang ### Install Elixir and Erlang
@ -50,6 +54,12 @@ sudo apt update
sudo apt install elixir erlang-dev erlang-nox sudo apt install elixir erlang-dev erlang-nox
``` ```
### Optional packages: [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md)
```shell
sudo apt install imagemagick ffmpeg libimage-exiftool-perl
```
### Install PleromaBE ### Install PleromaBE
* Add a new system user for the Pleroma service: * Add a new system user for the Pleroma service:
@ -91,6 +101,7 @@ sudo -Hu pleroma mix deps.get
mv config/{generated_config.exs,prod.secret.exs} mv config/{generated_config.exs,prod.secret.exs}
``` ```
* The previous command creates also the file `config/setup_db.psql`, with which you can create the database: * The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
```shell ```shell
@ -171,6 +182,7 @@ sudo cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.se
``` ```
* Edit the service file and make sure that all paths fit your installation * Edit the service file and make sure that all paths fit your installation
* Check that `EnvironmentFile` contains the correct path to the env file. Or generate the env file: `sudo -Hu pleroma mix pleroma.release_env gen`
* Enable and start `pleroma.service`: * Enable and start `pleroma.service`:
```shell ```shell

13
docs/installation/debian_based_jp.md
View file

@ -17,11 +17,15 @@
- `git` - `git`
- `build-essential` - `build-essential`
- `cmake` - `cmake`
- `libmagic-dev`
#### このガイドで利用している追加パッケージ #### このガイドで利用している追加パッケージ
- `nginx` (おすすめです。他のリバースプロキシを使う場合は、参考となる設定をこのリポジトリから探してください) - `nginx` (おすすめです。他のリバースプロキシを使う場合は、参考となる設定をこのリポジトリから探してください)
- `certbot` (または何らかのLet's Encrypt向けACMEクライアント) - `certbot` (または何らかのLet's Encrypt向けACMEクライアント)
- `ImageMagick`
- `ffmpeg`
- `exiftool`
### システムを準備する ### システムを準備する
@ -33,10 +37,9 @@ sudo apt full-upgrade
* 上記に挙げたパッケージをインストールしておきます。 * 上記に挙げたパッケージをインストールしておきます。
``` ```
sudo apt install git build-essential postgresql postgresql-contrib cmake sudo apt install git build-essential postgresql postgresql-contrib cmake ffmpeg imagemagick libmagic-dev
``` ```
### ElixirとErlangをインストールします ### ElixirとErlangをインストールします
* Erlangのリポジトリをダウンロードおよびインストールします。 * Erlangのリポジトリをダウンロードおよびインストールします。
@ -51,6 +54,12 @@ sudo apt update
sudo apt install elixir erlang-dev erlang-nox sudo apt install elixir erlang-dev erlang-nox
``` ```
### オプションパッケージ: [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md)
```shell
sudo apt install imagemagick ffmpeg libimage-exiftool-perl
```
### Pleroma BE (バックエンド) をインストールします ### Pleroma BE (バックエンド) をインストールします
* Pleroma用に新しいユーザーを作ります。 * Pleroma用に新しいユーザーを作ります。

6
docs/installation/freebsd_en.md
View file

@ -26,6 +26,12 @@ Setup the required services to automatically start at boot, using `sysrc(8)`.
# service postgresql start # service postgresql start
``` ```
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
```shell
# pkg install imagemagick ffmpeg p5-Image-ExifTool
```
## Configuring Pleroma ## Configuring Pleroma
Create a user for Pleroma: Create a user for Pleroma:

12
docs/installation/gentoo_en.md
View file

@ -29,12 +29,16 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
* `dev-lang/elixir` * `dev-lang/elixir`
* `dev-vcs/git` * `dev-vcs/git`
* `dev-util/cmake` * `dev-util/cmake`
* `sys-apps/file`
#### Optional ebuilds used in this guide #### Optional ebuilds used in this guide
* `www-servers/nginx` (preferred, example configs for other reverse proxies can be found in the repo) * `www-servers/nginx` (preferred, example configs for other reverse proxies can be found in the repo)
* `app-crypt/certbot` (or any other ACME client for Let’s Encrypt certificates) * `app-crypt/certbot` (or any other ACME client for Let’s Encrypt certificates)
* `app-crypt/certbot-nginx` (nginx certbot plugin that allows use of the all-powerful `--nginx` flag on certbot) * `app-crypt/certbot-nginx` (nginx certbot plugin that allows use of the all-powerful `--nginx` flag on certbot)
* `media-gfx/imagemagick`
* `media-video/ffmpeg`
* `media-libs/exiftool`
### Prepare the system ### Prepare the system
@ -47,7 +51,7 @@ Gentoo quite pointedly does not come with a cron daemon installed, and as such i
* Emerge all required the required and suggested software in one go: * Emerge all required the required and suggested software in one go:
```shell ```shell
# emerge --ask dev-db/postgresql dev-lang/elixir dev-vcs/git www-servers/nginx app-crypt/certbot app-crypt/certbot-nginx dev-util/cmake # emerge --ask dev-db/postgresql dev-lang/elixir dev-vcs/git www-servers/nginx app-crypt/certbot app-crypt/certbot-nginx dev-util/cmake sys-apps/file
``` ```
If you would not like to install the optional packages, remove them from this line. If you would not like to install the optional packages, remove them from this line.
@ -87,6 +91,12 @@ If you do not plan to make any modifications to your Pleroma instance, cloning d
Not only does this make it much easier to deploy changes you make, as you can commit and pull from upstream and all that good stuff from the comfort of your local machine then simply `git pull` on your instance server when you're ready to deploy, it also ensures you are compliant with the Affero General Public Licence that Pleroma is licenced under, which stipulates that all network services provided with modified AGPL code must publish their changes on a publicly available internet service and for free. It also makes it much easier to ask for help from and provide help to your fellow Pleroma admins if your public repo always reflects what you are running because it is part of your deployment procedure. Not only does this make it much easier to deploy changes you make, as you can commit and pull from upstream and all that good stuff from the comfort of your local machine then simply `git pull` on your instance server when you're ready to deploy, it also ensures you are compliant with the Affero General Public Licence that Pleroma is licenced under, which stipulates that all network services provided with modified AGPL code must publish their changes on a publicly available internet service and for free. It also makes it much easier to ask for help from and provide help to your fellow Pleroma admins if your public repo always reflects what you are running because it is part of your deployment procedure.
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
```shell
# emerge --ask media-video/ffmpeg media-gfx/imagemagick media-libs/exiftool
```
### Install PleromaBE ### Install PleromaBE
* Add a new system user for the Pleroma service and set up default directories: * Add a new system user for the Pleroma service and set up default directories:

6
docs/installation/netbsd_en.md
View file

@ -10,7 +10,7 @@ Pleroma uses.
The `mksh` shell is needed to run the Elixir `mix` script. The `mksh` shell is needed to run the Elixir `mix` script.
`# pkgin install acmesh elixir git-base git-docs mksh nginx postgresql11-server postgresql11-client postgresql11-contrib sudo` `# pkgin install acmesh elixir git-base git-docs mksh nginx postgresql11-server postgresql11-client postgresql11-contrib sudo ffmpeg4 ImageMagick`
You can also build these packages using pkgsrc: You can also build these packages using pkgsrc:
``` ```
@ -44,6 +44,10 @@ pgsql=YES
First, run `# /etc/rc.d/pgsql start`. Then, `$ sudo -Hu pgsql -g pgsql createdb`. First, run `# /etc/rc.d/pgsql start`. Then, `$ sudo -Hu pgsql -g pgsql createdb`.
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md))
`# pkgin install ImageMagick ffmpeg4 p5-Image-ExifTool`
## Configuring Pleroma ## Configuring Pleroma
Create a user for Pleroma: Create a user for Pleroma:

18
docs/installation/openbsd_en.md
View file

@ -10,20 +10,34 @@ The following packages need to be installed:
* elixir * elixir
* gmake * gmake
* ImageMagick
* git * git
* postgresql-server * postgresql-server
* postgresql-contrib * postgresql-contrib
* cmake * cmake
* ffmpeg
* ImageMagick
To install them, run the following command (with doas or as root): To install them, run the following command (with doas or as root):
``` ```
pkg_add elixir gmake ImageMagick git postgresql-server postgresql-contrib cmake pkg_add elixir gmake git postgresql-server postgresql-contrib cmake ffmpeg ImageMagick
``` ```
Pleroma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt. Pleroma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt.
#### Optional software
Per [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md):
* ImageMagick
* ffmpeg
* exiftool
To install the above:
```
pkg_add ImageMagick ffmpeg p5-Image-ExifTool
```
#### Creating the pleroma user #### Creating the pleroma user
Pleroma will be run by a dedicated user, \_pleroma. Before creating it, insert the following lines in login.conf: Pleroma will be run by a dedicated user, \_pleroma. Before creating it, insert the following lines in login.conf:
``` ```

13
docs/installation/openbsd_fi.md
View file

@ -16,7 +16,18 @@ Matrix-kanava #freenode_#pleroma:matrix.org ovat hyviä paikkoja löytää apua
Asenna tarvittava ohjelmisto: Asenna tarvittava ohjelmisto:
`# pkg_add git elixir gmake postgresql-server-10.3 postgresql-contrib-10.3 cmake` `# pkg_add git elixir gmake postgresql-server-10.3 postgresql-contrib-10.3 cmake ffmpeg ImageMagick`
#### Optional software
[`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md):
* ImageMagick
* ffmpeg
* exiftool
Asenna tarvittava ohjelmisto:
`# pkg_add ImageMagick ffmpeg p5-Image-ExifTool`
Luo postgresql-tietokanta: Luo postgresql-tietokanta:

32
docs/installation/optional/media_graphics_packages.md Normal file
View file

@ -0,0 +1,32 @@
# Optional software packages needed for specific functionality
For specific Pleroma functionality (which is disabled by default) some or all of the below packages are required:
* `ImageMagic`
* `ffmpeg`
* `exiftool`
Please refer to documentation in `docs/installation` on how to install them on specific OS.
Note: the packages are not required with the current default settings of Pleroma.
## `ImageMagick`
`ImageMagick` is a set of tools to create, edit, compose, or convert bitmap images.
It is required for the following Pleroma features:
* `Pleroma.Upload.Filters.Mogrify`, `Pleroma.Upload.Filters.Mogrifun` upload filters (related config: `Plaroma.Upload/filters` in `config/config.exs`)
* Media preview proxy for still images (related config: `media_preview_proxy/enabled` in `config/config.exs`)
## `ffmpeg`
`ffmpeg` is software to record, convert and stream audio and video.
It is required for the following Pleroma features:
* Media preview proxy for videos (related config: `media_preview_proxy/enabled` in `config/config.exs`)
## `exiftool`
`exiftool` is media files metadata reader/writer.
It is required for the following Pleroma features:
* `Pleroma.Upload.Filters.Exiftool` upload filter (related config: `Plaroma.Upload/filters` in `config/config.exs`)

32
docs/installation/otp_en.md
View file

@ -27,17 +27,37 @@ Other than things bundled in the OTP release Pleroma depends on:
* PostgreSQL (also utilizes extensions in postgresql-contrib) * PostgreSQL (also utilizes extensions in postgresql-contrib)
* nginx (could be swapped with another reverse proxy but this guide covers only it) * nginx (could be swapped with another reverse proxy but this guide covers only it)
* certbot (for Let's Encrypt certificates, could be swapped with another ACME client, but this guide covers only it) * certbot (for Let's Encrypt certificates, could be swapped with another ACME client, but this guide covers only it)
* libmagic/file
=== "Alpine" === "Alpine"
``` ```
echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
apk update apk update
apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot apk add curl unzip ncurses postgresql postgresql-contrib nginx certbot file-dev
``` ```
=== "Debian/Ubuntu" === "Debian/Ubuntu"
``` ```
apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot apt install curl unzip libncurses5 postgresql postgresql-contrib nginx certbot libmagic-dev
```
### Installing optional packages
Per [`docs/installation/optional/media_graphics_packages.md`](optional/media_graphics_packages.md):
* ImageMagick
* ffmpeg
* exiftool
=== "Alpine"
```
echo "http://nl.alpinelinux.org/alpine/latest-stable/community" >> /etc/apk/repositories
apk update
apk add imagemagick ffmpeg exiftool
```
=== "Debian/Ubuntu"
```
apt install imagemagick ffmpeg libimage-exiftool-perl
``` ```
## Setup ## Setup
@ -82,6 +102,8 @@ It is encouraged to check [Optimizing your PostgreSQL performance](../configurat
If you are using PostgreSQL 12 or higher, add this to your Ecto database configuration If you are using PostgreSQL 12 or higher, add this to your Ecto database configuration
```elixir ```elixir
#
config :pleroma, Pleroma.Repo,
prepare: :named, prepare: :named,
parameters: [ parameters: [
plan_cache_mode: "force_custom_plan" plan_cache_mode: "force_custom_plan"
@ -127,6 +149,9 @@ chown -R pleroma /etc/pleroma
# Run the config generator # Run the config generator
su pleroma -s $SHELL -lc "./bin/pleroma_ctl instance gen --output /etc/pleroma/config.exs --output-psql /tmp/setup_db.psql" su pleroma -s $SHELL -lc "./bin/pleroma_ctl instance gen --output /etc/pleroma/config.exs --output-psql /tmp/setup_db.psql"
# Run the environment file generator.
su pleroma -s $SHELL -lc "./bin/pleroma_ctl release_env gen"
# Create the postgres database # Create the postgres database
su postgres -s $SHELL -lc "psql -f /tmp/setup_db.psql" su postgres -s $SHELL -lc "psql -f /tmp/setup_db.psql"
@ -137,7 +162,7 @@ su pleroma -s $SHELL -lc "./bin/pleroma_ctl migrate"
# su pleroma -s $SHELL -lc "./bin/pleroma_ctl migrate --migrations-path priv/repo/optional_migrations/rum_indexing/" # su pleroma -s $SHELL -lc "./bin/pleroma_ctl migrate --migrations-path priv/repo/optional_migrations/rum_indexing/"
# Start the instance to verify that everything is working as expected # Start the instance to verify that everything is working as expected
su pleroma -s $SHELL -lc "./bin/pleroma daemon" su pleroma -s $SHELL -lc "export $(cat /opt/pleroma/config/pleroma.env); ./bin/pleroma daemon"
# Wait for about 20 seconds and query the instance endpoint, if it shows your uri, name and email correctly, you are configured correctly # Wait for about 20 seconds and query the instance endpoint, if it shows your uri, name and email correctly, you are configured correctly
sleep 20 && curl http://localhost:4000/api/v1/instance sleep 20 && curl http://localhost:4000/api/v1/instance
@ -289,4 +314,3 @@ This will create an account withe the username of 'joeuser' with the email addre
## Questions ## Questions
Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**. Questions about the installation or didn’t it work as it should be, ask in [#pleroma:matrix.org](https://matrix.heldscal.la/#/room/#freenode_#pleroma:matrix.org) or IRC Channel **#pleroma** on **Freenode**.

1
installation/init.d/pleroma
View file

@ -8,6 +8,7 @@ pidfile="/var/run/pleroma.pid"
directory=/opt/pleroma directory=/opt/pleroma
healthcheck_delay=60 healthcheck_delay=60
healthcheck_timer=30 healthcheck_timer=30
export $(cat /opt/pleroma/config/pleroma.env)
: ${pleroma_port:-4000} : ${pleroma_port:-4000}

23
installation/pleroma.nginx
View file

@ -9,6 +9,12 @@
proxy_cache_path /tmp/pleroma-media-cache levels=1:2 keys_zone=pleroma_media_cache:10m max_size=10g proxy_cache_path /tmp/pleroma-media-cache levels=1:2 keys_zone=pleroma_media_cache:10m max_size=10g
inactive=720m use_temp_path=off; inactive=720m use_temp_path=off;
# this is explicitly IPv4 since Pleroma.Web.Endpoint binds on IPv4 only
# and `localhost.` resolves to [::0] on some systems: see issue #930
upstream phoenix {
server 127.0.0.1:4000 max_fails=5 fail_timeout=60s;
}
server { server {
server_name example.tld; server_name example.tld;
@ -63,19 +69,16 @@ server {
# the nginx default is 1m, not enough for large media uploads # the nginx default is 1m, not enough for large media uploads
client_max_body_size 16m; client_max_body_size 16m;
ignore_invalid_headers off;
location / {
proxy_http_version 1.1; proxy_http_version 1.1;
proxy_set_header Upgrade $http_upgrade; proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade"; proxy_set_header Connection "upgrade";
proxy_set_header Host $http_host; proxy_set_header Host $http_host;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
# this is explicitly IPv4 since Pleroma.Web.Endpoint binds on IPv4 only location / {
# and `localhost.` resolves to [::0] on some systems: see issue #930 proxy_pass http://phoenix;
proxy_pass http://127.0.0.1:4000;
client_max_body_size 16m;
} }
location ~ ^/(media|proxy) { location ~ ^/(media|proxy) {
@ -83,12 +86,16 @@ server {
slice 1m; slice 1m;
proxy_cache_key $host$uri$is_args$args$slice_range; proxy_cache_key $host$uri$is_args$args$slice_range;
proxy_set_header Range $slice_range; proxy_set_header Range $slice_range;
proxy_http_version 1.1;
proxy_cache_valid 200 206 301 304 1h; proxy_cache_valid 200 206 301 304 1h;
proxy_cache_lock on; proxy_cache_lock on;
proxy_ignore_client_abort on; proxy_ignore_client_abort on;
proxy_buffering on; proxy_buffering on;
chunked_transfer_encoding on; chunked_transfer_encoding on;
proxy_pass http://127.0.0.1:4000; proxy_pass http://phoenix;
}
location /api/fedsocket/v1 {
proxy_request_buffering off;
proxy_pass http://phoenix/api/fedsocket/v1;
} }
} }

4
installation/pleroma.service
View file

@ -17,6 +17,8 @@ Environment="MIX_ENV=prod"
Environment="HOME=/var/lib/pleroma" Environment="HOME=/var/lib/pleroma"
; Path to the folder containing the Pleroma installation. ; Path to the folder containing the Pleroma installation.
WorkingDirectory=/opt/pleroma WorkingDirectory=/opt/pleroma
; Path to the environment file. the file contains RELEASE_COOKIE and etc
EnvironmentFile=/opt/pleroma/config/pleroma.env
; Path to the Mix binary. ; Path to the Mix binary.
ExecStart=/usr/bin/mix phx.server ExecStart=/usr/bin/mix phx.server
@ -29,8 +31,6 @@ ProtectHome=true
ProtectSystem=full ProtectSystem=full
; Sets up a new /dev mount for the process and only adds API pseudo devices like /dev/null, /dev/zero or /dev/random but not physical devices. Disabled by default because it may not work on devices like the Raspberry Pi. ; Sets up a new /dev mount for the process and only adds API pseudo devices like /dev/null, /dev/zero or /dev/random but not physical devices. Disabled by default because it may not work on devices like the Raspberry Pi.
PrivateDevices=false PrivateDevices=false
; Ensures that the service process and all its children can never gain new privileges through execve().
NoNewPrivileges=true
; Drops the sysadmin capability from the daemon. ; Drops the sysadmin capability from the daemon.
CapabilityBoundingSet=~CAP_SYS_ADMIN CapabilityBoundingSet=~CAP_SYS_ADMIN

6
installation/pleroma.vcl
View file

@ -1,3 +1,4 @@
# Recommended varnishncsa logging format: '%h %l %u %t "%m %{X-Forwarded-Proto}i://%{Host}i%U%q %H" %s %b "%{Referer}i" "%{User-agent}i"'
vcl 4.1; vcl 4.1;
import std; import std;
@ -14,8 +15,11 @@ acl purge {
sub vcl_recv { sub vcl_recv {
# Redirect HTTP to HTTPS # Redirect HTTP to HTTPS
if (std.port(server.ip) != 443) { if (std.port(server.ip) != 443) {
set req.http.X-Forwarded-Proto = "http";
set req.http.x-redir = "https://" + req.http.host + req.url; set req.http.x-redir = "https://" + req.http.host + req.url;
return (synth(750, "")); return (synth(750, ""));
} else {
set req.http.X-Forwarded-Proto = "https";
} }
# CHUNKED SUPPORT # CHUNKED SUPPORT
@ -105,7 +109,7 @@ sub vcl_hash {
sub vcl_backend_fetch { sub vcl_backend_fetch {
# Be more lenient for slow servers on the fediverse # Be more lenient for slow servers on the fediverse
if bereq.url ~ "^/proxy/" { if (bereq.url ~ "^/proxy/") {
set bereq.first_byte_timeout = 300s; set bereq.first_byte_timeout = 300s;
} }

10
lib/mix/tasks/pleroma/config.ex
View file

@ -32,7 +32,8 @@ def run(["migrate_from_db" | options]) do
@spec migrate_to_db(Path.t() | nil) :: any() @spec migrate_to_db(Path.t() | nil) :: any()
def migrate_to_db(file_path \\ nil) do def migrate_to_db(file_path \\ nil) do
if Pleroma.Config.get([:configurable_from_database]) do with true <- Pleroma.Config.get([:configurable_from_database]),
:ok <- Pleroma.Config.DeprecationWarnings.warn() do
config_file = config_file =
if file_path do if file_path do
file_path file_path
@ -46,7 +47,8 @@ def migrate_to_db(file_path \\ nil) do
do_migrate_to_db(config_file) do_migrate_to_db(config_file)
else else
migration_error() :error -> deprecation_error()
_ -> migration_error()
end end
end end
@ -120,6 +122,10 @@ defp migration_error do
) )
end end
defp deprecation_error do
shell_error("Migration is not allowed until all deprecation warnings have been resolved.")
end
if Code.ensure_loaded?(Config.Reader) do if Code.ensure_loaded?(Config.Reader) do
defp config_header, do: "import Config\r\n\r\n" defp config_header, do: "import Config\r\n\r\n"
defp read_file(config_file), do: Config.Reader.read_imports!(config_file) defp read_file(config_file), do: Config.Reader.read_imports!(config_file)

4
lib/mix/tasks/pleroma/count_statuses.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Mix.Tasks.Pleroma.CountStatuses do defmodule Mix.Tasks.Pleroma.CountStatuses do
@shortdoc "Re-counts statuses for all users" @shortdoc "Re-counts statuses for all users"

21
lib/mix/tasks/pleroma/database.ex
View file

@ -99,7 +99,7 @@ def run(["fix_likes_collections"]) do
where: fragment("(?)->>'likes' is not null", object.data), where: fragment("(?)->>'likes' is not null", object.data),
select: %{id: object.id, likes: fragment("(?)->>'likes'", object.data)} select: %{id: object.id, likes: fragment("(?)->>'likes'", object.data)}
) )
|> Pleroma.RepoStreamer.chunk_stream(100) |> Pleroma.Repo.chunk_stream(100, :batches)
|> Stream.each(fn objects -> |> Stream.each(fn objects ->
ids = ids =
objects objects
@ -133,8 +133,7 @@ def run(["ensure_expiration"]) do
days = Pleroma.Config.get([:mrf_activity_expiration, :days], 365) days = Pleroma.Config.get([:mrf_activity_expiration, :days], 365)
Pleroma.Activity Pleroma.Activity
|> join(:left, [a], u in assoc(a, :expiration)) |> join(:inner, [a], o in Object,
|> join(:inner, [a, _u], o in Object,
on: on:
fragment( fragment(
"(?->>'id') = COALESCE((?)->'object'->> 'id', (?)->>'object')", "(?->>'id') = COALESCE((?)->'object'->> 'id', (?)->>'object')",
@ -144,14 +143,20 @@ def run(["ensure_expiration"]) do
) )
) )
|> where(local: true) |> where(local: true)
|> where([a, u], is_nil(u))
|> where([a], fragment("(? ->> 'type'::text) = 'Create'", a.data)) |> where([a], fragment("(? ->> 'type'::text) = 'Create'", a.data))
|> where([_a, _u, o], fragment("?->>'type' = 'Note'", o.data)) |> where([_a, o], fragment("?->>'type' = 'Note'", o.data))
|> Pleroma.RepoStreamer.chunk_stream(100) |> Pleroma.Repo.chunk_stream(100, :batches)
|> Stream.each(fn activities -> |> Stream.each(fn activities ->
Enum.each(activities, fn activity -> Enum.each(activities, fn activity ->
expires_at = Timex.shift(activity.inserted_at, days: days) expires_at =
Pleroma.ActivityExpiration.create(activity, expires_at, false) activity.inserted_at
|> DateTime.from_naive!("Etc/UTC")
|> Timex.shift(days: days)
Pleroma.Workers.PurgeExpiredActivity.enqueue(%{
activity_id: activity.id,
expires_at: expires_at
})
end) end)
end) end)
|> Stream.run() |> Stream.run()

4
lib/mix/tasks/pleroma/digest.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Mix.Tasks.Pleroma.Digest do defmodule Mix.Tasks.Pleroma.Digest do
use Mix.Task use Mix.Task
import Mix.Pleroma import Mix.Pleroma

4
lib/mix/tasks/pleroma/docs.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Mix.Tasks.Pleroma.Docs do defmodule Mix.Tasks.Pleroma.Docs do
use Mix.Task use Mix.Task
import Mix.Pleroma import Mix.Pleroma

0
lib/mix/tasks/pleroma/ecto/ecto.ex → lib/mix/tasks/pleroma/ecto.ex
View file

24
lib/mix/tasks/pleroma/email.ex
View file

@ -1,12 +1,16 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Mix.Tasks.Pleroma.Email do defmodule Mix.Tasks.Pleroma.Email do
use Mix.Task use Mix.Task
import Mix.Pleroma import Mix.Pleroma
@shortdoc "Simple Email test" @shortdoc "Email administrative tasks"
@moduledoc File.read!("docs/administration/CLI_tasks/email.md") @moduledoc File.read!("docs/administration/CLI_tasks/email.md")
def run(["test" | args]) do def run(["test" | args]) do
Mix.Pleroma.start_pleroma() start_pleroma()
{options, [], []} = {options, [], []} =
OptionParser.parse( OptionParser.parse(
@ -21,4 +25,20 @@ def run(["test" | args]) do
shell_info("Test email has been sent to #{inspect(email.to)} from #{inspect(email.from)}") shell_info("Test email has been sent to #{inspect(email.to)} from #{inspect(email.from)}")
end end
def run(["resend_confirmation_emails"]) do
start_pleroma()
shell_info("Sending emails to all unconfirmed users")
Pleroma.User.Query.build(%{
local: true,
deactivated: false,
confirmation_pending: true,
invisible: false
})
|> Pleroma.Repo.chunk_stream(500)
|> Stream.each(&Pleroma.User.try_send_confirmation_email(&1))
|> Stream.run()
end
end end

12
lib/mix/tasks/pleroma/emoji.ex
View file

@ -183,7 +183,7 @@ def run(["gen-pack" | args]) do
IO.puts("Downloading the pack and generating SHA256") IO.puts("Downloading the pack and generating SHA256")
binary_archive = Tesla.get!(client(), src).body {:ok, %{body: binary_archive}} = Pleroma.HTTP.get(src)
archive_sha = :crypto.hash(:sha256, binary_archive) |> Base.encode16() archive_sha = :crypto.hash(:sha256, binary_archive) |> Base.encode16()
IO.puts("SHA256 is #{archive_sha}") IO.puts("SHA256 is #{archive_sha}")
@ -252,7 +252,7 @@ defp fetch_and_decode!(from) do
end end
defp fetch("http" <> _ = from) do defp fetch("http" <> _ = from) do
with {:ok, %{body: body}} <- Tesla.get(client(), from) do with {:ok, %{body: body}} <- Pleroma.HTTP.get(from) do
{:ok, body} {:ok, body}
end end
end end
@ -271,13 +271,5 @@ defp parse_global_opts(args) do
) )
end end
defp client do
middleware = [
{Tesla.Middleware.FollowRedirects, [max_redirects: 3]}
]
Tesla.client(middleware)
end
defp default_manifest, do: Pleroma.Config.get!([:emoji, :default_manifest]) defp default_manifest, do: Pleroma.Config.get!([:emoji, :default_manifest])
end end

84
lib/mix/tasks/pleroma/instance.ex
View file

@ -33,7 +33,12 @@ def run(["gen" | rest]) do
uploads_dir: :string, uploads_dir: :string,
static_dir: :string, static_dir: :string,
listen_ip: :string, listen_ip: :string,
listen_port: :string listen_port: :string,
strip_uploads: :string,
anonymize_uploads: :string,
dedupe_uploads: :string,
skip_release_env: :boolean,
release_env_file: :string
], ],
aliases: [ aliases: [
o: :output, o: :output,
@ -158,6 +163,30 @@ def run(["gen" | rest]) do
) )
|> Path.expand() |> Path.expand()
strip_uploads =
get_option(
options,
:strip_uploads,
"Do you want to strip location (GPS) data from uploaded images? (y/n)",
"y"
) === "y"
anonymize_uploads =
get_option(
options,
:anonymize_uploads,
"Do you want to anonymize the filenames of uploads? (y/n)",
"n"
) === "y"
dedupe_uploads =
get_option(
options,
:dedupe_uploads,
"Do you want to deduplicate uploaded files? (y/n)",
"n"
) === "y"
Config.put([:instance, :static_dir], static_dir) Config.put([:instance, :static_dir], static_dir)
secret = :crypto.strong_rand_bytes(64) |> Base.encode64() |> binary_part(0, 64) secret = :crypto.strong_rand_bytes(64) |> Base.encode64() |> binary_part(0, 64)
@ -188,7 +217,13 @@ def run(["gen" | rest]) do
uploads_dir: uploads_dir, uploads_dir: uploads_dir,
rum_enabled: rum_enabled, rum_enabled: rum_enabled,
listen_ip: listen_ip, listen_ip: listen_ip,
listen_port: listen_port listen_port: listen_port,
upload_filters:
upload_filters(%{
strip: strip_uploads,
anonymize: anonymize_uploads,
dedupe: dedupe_uploads
})
) )
result_psql = result_psql =
@ -208,6 +243,24 @@ def run(["gen" | rest]) do
write_robots_txt(static_dir, indexable, template_dir) write_robots_txt(static_dir, indexable, template_dir)
if Keyword.get(options, :skip_release_env, false) do
shell_info("""
Release environment file is skip. Please generate the release env file before start.
`MIX_ENV=#{Mix.env()} mix pleroma.release_env gen`
""")
else
shell_info("Generation the environment file:")
release_env_args =
with path when not is_nil(path) <- Keyword.get(options, :release_env_file) do
["gen", "--path", path]
else
_ -> ["gen"]
end
Mix.Tasks.Pleroma.ReleaseEnv.run(release_env_args)
end
shell_info( shell_info(
"\n All files successfully written! Refer to the installation instructions for your platform for next steps." "\n All files successfully written! Refer to the installation instructions for your platform for next steps."
) )
@ -247,4 +300,31 @@ defp write_robots_txt(static_dir, indexable, template_dir) do
File.write(robots_txt_path, robots_txt) File.write(robots_txt_path, robots_txt)
shell_info("Writing #{robots_txt_path}.") shell_info("Writing #{robots_txt_path}.")
end end
defp upload_filters(filters) when is_map(filters) do
enabled_filters =
if filters.strip do
[Pleroma.Upload.Filter.ExifTool]
else
[]
end
enabled_filters =
if filters.anonymize do
enabled_filters ++ [Pleroma.Upload.Filter.AnonymizeFilename]
else
enabled_filters
end
enabled_filters =
if filters.dedupe do
enabled_filters ++ [Pleroma.Upload.Filter.Dedupe]
else
enabled_filters
end
enabled_filters
end
defp upload_filters(_), do: []
end end

4
lib/mix/tasks/pleroma/notification_settings.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Mix.Tasks.Pleroma.NotificationSettings do defmodule Mix.Tasks.Pleroma.NotificationSettings do
@shortdoc "Enable&Disable privacy option for push notifications" @shortdoc "Enable&Disable privacy option for push notifications"
@moduledoc """ @moduledoc """

13
lib/mix/tasks/pleroma/relay.ex
View file

@ -21,10 +21,19 @@ def run(["follow", target]) do
end end
end end
def run(["unfollow", target]) do def run(["unfollow", target | rest]) do
start_pleroma() start_pleroma()
with {:ok, _activity} <- Relay.unfollow(target) do {options, [], []} =
OptionParser.parse(
rest,
strict: [force: :boolean],
aliases: [f: :force]
)
force = Keyword.get(options, :force, false)
with {:ok, _activity} <- Relay.unfollow(target, %{force: force}) do
# put this task to sleep to allow the genserver to push out the messages # put this task to sleep to allow the genserver to push out the messages
:timer.sleep(500) :timer.sleep(500)
else else

76
lib/mix/tasks/pleroma/release_env.ex Normal file
View file

@ -0,0 +1,76 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Mix.Tasks.Pleroma.ReleaseEnv do
use Mix.Task
import Mix.Pleroma
@shortdoc "Generate Pleroma environment file."
@moduledoc File.read!("docs/administration/CLI_tasks/release_environments.md")
def run(["gen" | rest]) do
{options, [], []} =
OptionParser.parse(
rest,
strict: [
force: :boolean,
path: :string
],
aliases: [
p: :path,
f: :force
]
)
file_path =
get_option(
options,
:path,
"Environment file path",
"./config/pleroma.env"
)
env_path = Path.expand(file_path)
proceed? =
if File.exists?(env_path) do
get_option(
options,
:force,
"Environment file already exists. Do you want to overwrite the #{env_path} file? (y/n)",
"n"
) === "y"
else
true
end
if proceed? do
case do_generate(env_path) do
{:error, reason} ->
shell_error(
File.Error.message(%{action: "write to file", reason: reason, path: env_path})
)
_ ->
shell_info("\nThe file generated: #{env_path}.\n")
shell_info("""
WARNING: before start pleroma app please make sure to make the file read-only and non-modifiable.
Example:
chmod 0444 #{file_path}
chattr +i #{file_path}
""")
end
else
shell_info("\nThe file is exist. #{env_path}.\n")
end
end
def do_generate(path) do
content = "RELEASE_COOKIE=#{Base.encode32(:crypto.strong_rand_bytes(32))}"
File.mkdir_p!(Path.dirname(path))
File.write(path, content)
end
end

0
lib/mix/tasks/pleroma/robotstxt.ex → lib/mix/tasks/pleroma/robots_txt.ex
View file

72
lib/mix/tasks/pleroma/user.ex
View file

@ -179,7 +179,7 @@ def run(["deactivate_all_from_instance", instance]) do
start_pleroma() start_pleroma()
Pleroma.User.Query.build(%{nickname: "@#{instance}"}) Pleroma.User.Query.build(%{nickname: "@#{instance}"})
|> Pleroma.RepoStreamer.chunk_stream(500) |> Pleroma.Repo.chunk_stream(500, :batches)
|> Stream.each(fn users -> |> Stream.each(fn users ->
users users
|> Enum.each(fn user -> |> Enum.each(fn user ->
@ -196,17 +196,24 @@ def run(["set", nickname | rest]) do
OptionParser.parse( OptionParser.parse(
rest, rest,
strict: [ strict: [
moderator: :boolean,
admin: :boolean, admin: :boolean,
locked: :boolean confirmed: :boolean,
locked: :boolean,
moderator: :boolean
] ]
) )
with %User{local: true} = user <- User.get_cached_by_nickname(nickname) do with %User{local: true} = user <- User.get_cached_by_nickname(nickname) do
user = user =
case Keyword.get(options, :moderator) do case Keyword.get(options, :admin) do
nil -> user nil -> user
value -> set_moderator(user, value) value -> set_admin(user, value)
end
user =
case Keyword.get(options, :confirmed) do
nil -> user
value -> set_confirmed(user, value)
end end
user = user =
@ -216,9 +223,9 @@ def run(["set", nickname | rest]) do
end end
_user = _user =
case Keyword.get(options, :admin) do case Keyword.get(options, :moderator) do
nil -> user nil -> user
value -> set_admin(user, value) value -> set_moderator(user, value)
end end
else else
_ -> _ ->
@ -353,6 +360,42 @@ def run(["toggle_confirmed", nickname]) do
end end
end end
def run(["confirm_all"]) do
start_pleroma()
Pleroma.User.Query.build(%{
local: true,
deactivated: false,
is_moderator: false,
is_admin: false,
invisible: false
})
|> Pleroma.Repo.chunk_stream(500, :batches)
|> Stream.each(fn users ->
users
|> Enum.each(fn user -> User.need_confirmation(user, false) end)
end)
|> Stream.run()
end
def run(["unconfirm_all"]) do
start_pleroma()
Pleroma.User.Query.build(%{
local: true,
deactivated: false,
is_moderator: false,
is_admin: false,
invisible: false
})
|> Pleroma.Repo.chunk_stream(500, :batches)
|> Stream.each(fn users ->
users
|> Enum.each(fn user -> User.need_confirmation(user, true) end)
end)
|> Stream.run()
end
def run(["sign_out", nickname]) do def run(["sign_out", nickname]) do
start_pleroma() start_pleroma()
@ -370,13 +413,13 @@ def run(["list"]) do
start_pleroma() start_pleroma()
Pleroma.User.Query.build(%{local: true}) Pleroma.User.Query.build(%{local: true})
|> Pleroma.RepoStreamer.chunk_stream(500) |> Pleroma.Repo.chunk_stream(500, :batches)
|> Stream.each(fn users -> |> Stream.each(fn users ->
users users
|> Enum.each(fn user -> |> Enum.each(fn user ->
shell_info( shell_info(
"#{user.nickname} moderator: #{user.is_moderator}, admin: #{user.is_admin}, locked: #{ "#{user.nickname} moderator: #{user.is_moderator}, admin: #{user.is_admin}, locked: #{
user.locked user.is_locked
}, deactivated: #{user.deactivated}" }, deactivated: #{user.deactivated}"
) )
end) end)
@ -404,10 +447,17 @@ defp set_admin(user, value) do
defp set_locked(user, value) do defp set_locked(user, value) do
{:ok, user} = {:ok, user} =
user user
|> Changeset.change(%{locked: value}) |> Changeset.change(%{is_locked: value})
|> User.update_and_set_cache() |> User.update_and_set_cache()
shell_info("Locked status of #{user.nickname}: #{user.locked}") shell_info("Locked status of #{user.nickname}: #{user.is_locked}")
user
end
defp set_confirmed(user, value) do
{:ok, user} = User.need_confirmation(user, !value)
shell_info("Confirmation pending status of #{user.nickname}: #{user.confirmation_pending}")
user user
end end
end end

7
lib/transports.ex → lib/phoenix/transports/web_socket/raw.ex
View file

@ -31,7 +31,12 @@ def init(%Plug.Conn{method: "GET"} = conn, {endpoint, handler, transport}) do
case conn do case conn do
%{halted: false} = conn -> %{halted: false} = conn ->
case Transport.connect(endpoint, handler, transport, __MODULE__, nil, conn.params) do case handler.connect(%{
endpoint: endpoint,
transport: transport,
options: [serializer: nil],
params: conn.params
}) do
{:ok, socket} -> {:ok, socket} ->
{:ok, conn, {__MODULE__, {socket, opts}}} {:ok, conn, {__MODULE__, {socket, opts}}}

20
lib/pleroma/activity.ex
View file

@ -7,7 +7,6 @@ defmodule Pleroma.Activity do
alias Pleroma.Activity alias Pleroma.Activity
alias Pleroma.Activity.Queries alias Pleroma.Activity.Queries
alias Pleroma.ActivityExpiration
alias Pleroma.Bookmark alias Pleroma.Bookmark
alias Pleroma.Notification alias Pleroma.Notification
alias Pleroma.Object alias Pleroma.Object
@ -15,6 +14,7 @@ defmodule Pleroma.Activity do
alias Pleroma.ReportNote alias Pleroma.ReportNote
alias Pleroma.ThreadMute alias Pleroma.ThreadMute
alias Pleroma.User alias Pleroma.User
alias Pleroma.Web.ActivityPub.ActivityPub
import Ecto.Changeset import Ecto.Changeset
import Ecto.Query import Ecto.Query
@ -60,8 +60,6 @@ defmodule Pleroma.Activity do
# typical case. # typical case.
has_one(:object, Object, on_delete: :nothing, foreign_key: :id) has_one(:object, Object, on_delete: :nothing, foreign_key: :id)
has_one(:expiration, ActivityExpiration, on_delete: :delete_all)
timestamps() timestamps()
end end
@ -156,6 +154,18 @@ def get_bookmark(%Activity{} = activity, %User{} = user) do
def get_bookmark(_, _), do: nil def get_bookmark(_, _), do: nil
def get_report(activity_id) do
opts = %{
type: "Flag",
skip_preload: true,
preload_report_notes: true
}
ActivityPub.fetch_activities_query([], opts)
|> where(id: ^activity_id)
|> Repo.one()
end
def change(struct, params \\ %{}) do def change(struct, params \\ %{}) do
struct struct
|> cast(params, [:data, :recipients]) |> cast(params, [:data, :recipients])
@ -304,14 +314,14 @@ def all_by_actor_and_id(actor, status_ids) do
|> Repo.all() |> Repo.all()
end end
def follow_requests_for_actor(%Pleroma.User{ap_id: ap_id}) do def follow_requests_for_actor(%User{ap_id: ap_id}) do
ap_id ap_id
|> Queries.by_object_id() |> Queries.by_object_id()
|> Queries.by_type("Follow") |> Queries.by_type("Follow")
|> where([a], fragment("? ->> 'state' = 'pending'", a.data)) |> where([a], fragment("? ->> 'state' = 'pending'", a.data))
end end
def following_requests_for_actor(%Pleroma.User{ap_id: ap_id}) do def following_requests_for_actor(%User{ap_id: ap_id}) do
Queries.by_type("Follow") Queries.by_type("Follow")
|> where([a], fragment("?->>'state' = 'pending'", a.data)) |> where([a], fragment("?->>'state' = 'pending'", a.data))
|> where([a], a.actor == ^ap_id) |> where([a], a.actor == ^ap_id)

13
lib/pleroma/activity/ir/topics.ex
View file

@ -40,7 +40,8 @@ defp visibility_tags(object, activity) do
end end
defp item_creation_tags(tags, object, %{data: %{"type" => "Create"}} = activity) do defp item_creation_tags(tags, object, %{data: %{"type" => "Create"}} = activity) do
tags ++ hashtags_to_topics(object) ++ attachment_topics(object, activity) tags ++
remote_topics(activity) ++ hashtags_to_topics(object) ++ attachment_topics(object, activity)
end end
defp item_creation_tags(tags, _, _) do defp item_creation_tags(tags, _, _) do
@ -55,9 +56,19 @@ defp hashtags_to_topics(%{data: %{"tag" => tags}}) do
defp hashtags_to_topics(_), do: [] defp hashtags_to_topics(_), do: []
defp remote_topics(%{local: true}), do: []
defp remote_topics(%{actor: actor}) when is_binary(actor),
do: ["public:remote:" <> URI.parse(actor).host]
defp remote_topics(_), do: []
defp attachment_topics(%{data: %{"attachment" => []}}, _act), do: [] defp attachment_topics(%{data: %{"attachment" => []}}, _act), do: []
defp attachment_topics(_object, %{local: true}), do: ["public:media", "public:local:media"] defp attachment_topics(_object, %{local: true}), do: ["public:media", "public:local:media"]
defp attachment_topics(_object, %{actor: actor}) when is_binary(actor),
do: ["public:media", "public:remote:media:" <> URI.parse(actor).host]
defp attachment_topics(_object, _act), do: ["public:media"] defp attachment_topics(_object, _act), do: ["public:media"]
end end

74
lib/pleroma/activity_expiration.ex
View file

@ -1,74 +0,0 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.ActivityExpiration do
use Ecto.Schema
alias Pleroma.Activity
alias Pleroma.ActivityExpiration
alias Pleroma.Repo
import Ecto.Changeset
import Ecto.Query
@type t :: %__MODULE__{}
@min_activity_lifetime :timer.hours(1)
schema "activity_expirations" do
belongs_to(:activity, Activity, type: FlakeId.Ecto.CompatType)
field(:scheduled_at, :naive_datetime)
end
def changeset(%ActivityExpiration{} = expiration, attrs, validate_scheduled_at) do
expiration
|> cast(attrs, [:scheduled_at])
|> validate_required([:scheduled_at])
|> validate_scheduled_at(validate_scheduled_at)
end
def get_by_activity_id(activity_id) do
ActivityExpiration
|> where([exp], exp.activity_id == ^activity_id)
|> Repo.one()
end
def create(%Activity{} = activity, scheduled_at, validate_scheduled_at \\ true) do
%ActivityExpiration{activity_id: activity.id}
|> changeset(%{scheduled_at: scheduled_at}, validate_scheduled_at)
|> Repo.insert()
end
def due_expirations(offset \\ 0) do
naive_datetime =
NaiveDateTime.utc_now()
|> NaiveDateTime.add(offset, :millisecond)
ActivityExpiration
|> where([exp], exp.scheduled_at < ^naive_datetime)
|> limit(50)
|> preload(:activity)
|> Repo.all()
|> Enum.reject(fn %{activity: activity} ->
Activity.pinned_by_actor?(activity)
end)
end
def validate_scheduled_at(changeset, false), do: changeset
def validate_scheduled_at(changeset, true) do
validate_change(changeset, :scheduled_at, fn _, scheduled_at ->
if not expires_late_enough?(scheduled_at) do
[scheduled_at: "an ephemeral activity must live for at least one hour"]
else
[]
end
end)
end
def expires_late_enough?(scheduled_at) do
now = NaiveDateTime.utc_now()
diff = NaiveDateTime.diff(scheduled_at, now, :millisecond)
diff > @min_activity_lifetime
end
end

57
lib/pleroma/application.ex
View file

@ -52,11 +52,10 @@ def start(_type, _args) do
Pleroma.HTML.compile_scrubbers() Pleroma.HTML.compile_scrubbers()
Pleroma.Config.Oban.warn() Pleroma.Config.Oban.warn()
Config.DeprecationWarnings.warn() Config.DeprecationWarnings.warn()
Pleroma.Plugs.HTTPSecurityPlug.warn_if_disabled() Pleroma.Web.Plugs.HTTPSecurityPlug.warn_if_disabled()
Pleroma.ApplicationRequirements.verify!() Pleroma.ApplicationRequirements.verify!()
setup_instrumenters() setup_instrumenters()
load_custom_modules() load_custom_modules()
check_system_commands()
Pleroma.Docs.JSON.compile() Pleroma.Docs.JSON.compile()
adapter = Application.get_env(:tesla, :adapter) adapter = Application.get_env(:tesla, :adapter)
@ -89,18 +88,19 @@ def start(_type, _args) do
Pleroma.Repo, Pleroma.Repo,
Config.TransferTask, Config.TransferTask,
Pleroma.Emoji, Pleroma.Emoji,
Pleroma.Plugs.RateLimiter.Supervisor Pleroma.Web.Plugs.RateLimiter.Supervisor
] ++ ] ++
cachex_children() ++ cachex_children() ++
http_children(adapter, @env) ++ http_children(adapter, @env) ++
[ [
Pleroma.Stats, Pleroma.Stats,
Pleroma.JobQueueMonitor, Pleroma.JobQueueMonitor,
{Majic.Pool, [name: Pleroma.MajicPool, pool_size: Config.get([:majic_pool, :size], 2)]},
{Oban, Config.get(Oban)} {Oban, Config.get(Oban)}
] ++ ] ++
task_children(@env) ++ task_children(@env) ++
streamer_child(@env) ++ dont_run_in_test(@env) ++
chat_child(@env, chat_enabled?()) ++ chat_child(chat_enabled?()) ++
[ [
Pleroma.Web.Endpoint, Pleroma.Web.Endpoint,
Pleroma.Gopher.Server Pleroma.Gopher.Server
@ -151,7 +151,10 @@ defp setup_instrumenters do
Pleroma.Web.Endpoint.MetricsExporter.setup() Pleroma.Web.Endpoint.MetricsExporter.setup()
Pleroma.Web.Endpoint.PipelineInstrumenter.setup() Pleroma.Web.Endpoint.PipelineInstrumenter.setup()
Pleroma.Web.Endpoint.Instrumenter.setup()
# Note: disabled until prometheus-phx is integrated into prometheus-phoenix:
# Pleroma.Web.Endpoint.Instrumenter.setup()
PrometheusPhx.setup()
end end
defp cachex_children do defp cachex_children do
@ -165,7 +168,11 @@ defp cachex_children do
build_cachex("web_resp", limit: 2500), build_cachex("web_resp", limit: 2500),
build_cachex("emoji_packs", expiration: emoji_packs_expiration(), limit: 10), build_cachex("emoji_packs", expiration: emoji_packs_expiration(), limit: 10),
build_cachex("failed_proxy_url", limit: 2500), build_cachex("failed_proxy_url", limit: 2500),
build_cachex("banned_urls", default_ttl: :timer.hours(24 * 30), limit: 5_000) build_cachex("banned_urls", default_ttl: :timer.hours(24 * 30), limit: 5_000),
build_cachex("chat_message_id_idempotency_key",
expiration: chat_message_id_idempotency_key_expiration(),
limit: 500_000
)
] ]
end end
@ -175,6 +182,9 @@ defp emoji_packs_expiration,
defp idempotency_expiration, defp idempotency_expiration,
do: expiration(default: :timer.seconds(6 * 60 * 60), interval: :timer.seconds(60)) do: expiration(default: :timer.seconds(6 * 60 * 60), interval: :timer.seconds(60))
defp chat_message_id_idempotency_key_expiration,
do: expiration(default: :timer.minutes(2), interval: :timer.seconds(60))
defp seconds_valid_interval, defp seconds_valid_interval,
do: :timer.seconds(Config.get!([Pleroma.Captcha, :seconds_valid])) do: :timer.seconds(Config.get!([Pleroma.Captcha, :seconds_valid]))
@ -188,24 +198,28 @@ def build_cachex(type, opts),
defp chat_enabled?, do: Config.get([:chat, :enabled]) defp chat_enabled?, do: Config.get([:chat, :enabled])
defp streamer_child(env) when env in [:test, :benchmark], do: [] defp dont_run_in_test(env) when env in [:test, :benchmark], do: []
defp streamer_child(_) do defp dont_run_in_test(_) do
[ [
{Registry, {Registry,
[ [
name: Pleroma.Web.Streamer.registry(), name: Pleroma.Web.Streamer.registry(),
keys: :duplicate, keys: :duplicate,
partitions: System.schedulers_online() partitions: System.schedulers_online()
]} ]},
Pleroma.Web.FedSockets.Supervisor
] ]
end end
defp chat_child(_env, true) do defp chat_child(true) do
[Pleroma.Web.ChatChannel.ChatChannelState] [
Pleroma.Web.ChatChannel.ChatChannelState,
{Phoenix.PubSub, [name: Pleroma.PubSub, adapter: Phoenix.PubSub.PG2]}
]
end end
defp chat_child(_, _), do: [] defp chat_child(_), do: []
defp task_children(:test) do defp task_children(:test) do
[ [
@ -259,21 +273,4 @@ defp http_children(Tesla.Adapter.Gun, _) do
end end
defp http_children(_, _), do: [] defp http_children(_, _), do: []
defp check_system_commands do
filters = Config.get([Pleroma.Upload, :filters])
check_filter = fn filter, command_required ->
with true <- filter in filters,
false <- Pleroma.Utils.command_available?(command_required) do
Logger.error(
"#{filter} is specified in list of Pleroma.Upload filters, but the #{command_required} command is not found"
)
end
end
check_filter.(Pleroma.Upload.Filters.Exiftool, "exiftool")
check_filter.(Pleroma.Upload.Filters.Mogrify, "mogrify")
check_filter.(Pleroma.Upload.Filters.Mogrifun, "mogrify")
end
end end

72
lib/pleroma/application_requirements.ex
View file

@ -9,6 +9,9 @@ defmodule Pleroma.ApplicationRequirements do
defmodule VerifyError, do: defexception([:message]) defmodule VerifyError, do: defexception([:message])
alias Pleroma.Config
alias Pleroma.Helpers.MediaHelper
import Ecto.Query import Ecto.Query
require Logger require Logger
@ -16,7 +19,8 @@ defmodule VerifyError, do: defexception([:message])
@spec verify!() :: :ok | VerifyError.t() @spec verify!() :: :ok | VerifyError.t()
def verify! do def verify! do
:ok :ok
|> check_confirmation_accounts! |> check_system_commands!()
|> check_confirmation_accounts!()
|> check_migrations_applied!() |> check_migrations_applied!()
|> check_welcome_message_config!() |> check_welcome_message_config!()
|> check_rum!() |> check_rum!()
@ -48,7 +52,9 @@ def check_confirmation_accounts!(:ok) do
if Pleroma.Config.get([:instance, :account_activation_required]) && if Pleroma.Config.get([:instance, :account_activation_required]) &&
not Pleroma.Config.get([Pleroma.Emails.Mailer, :enabled]) do not Pleroma.Config.get([Pleroma.Emails.Mailer, :enabled]) do
Logger.error( Logger.error(
"Account activation enabled, but no Mailer settings enabled.\nPlease set config :pleroma, :instance, account_activation_required: false\nOtherwise setup and enable Mailer." "Account activation enabled, but no Mailer settings enabled.\n" <>
"Please set config :pleroma, :instance, account_activation_required: false\n" <>
"Otherwise setup and enable Mailer."
) )
{:error, {:error,
@ -81,7 +87,9 @@ def check_migrations_applied!(:ok) do
Enum.map(down_migrations, fn {:down, id, name} -> "- #{name} (#{id})\n" end) Enum.map(down_migrations, fn {:down, id, name} -> "- #{name} (#{id})\n" end)
Logger.error( Logger.error(
"The following migrations were not applied:\n#{down_migrations_text}If you want to start Pleroma anyway, set\nconfig :pleroma, :i_am_aware_this_may_cause_data_loss, disable_migration_check: true" "The following migrations were not applied:\n#{down_migrations_text}" <>
"If you want to start Pleroma anyway, set\n" <>
"config :pleroma, :i_am_aware_this_may_cause_data_loss, disable_migration_check: true"
) )
{:error, "Unapplied Migrations detected"} {:error, "Unapplied Migrations detected"}
@ -124,14 +132,22 @@ defp do_check_rum!(setting, migrate) do
case {setting, migrate} do case {setting, migrate} do
{true, false} -> {true, false} ->
Logger.error( Logger.error(
"Use `RUM` index is enabled, but were not applied migrations for it.\nIf you want to start Pleroma anyway, set\nconfig :pleroma, :database, rum_enabled: false\nOtherwise apply the following migrations:\n`mix ecto.migrate --migrations-path priv/repo/optional_migrations/rum_indexing/`" "Use `RUM` index is enabled, but were not applied migrations for it.\n" <>
"If you want to start Pleroma anyway, set\n" <>
"config :pleroma, :database, rum_enabled: false\n" <>
"Otherwise apply the following migrations:\n" <>
"`mix ecto.migrate --migrations-path priv/repo/optional_migrations/rum_indexing/`"
) )
{:error, "Unapplied RUM Migrations detected"} {:error, "Unapplied RUM Migrations detected"}
{false, true} -> {false, true} ->
Logger.error( Logger.error(
"Detected applied migrations to use `RUM` index, but `RUM` isn't enable in settings.\nIf you want to use `RUM`, set\nconfig :pleroma, :database, rum_enabled: true\nOtherwise roll `RUM` migrations back.\n`mix ecto.rollback --migrations-path priv/repo/optional_migrations/rum_indexing/`" "Detected applied migrations to use `RUM` index, but `RUM` isn't enable in settings.\n" <>
"If you want to use `RUM`, set\n" <>
"config :pleroma, :database, rum_enabled: true\n" <>
"Otherwise roll `RUM` migrations back.\n" <>
"`mix ecto.rollback --migrations-path priv/repo/optional_migrations/rum_indexing/`"
) )
{:error, "RUM Migrations detected"} {:error, "RUM Migrations detected"}
@ -140,4 +156,50 @@ defp do_check_rum!(setting, migrate) do
:ok :ok
end end
end end
defp check_system_commands!(:ok) do
filter_commands_statuses = [
check_filter(Pleroma.Upload.Filters.Exiftool, "exiftool"),
check_filter(Pleroma.Upload.Filters.Mogrify, "mogrify"),
check_filter(Pleroma.Upload.Filters.Mogrifun, "mogrify")
]
preview_proxy_commands_status =
if !Config.get([:media_preview_proxy, :enabled]) or
MediaHelper.missing_dependencies() == [] do
true
else
Logger.error(
"The following dependencies required by Media preview proxy " <>
"(which is currently enabled) are not installed: " <>
inspect(MediaHelper.missing_dependencies())
)
false
end
if Enum.all?([preview_proxy_commands_status | filter_commands_statuses], & &1) do
:ok
else
{:error,
"System commands missing. Check logs and see `docs/installation` for more details."}
end
end
defp check_system_commands!(result), do: result
defp check_filter(filter, command_required) do
filters = Config.get([Pleroma.Upload, :filters])
if filter in filters and not Pleroma.Utils.command_available?(command_required) do
Logger.error(
"#{filter} is specified in list of Pleroma.Upload filters, but the " <>
"#{command_required} command is not found"
)
false
else
true
end
end
end end

2
lib/pleroma/bbs/authenticator.ex
View file

@ -4,8 +4,8 @@
defmodule Pleroma.BBS.Authenticator do defmodule Pleroma.BBS.Authenticator do
use Sshd.PasswordAuthenticator use Sshd.PasswordAuthenticator
alias Pleroma.Plugs.AuthenticationPlug
alias Pleroma.User alias Pleroma.User
alias Pleroma.Web.Plugs.AuthenticationPlug
def authenticate(username, password) do def authenticate(username, password) do
username = to_string(username) username = to_string(username)

0
lib/pleroma/captcha/captcha.ex → lib/pleroma/captcha.ex
View file

2
lib/pleroma/captcha/kocaptcha.ex
View file

@ -10,7 +10,7 @@ defmodule Pleroma.Captcha.Kocaptcha do
def new do def new do
endpoint = Pleroma.Config.get!([__MODULE__, :endpoint]) endpoint = Pleroma.Config.get!([__MODULE__, :endpoint])
case Tesla.get(endpoint <> "/new") do case Pleroma.HTTP.get(endpoint <> "/new") do
{:error, _} -> {:error, _} ->
%{error: :kocaptcha_service_unavailable} %{error: :kocaptcha_service_unavailable}

0
lib/pleroma/captcha/captcha_service.ex → lib/pleroma/captcha/service.ex
View file

33
lib/pleroma/chat.ex
View file

@ -6,7 +6,9 @@ defmodule Pleroma.Chat do
use Ecto.Schema use Ecto.Schema
import Ecto.Changeset import Ecto.Changeset
import Ecto.Query
alias Pleroma.Chat
alias Pleroma.Repo alias Pleroma.Repo
alias Pleroma.User alias Pleroma.User
@ -16,6 +18,7 @@ defmodule Pleroma.Chat do
It is a helper only, to make it easy to display a list of chats with other people, ordered by last bump. The actual messages are retrieved by querying the recipients of the ChatMessages. It is a helper only, to make it easy to display a list of chats with other people, ordered by last bump. The actual messages are retrieved by querying the recipients of the ChatMessages.
""" """
@type t :: %__MODULE__{}
@primary_key {:id, FlakeId.Ecto.CompatType, autogenerate: true} @primary_key {:id, FlakeId.Ecto.CompatType, autogenerate: true}
schema "chats" do schema "chats" do
@ -39,16 +42,28 @@ def changeset(struct, params) do
|> unique_constraint(:user_id, name: :chats_user_id_recipient_index) |> unique_constraint(:user_id, name: :chats_user_id_recipient_index)
end end
@spec get_by_user_and_id(User.t(), FlakeId.Ecto.CompatType.t()) ::
{:ok, t()} | {:error, :not_found}
def get_by_user_and_id(%User{id: user_id}, id) do
from(c in __MODULE__,
where: c.id == ^id,
where: c.user_id == ^user_id
)
|> Repo.find_resource()
end
@spec get_by_id(FlakeId.Ecto.CompatType.t()) :: t() | nil
def get_by_id(id) do def get_by_id(id) do
__MODULE__ Repo.get(__MODULE__, id)
|> Repo.get(id)
end end
@spec get(FlakeId.Ecto.CompatType.t(), String.t()) :: t() | nil
def get(user_id, recipient) do def get(user_id, recipient) do
__MODULE__ Repo.get_by(__MODULE__, user_id: user_id, recipient: recipient)
|> Repo.get_by(user_id: user_id, recipient: recipient)
end end
@spec get_or_create(FlakeId.Ecto.CompatType.t(), String.t()) ::
{:ok, t()} | {:error, Ecto.Changeset.t()}
def get_or_create(user_id, recipient) do def get_or_create(user_id, recipient) do
%__MODULE__{} %__MODULE__{}
|> changeset(%{user_id: user_id, recipient: recipient}) |> changeset(%{user_id: user_id, recipient: recipient})
@ -60,6 +75,8 @@ def get_or_create(user_id, recipient) do
) )
end end
@spec bump_or_create(FlakeId.Ecto.CompatType.t(), String.t()) ::
{:ok, t()} | {:error, Ecto.Changeset.t()}
def bump_or_create(user_id, recipient) do def bump_or_create(user_id, recipient) do
%__MODULE__{} %__MODULE__{}
|> changeset(%{user_id: user_id, recipient: recipient}) |> changeset(%{user_id: user_id, recipient: recipient})
@ -69,4 +86,12 @@ def bump_or_create(user_id, recipient) do
conflict_target: [:user_id, :recipient] conflict_target: [:user_id, :recipient]
) )
end end
@spec for_user_query(FlakeId.Ecto.CompatType.t()) :: Ecto.Query.t()
def for_user_query(user_id) do
from(c in Chat,
where: c.user_id == ^user_id,
order_by: [desc: c.updated_at]
)
end
end end

99
lib/pleroma/config/deprecation_warnings.ex
View file

@ -8,7 +8,7 @@ defmodule Pleroma.Config.DeprecationWarnings do
require Logger require Logger
alias Pleroma.Config alias Pleroma.Config
@type config_namespace() :: [atom()] @type config_namespace() :: atom() | [atom()]
@type config_map() :: {config_namespace(), config_namespace(), String.t()} @type config_map() :: {config_namespace(), config_namespace(), String.t()}
@mrf_config_map [ @mrf_config_map [
@ -26,37 +26,26 @@ def check_hellthread_threshold do
!!!DEPRECATION WARNING!!! !!!DEPRECATION WARNING!!!
You are using the old configuration mechanism for the hellthread filter. Please check config.md. You are using the old configuration mechanism for the hellthread filter. Please check config.md.
""") """)
end
end
def mrf_user_allowlist do :error
config = Config.get(:mrf_user_allowlist) else
:ok
if config && Enum.any?(config, fn {k, _} -> is_atom(k) end) do
rewritten =
Enum.reduce(Config.get(:mrf_user_allowlist), Map.new(), fn {k, v}, acc ->
Map.put(acc, to_string(k), v)
end)
Config.put(:mrf_user_allowlist, rewritten)
Logger.error("""
!!!DEPRECATION WARNING!!!
As of Pleroma 2.0.7, the `mrf_user_allowlist` setting changed of format.
Pleroma 2.1 will remove support for the old format. Please change your configuration to match this:
config :pleroma, :mrf_user_allowlist, #{inspect(rewritten, pretty: true)}
""")
end end
end end
def warn do def warn do
check_hellthread_threshold() with :ok <- check_hellthread_threshold(),
mrf_user_allowlist() :ok <- check_old_mrf_config(),
check_old_mrf_config() :ok <- check_media_proxy_whitelist_config(),
check_media_proxy_whitelist_config() :ok <- check_welcome_message_config(),
check_welcome_message_config() :ok <- check_gun_pool_options(),
check_gun_pool_options() :ok <- check_activity_expiration_config(),
:ok <- check_remote_ip_plug_name() do
:ok
else
_ ->
:error
end
end end
def check_welcome_message_config do def check_welcome_message_config do
@ -69,10 +58,14 @@ def check_welcome_message_config do
if use_old_config do if use_old_config do
Logger.error(""" Logger.error("""
!!!DEPRECATION WARNING!!! !!!DEPRECATION WARNING!!!
Your config is using the old namespace for Welcome messages configuration. You need to change to the new namespace: Your config is using the old namespace for Welcome messages configuration. You need to convert to the new namespace. e.g.,
\n* `config :pleroma, :instance, welcome_user_nickname` is now `config :pleroma, :welcome, :direct_message, :sender_nickname` \n* `config :pleroma, :instance, welcome_user_nickname` and `config :pleroma, :instance, welcome_message` are now equal to:
\n* `config :pleroma, :instance, welcome_message` is now `config :pleroma, :welcome, :direct_message, :message` \n* `config :pleroma, :welcome, direct_message: [enabled: true, sender_nickname: "NICKNAME", message: "Your welcome message"]`"
""") """)
:error
else
:ok
end end
end end
@ -100,8 +93,11 @@ def move_namespace_and_warn(config_map, warning_preface) do
end end
end) end)
if warning != "" do if warning == "" do
:ok
else
Logger.warn(warning_preface <> warning) Logger.warn(warning_preface <> warning)
:error
end end
end end
@ -114,6 +110,10 @@ def check_media_proxy_whitelist_config do
!!!DEPRECATION WARNING!!! !!!DEPRECATION WARNING!!!
Your config is using old format (only domain) for MediaProxy whitelist option. Setting should work for now, but you are advised to change format to scheme with port to prevent possible issues later. Your config is using old format (only domain) for MediaProxy whitelist option. Setting should work for now, but you are advised to change format to scheme with port to prevent possible issues later.
""") """)
:error
else
:ok
end end
end end
@ -123,7 +123,7 @@ def check_gun_pool_options do
if timeout = pool_config[:await_up_timeout] do if timeout = pool_config[:await_up_timeout] do
Logger.warn(""" Logger.warn("""
!!!DEPRECATION WARNING!!! !!!DEPRECATION WARNING!!!
Your config is using old setting name `await_up_timeout` instead of `connect_timeout`. Setting should work for now, but you are advised to change format to scheme with port to prevent possible issues later. Your config is using old setting `config :pleroma, :connections_pool, await_up_timeout`. Please change to `config :pleroma, :connections_pool, connect_timeout` to ensure compatibility with future releases.
""") """)
Config.put(:connections_pool, Keyword.put_new(pool_config, :connect_timeout, timeout)) Config.put(:connections_pool, Keyword.put_new(pool_config, :connect_timeout, timeout))
@ -156,6 +156,41 @@ def check_gun_pool_options do
Logger.warn(Enum.join([warning_preface | pool_warnings])) Logger.warn(Enum.join([warning_preface | pool_warnings]))
Config.put(:pools, updated_config) Config.put(:pools, updated_config)
:error
else
:ok
end end
end end
@spec check_activity_expiration_config() :: :ok | nil
def check_activity_expiration_config do
warning_preface = """
!!!DEPRECATION WARNING!!!
Your config is using old namespace for activity expiration configuration. Setting should work for now, but you are advised to change to new namespace to prevent possible issues later:
"""
move_namespace_and_warn(
[
{Pleroma.ActivityExpiration, Pleroma.Workers.PurgeExpiredActivity,
"\n* `config :pleroma, Pleroma.ActivityExpiration` is now `config :pleroma, Pleroma.Workers.PurgeExpiredActivity`"}
],
warning_preface
)
end
@spec check_remote_ip_plug_name() :: :ok | nil
def check_remote_ip_plug_name do
warning_preface = """
!!!DEPRECATION WARNING!!!
Your config is using old namespace for RemoteIp Plug. Setting should work for now, but you are advised to change to new namespace to prevent possible issues later:
"""
move_namespace_and_warn(
[
{Pleroma.Plugs.RemoteIp, Pleroma.Web.Plugs.RemoteIp,
"\n* `config :pleroma, Pleroma.Plugs.RemoteIp` is now `config :pleroma, Pleroma.Web.Plugs.RemoteIp`"}
],
warning_preface
)
end
end end

10
lib/pleroma/config/oban.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Config.Oban do defmodule Pleroma.Config.Oban do
require Logger require Logger
@ -5,7 +9,11 @@ def warn do
oban_config = Pleroma.Config.get(Oban) oban_config = Pleroma.Config.get(Oban)
crontab = crontab =
[Pleroma.Workers.Cron.StatsWorker] [
Pleroma.Workers.Cron.StatsWorker,
Pleroma.Workers.Cron.PurgeExpiredActivitiesWorker,
Pleroma.Workers.Cron.ClearOauthTokenWorker
]
|> Enum.reduce(oban_config[:crontab], fn removed_worker, acc -> |> Enum.reduce(oban_config[:crontab], fn removed_worker, acc ->
with acc when is_list(acc) <- acc, with acc when is_list(acc) <- acc,
setting when is_tuple(setting) <- setting when is_tuple(setting) <-

0
lib/pleroma/config/config_db.ex → lib/pleroma/config_db.ex
View file

6
lib/pleroma/conversation.ex
View file

@ -43,7 +43,7 @@ def get_for_ap_id(ap_id) do
def maybe_create_recipientships(participation, activity) do def maybe_create_recipientships(participation, activity) do
participation = Repo.preload(participation, :recipients) participation = Repo.preload(participation, :recipients)
if participation.recipients |> Enum.empty?() do if Enum.empty?(participation.recipients) do
recipients = User.get_all_by_ap_id(activity.recipients) recipients = User.get_all_by_ap_id(activity.recipients)
RecipientShip.create(recipients, participation) RecipientShip.create(recipients, participation)
end end
@ -69,10 +69,6 @@ def create_or_bump_for(activity, opts \\ []) do
Enum.map(users, fn user -> Enum.map(users, fn user ->
invisible_conversation = Enum.any?(users, &User.blocks?(user, &1)) invisible_conversation = Enum.any?(users, &User.blocks?(user, &1))
unless invisible_conversation do
User.increment_unread_conversation_count(conversation, user)
end
opts = Keyword.put(opts, :invisible_conversation, invisible_conversation) opts = Keyword.put(opts, :invisible_conversation, invisible_conversation)
{:ok, participation} = {:ok, participation} =

27
lib/pleroma/conversation/participation.ex
View file

@ -63,21 +63,10 @@ def mark_as_read(%User{} = user, %Conversation{} = conversation) do
end end
end end
def mark_as_read(participation) do def mark_as_read(%__MODULE__{} = participation) do
__MODULE__ participation
|> where(id: ^participation.id) |> change(read: true)
|> update(set: [read: true]) |> Repo.update()
|> select([p], p)
|> Repo.update_all([])
|> case do
{1, [participation]} ->
participation = Repo.preload(participation, :user)
User.set_unread_conversation_count(participation.user)
{:ok, participation}
error ->
error
end
end end
def mark_all_as_read(%User{local: true} = user, %User{} = target_user) do def mark_all_as_read(%User{local: true} = user, %User{} = target_user) do
@ -93,7 +82,6 @@ def mark_all_as_read(%User{local: true} = user, %User{} = target_user) do
|> update([p], set: [read: true]) |> update([p], set: [read: true])
|> Repo.update_all([]) |> Repo.update_all([])
{:ok, user} = User.set_unread_conversation_count(user)
{:ok, user, []} {:ok, user, []}
end end
@ -108,7 +96,6 @@ def mark_all_as_read(%User{} = user) do
|> select([p], p) |> select([p], p)
|> Repo.update_all([]) |> Repo.update_all([])
{:ok, user} = User.set_unread_conversation_count(user)
{:ok, user, participations} {:ok, user, participations}
end end
@ -220,6 +207,12 @@ def set_recipients(participation, user_ids) do
{:ok, Repo.preload(participation, :recipients, force: true)} {:ok, Repo.preload(participation, :recipients, force: true)}
end end
@spec unread_count(User.t()) :: integer()
def unread_count(%User{id: user_id}) do
from(q in __MODULE__, where: q.user_id == ^user_id and q.read == false)
|> Repo.aggregate(:count, :id)
end
def unread_conversation_count_for_user(user) do def unread_conversation_count_for_user(user) do
from(p in __MODULE__, from(p in __MODULE__,
where: p.user_id == ^user.id, where: p.user_id == ^user.id,

0
lib/pleroma/conversation/participation_recipient_ship.ex → lib/pleroma/conversation/participation/recipient_ship.ex
View file

4
lib/pleroma/docs/generator.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Docs.Generator do defmodule Pleroma.Docs.Generator do
@callback process(keyword()) :: {:ok, String.t()} @callback process(keyword()) :: {:ok, String.t()}

4
lib/pleroma/docs/json.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Docs.JSON do defmodule Pleroma.Docs.JSON do
@behaviour Pleroma.Docs.Generator @behaviour Pleroma.Docs.Generator
@external_resource "config/description.exs" @external_resource "config/description.exs"

4
lib/pleroma/docs/markdown.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Docs.Markdown do defmodule Pleroma.Docs.Markdown do
@behaviour Pleroma.Docs.Generator @behaviour Pleroma.Docs.Generator

2
lib/pleroma/emails/admin_email.ex
View file

@ -88,7 +88,7 @@ def new_unapproved_registration(to, account) do
html_body = """ html_body = """
<p>New account for review: <a href="#{user_url(account)}">@#{account.nickname}</a></p> <p>New account for review: <a href="#{user_url(account)}">@#{account.nickname}</a></p>
<blockquote>#{HTML.strip_tags(account.registration_reason)}</blockquote> <blockquote>#{HTML.strip_tags(account.registration_reason)}</blockquote>
<a href="#{Pleroma.Web.base_url()}/pleroma/admin">Visit AdminFE</a> <a href="#{Pleroma.Web.base_url()}/pleroma/admin/#/users/#{account.id}/">Visit AdminFE</a>
""" """
new() new()

5
lib/pleroma/emails/mailer.ex
View file

@ -35,6 +35,11 @@ def perform(:deliver_async, email, config), do: deliver(email, config)
def deliver(email, config \\ []) def deliver(email, config \\ [])
def deliver(email, config) do def deliver(email, config) do
# temporary hackney fix until hackney max_connections bug is fixed
# https://git.pleroma.social/pleroma/pleroma/-/issues/2101
email =
Swoosh.Email.put_private(email, :hackney_options, ssl_options: [versions: [:"tlsv1.2"]])
case enabled?() do case enabled?() do
true -> Swoosh.Mailer.deliver(email, parse_config(config)) true -> Swoosh.Mailer.deliver(email, parse_config(config))
false -> {:error, :deliveries_disabled} false -> {:error, :deliveries_disabled}

26
lib/pleroma/emails/user_email.ex
View file

@ -189,4 +189,30 @@ def unsubscribe_url(user, notifications_type) do
Router.Helpers.subscription_url(Endpoint, :unsubscribe, token) Router.Helpers.subscription_url(Endpoint, :unsubscribe, token)
end end
def backup_is_ready_email(backup, admin_user_id \\ nil) do
%{user: user} = Pleroma.Repo.preload(backup, :user)
download_url = Pleroma.Web.PleromaAPI.BackupView.download_url(backup)
html_body =
if is_nil(admin_user_id) do
"""
<p>You requested a full backup of your Pleroma account. It's ready for download:</p>
<p><a href="#{download_url}">#{download_url}</a></p>
"""
else
admin = Pleroma.Repo.get(User, admin_user_id)
"""
<p>Admin @#{admin.nickname} requested a full backup of your Pleroma account. It's ready for download:</p>
<p><a href="#{download_url}">#{download_url}</a></p>
"""
end
new()
|> to(recipient(user))
|> from(sender())
|> subject("Your account archive is ready")
|> html_body(html_body)
end
end end

3
lib/pleroma/emoji.ex
View file

@ -56,6 +56,9 @@ def get(name) do
end end
end end
@spec exist?(String.t()) :: boolean()
def exist?(name), do: not is_nil(get(name))
@doc "Returns all the emojos!!" @doc "Returns all the emojos!!"
@spec get_all() :: list({String.t(), String.t(), String.t()}) @spec get_all() :: list({String.t(), String.t(), String.t()})
def get_all do def get_all do

144
lib/pleroma/emoji/pack.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Emoji.Pack do defmodule Pleroma.Emoji.Pack do
@derive {Jason.Encoder, only: [:files, :pack, :files_count]} @derive {Jason.Encoder, only: [:files, :pack, :files_count]}
defstruct files: %{}, defstruct files: %{},
@ -17,6 +21,7 @@ defmodule Pleroma.Emoji.Pack do
} }
alias Pleroma.Emoji alias Pleroma.Emoji
alias Pleroma.Emoji.Pack
@spec create(String.t()) :: {:ok, t()} | {:error, File.posix()} | {:error, :empty_values} @spec create(String.t()) :: {:ok, t()} | {:error, File.posix()} | {:error, :empty_values}
def create(name) do def create(name) do
@ -64,24 +69,93 @@ def delete(name) do
end end
end end
@spec add_file(String.t(), String.t(), Path.t(), Plug.Upload.t() | String.t()) :: @spec unpack_zip_emojies(list(tuple())) :: list(map())
{:ok, t()} | {:error, File.posix() | atom()} defp unpack_zip_emojies(zip_files) do
def add_file(name, shortcode, filename, file) do Enum.reduce(zip_files, [], fn
with :ok <- validate_not_empty([name, shortcode, filename]), {_, path, s, _, _, _}, acc when elem(s, 2) == :regular ->
with(
filename <- Path.basename(path),
shortcode <- Path.basename(filename, Path.extname(filename)),
false <- Emoji.exist?(shortcode)
) do
[%{path: path, filename: path, shortcode: shortcode} | acc]
else
_ -> acc
end
_, acc ->
acc
end)
end
@spec add_file(t(), String.t(), Path.t(), Plug.Upload.t()) ::
{:ok, t()}
| {:error, File.posix() | atom()}
def add_file(%Pack{} = pack, _, _, %Plug.Upload{content_type: "application/zip"} = file) do
with {:ok, zip_files} <- :zip.table(to_charlist(file.path)),
[_ | _] = emojies <- unpack_zip_emojies(zip_files),
{:ok, tmp_dir} <- Pleroma.Utils.tmp_dir("emoji") do
try do
{:ok, _emoji_files} =
:zip.unzip(
to_charlist(file.path),
[{:file_list, Enum.map(emojies, & &1[:path])}, {:cwd, tmp_dir}]
)
{_, updated_pack} =
Enum.map_reduce(emojies, pack, fn item, emoji_pack ->
emoji_file = %Plug.Upload{
filename: item[:filename],
path: Path.join(tmp_dir, item[:path])
}
{:ok, updated_pack} =
do_add_file(
emoji_pack,
item[:shortcode],
to_string(item[:filename]),
emoji_file
)
{item, updated_pack}
end)
Emoji.reload()
{:ok, updated_pack}
after
File.rm_rf(tmp_dir)
end
else
{:error, _} = error ->
error
_ ->
{:ok, pack}
end
end
def add_file(%Pack{} = pack, shortcode, filename, %Plug.Upload{} = file) do
with :ok <- validate_not_empty([shortcode, filename]),
:ok <- validate_emoji_not_exists(shortcode), :ok <- validate_emoji_not_exists(shortcode),
{:ok, pack} <- load_pack(name), {:ok, updated_pack} <- do_add_file(pack, shortcode, filename, file) do
:ok <- save_file(file, pack, filename),
{:ok, updated_pack} <- pack |> put_emoji(shortcode, filename) |> save_pack() do
Emoji.reload() Emoji.reload()
{:ok, updated_pack} {:ok, updated_pack}
end end
end end
@spec delete_file(String.t(), String.t()) :: defp do_add_file(pack, shortcode, filename, file) do
with :ok <- save_file(file, pack, filename) do
pack
|> put_emoji(shortcode, filename)
|> save_pack()
end
end
@spec delete_file(t(), String.t()) ::
{:ok, t()} | {:error, File.posix() | atom()} {:ok, t()} | {:error, File.posix() | atom()}
def delete_file(name, shortcode) do def delete_file(%Pack{} = pack, shortcode) do
with :ok <- validate_not_empty([name, shortcode]), with :ok <- validate_not_empty([shortcode]),
{:ok, pack} <- load_pack(name),
:ok <- remove_file(pack, shortcode), :ok <- remove_file(pack, shortcode),
{:ok, updated_pack} <- pack |> delete_emoji(shortcode) |> save_pack() do {:ok, updated_pack} <- pack |> delete_emoji(shortcode) |> save_pack() do
Emoji.reload() Emoji.reload()
@ -89,11 +163,10 @@ def delete_file(name, shortcode) do
end end
end end
@spec update_file(String.t(), String.t(), String.t(), String.t(), boolean()) :: @spec update_file(t(), String.t(), String.t(), String.t(), boolean()) ::
{:ok, t()} | {:error, File.posix() | atom()} {:ok, t()} | {:error, File.posix() | atom()}
def update_file(name, shortcode, new_shortcode, new_filename, force) do def update_file(%Pack{} = pack, shortcode, new_shortcode, new_filename, force) do
with :ok <- validate_not_empty([name, shortcode, new_shortcode, new_filename]), with :ok <- validate_not_empty([shortcode, new_shortcode, new_filename]),
{:ok, pack} <- load_pack(name),
{:ok, filename} <- get_filename(pack, shortcode), {:ok, filename} <- get_filename(pack, shortcode),
:ok <- validate_emoji_not_exists(new_shortcode, force), :ok <- validate_emoji_not_exists(new_shortcode, force),
:ok <- rename_file(pack, filename, new_filename), :ok <- rename_file(pack, filename, new_filename),
@ -129,13 +202,13 @@ def import_from_filesystem do
end end
end end
@spec list_remote(String.t()) :: {:ok, map()} | {:error, atom()} @spec list_remote(keyword()) :: {:ok, map()} | {:error, atom()}
def list_remote(url) do def list_remote(opts) do
uri = url |> String.trim() |> URI.parse() uri = opts[:url] |> String.trim() |> URI.parse()
with :ok <- validate_shareable_packs_available(uri) do with :ok <- validate_shareable_packs_available(uri) do
uri uri
|> URI.merge("/api/pleroma/emoji/packs") |> URI.merge("/api/pleroma/emoji/packs?page=#{opts[:page]}&page_size=#{opts[:page_size]}")
|> http_get() |> http_get()
end end
end end
@ -175,7 +248,8 @@ def download(name, url, as) do
uri = url |> String.trim() |> URI.parse() uri = url |> String.trim() |> URI.parse()
with :ok <- validate_shareable_packs_available(uri), with :ok <- validate_shareable_packs_available(uri),
{:ok, remote_pack} <- uri |> URI.merge("/api/pleroma/emoji/packs/#{name}") |> http_get(), {:ok, remote_pack} <-
uri |> URI.merge("/api/pleroma/emoji/pack?name=#{name}") |> http_get(),
{:ok, %{sha: sha, url: url} = pack_info} <- fetch_pack_info(remote_pack, uri, name), {:ok, %{sha: sha, url: url} = pack_info} <- fetch_pack_info(remote_pack, uri, name),
{:ok, archive} <- download_archive(url, sha), {:ok, archive} <- download_archive(url, sha),
pack <- copy_as(remote_pack, as || name), pack <- copy_as(remote_pack, as || name),
@ -243,9 +317,10 @@ defp validate_emoji_not_exists(shortcode, force \\ false)
defp validate_emoji_not_exists(_shortcode, true), do: :ok defp validate_emoji_not_exists(_shortcode, true), do: :ok
defp validate_emoji_not_exists(shortcode, _) do defp validate_emoji_not_exists(shortcode, _) do
case Emoji.get(shortcode) do if Emoji.exist?(shortcode) do
nil -> :ok {:error, :already_exists}
_ -> {:error, :already_exists} else
:ok
end end
end end
@ -386,25 +461,18 @@ defp validate_not_empty(list) do
end end
end end
defp save_file(file, pack, filename) do defp save_file(%Plug.Upload{path: upload_path}, pack, filename) do
file_path = Path.join(pack.path, filename) file_path = Path.join(pack.path, filename)
create_subdirs(file_path) create_subdirs(file_path)
case file do with {:ok, _} <- File.copy(upload_path, file_path) do
%Plug.Upload{path: upload_path} -> :ok
# Copy the uploaded file from the temporary directory
with {:ok, _} <- File.copy(upload_path, file_path), do: :ok
url when is_binary(url) ->
# Download and write the file
file_contents = Tesla.get!(url).body
File.write(file_path, file_contents)
end end
end end
defp put_emoji(pack, shortcode, filename) do defp put_emoji(pack, shortcode, filename) do
files = Map.put(pack.files, shortcode, filename) files = Map.put(pack.files, shortcode, filename)
%{pack | files: files} %{pack | files: files, files_count: length(Map.keys(files))}
end end
defp delete_emoji(pack, shortcode) do defp delete_emoji(pack, shortcode) do
@ -460,7 +528,7 @@ defp get_filename(pack, shortcode) do
defp http_get(%URI{} = url), do: url |> to_string() |> http_get() defp http_get(%URI{} = url), do: url |> to_string() |> http_get()
defp http_get(url) do defp http_get(url) do
with {:ok, %{body: body}} <- url |> Pleroma.HTTP.get() do with {:ok, %{body: body}} <- Pleroma.HTTP.get(url, [], pool: :default) do
Jason.decode(body) Jason.decode(body)
end end
end end
@ -509,7 +577,7 @@ defp fetch_pack_info(remote_pack, uri, name) do
{:ok, {:ok,
%{ %{
sha: sha, sha: sha,
url: URI.merge(uri, "/api/pleroma/emoji/packs/#{name}/archive") |> to_string() url: URI.merge(uri, "/api/pleroma/emoji/packs/archive?name=#{name}") |> to_string()
}} }}
%{"fallback-src" => src, "fallback-src-sha256" => sha} when is_binary(src) -> %{"fallback-src" => src, "fallback-src-sha256" => sha} when is_binary(src) ->
@ -526,7 +594,7 @@ defp fetch_pack_info(remote_pack, uri, name) do
end end
defp download_archive(url, sha) do defp download_archive(url, sha) do
with {:ok, %{body: archive}} <- Tesla.get(url) do with {:ok, %{body: archive}} <- Pleroma.HTTP.get(url) do
if Base.decode16!(sha) == :crypto.hash(:sha256, archive) do if Base.decode16!(sha) == :crypto.hash(:sha256, archive) do
{:ok, archive} {:ok, archive}
else else
@ -549,7 +617,7 @@ defp fallback_sha_changed?(pack, data) do
end end
defp update_sha_and_save_metadata(pack, data) do defp update_sha_and_save_metadata(pack, data) do
with {:ok, %{body: zip}} <- Tesla.get(data[:"fallback-src"]), with {:ok, %{body: zip}} <- Pleroma.HTTP.get(data[:"fallback-src"]),
:ok <- validate_has_all_files(pack, zip) do :ok <- validate_has_all_files(pack, zip) do
fallback_sha = :sha256 |> :crypto.hash(zip) |> Base.encode16() fallback_sha = :sha256 |> :crypto.hash(zip) |> Base.encode16()

0
lib/pleroma/gun/gun.ex → lib/pleroma/gun.ex
View file

12
lib/pleroma/gun/conn.ex
View file

@ -50,10 +50,10 @@ defp do_open(uri, %{proxy: {proxy_host, proxy_port}} = opts) do
with open_opts <- Map.delete(opts, :tls_opts), with open_opts <- Map.delete(opts, :tls_opts),
{:ok, conn} <- Gun.open(proxy_host, proxy_port, open_opts), {:ok, conn} <- Gun.open(proxy_host, proxy_port, open_opts),
{:ok, _} <- Gun.await_up(conn, opts[:connect_timeout]), {:ok, protocol} <- Gun.await_up(conn, opts[:connect_timeout]),
stream <- Gun.connect(conn, connect_opts), stream <- Gun.connect(conn, connect_opts),
{:response, :fin, 200, _} <- Gun.await(conn, stream) do {:response, :fin, 200, _} <- Gun.await(conn, stream) do
{:ok, conn} {:ok, conn, protocol}
else else
error -> error ->
Logger.warn( Logger.warn(
@ -88,8 +88,8 @@ defp do_open(uri, %{proxy: {proxy_type, proxy_host, proxy_port}} = opts) do
|> Map.put(:socks_opts, socks_opts) |> Map.put(:socks_opts, socks_opts)
with {:ok, conn} <- Gun.open(proxy_host, proxy_port, opts), with {:ok, conn} <- Gun.open(proxy_host, proxy_port, opts),
{:ok, _} <- Gun.await_up(conn, opts[:connect_timeout]) do {:ok, protocol} <- Gun.await_up(conn, opts[:connect_timeout]) do
{:ok, conn} {:ok, conn, protocol}
else else
error -> error ->
Logger.warn( Logger.warn(
@ -106,8 +106,8 @@ defp do_open(%URI{host: host, port: port} = uri, opts) do
host = Pleroma.HTTP.AdapterHelper.parse_host(host) host = Pleroma.HTTP.AdapterHelper.parse_host(host)
with {:ok, conn} <- Gun.open(host, port, opts), with {:ok, conn} <- Gun.open(host, port, opts),
{:ok, _} <- Gun.await_up(conn, opts[:connect_timeout]) do {:ok, protocol} <- Gun.await_up(conn, opts[:connect_timeout]) do
{:ok, conn} {:ok, conn, protocol}
else else
error -> error ->
Logger.warn( Logger.warn(

4
lib/pleroma/gun/connection_pool.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Gun.ConnectionPool do defmodule Pleroma.Gun.ConnectionPool do
@registry __MODULE__ @registry __MODULE__

4
lib/pleroma/gun/connection_pool/reclaimer.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Gun.ConnectionPool.Reclaimer do defmodule Pleroma.Gun.ConnectionPool.Reclaimer do
use GenServer, restart: :temporary use GenServer, restart: :temporary

39
lib/pleroma/gun/connection_pool/worker.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Gun.ConnectionPool.Worker do defmodule Pleroma.Gun.ConnectionPool.Worker do
alias Pleroma.Gun alias Pleroma.Gun
use GenServer, restart: :temporary use GenServer, restart: :temporary
@ -15,7 +19,7 @@ def init([_key, _uri, _opts, _client_pid] = opts) do
@impl true @impl true
def handle_continue({:connect, [key, uri, opts, client_pid]}, _) do def handle_continue({:connect, [key, uri, opts, client_pid]}, _) do
with {:ok, conn_pid} <- Gun.Conn.open(uri, opts), with {:ok, conn_pid, protocol} <- Gun.Conn.open(uri, opts),
Process.link(conn_pid) do Process.link(conn_pid) do
time = :erlang.monotonic_time(:millisecond) time = :erlang.monotonic_time(:millisecond)
@ -27,8 +31,12 @@ def handle_continue({:connect, [key, uri, opts, client_pid]}, _) do
send(client_pid, {:conn_pid, conn_pid}) send(client_pid, {:conn_pid, conn_pid})
{:noreply, {:noreply,
%{key: key, timer: nil, client_monitors: %{client_pid => Process.monitor(client_pid)}}, %{
:hibernate} key: key,
timer: nil,
client_monitors: %{client_pid => Process.monitor(client_pid)},
protocol: protocol
}, :hibernate}
else else
err -> err ->
{:stop, {:shutdown, err}, nil} {:stop, {:shutdown, err}, nil}
@ -53,14 +61,20 @@ def handle_cast({:remove_client, client_pid}, state) do
end end
@impl true @impl true
def handle_call(:add_client, {client_pid, _}, %{key: key} = state) do def handle_call(:add_client, {client_pid, _}, %{key: key, protocol: protocol} = state) do
time = :erlang.monotonic_time(:millisecond) time = :erlang.monotonic_time(:millisecond)
{{conn_pid, _, _, _}, _} = {{conn_pid, used_by, _, _}, _} =
Registry.update_value(@registry, key, fn {conn_pid, used_by, crf, last_reference} -> Registry.update_value(@registry, key, fn {conn_pid, used_by, crf, last_reference} ->
{conn_pid, [client_pid | used_by], crf(time - last_reference, crf), time} {conn_pid, [client_pid | used_by], crf(time - last_reference, crf), time}
end) end)
:telemetry.execute(
[:pleroma, :connection_pool, :client, :add],
%{client_pid: client_pid, clients: used_by},
%{key: state.key, protocol: protocol}
)
state = state =
if state.timer != nil do if state.timer != nil do
Process.cancel_timer(state[:timer]) Process.cancel_timer(state[:timer])
@ -83,12 +97,8 @@ def handle_call(:remove_client, {client_pid, _}, %{key: key} = state) do
end) end)
{ref, state} = pop_in(state.client_monitors[client_pid]) {ref, state} = pop_in(state.client_monitors[client_pid])
# DOWN message can receive right after `remove_client` call and cause worker to terminate
state = Process.demonitor(ref, [:flush])
if is_nil(ref) do
state
else
Process.demonitor(ref)
timer = timer =
if used_by == [] do if used_by == [] do
@ -98,10 +108,7 @@ def handle_call(:remove_client, {client_pid, _}, %{key: key} = state) do
nil nil
end end
%{state | timer: timer} {:reply, :ok, %{state | timer: timer}, :hibernate}
end
{:reply, :ok, state, :hibernate}
end end
@impl true @impl true
@ -131,7 +138,7 @@ def handle_info({:gun_down, _pid, _protocol, _reason, _killed_streams}, state) d
@impl true @impl true
def handle_info({:DOWN, _ref, :process, pid, reason}, state) do def handle_info({:DOWN, _ref, :process, pid, reason}, state) do
:telemetry.execute( :telemetry.execute(
[:pleroma, :connection_pool, :client_death], [:pleroma, :connection_pool, :client, :dead],
%{client_pid: pid, reason: reason}, %{client_pid: pid, reason: reason},
%{key: state.key} %{key: state.key}
) )

4
lib/pleroma/gun/connection_pool/worker_supervisor.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Gun.ConnectionPool.WorkerSupervisor do defmodule Pleroma.Gun.ConnectionPool.WorkerSupervisor do
@moduledoc "Supervisor for pool workers. Does not do anything except enforce max connection limit" @moduledoc "Supervisor for pool workers. Does not do anything except enforce max connection limit"

19
lib/pleroma/helpers/inet_helper.ex Normal file
View file

@ -0,0 +1,19 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Helpers.InetHelper do
def parse_address(ip) when is_tuple(ip) do
{:ok, ip}
end
def parse_address(ip) when is_binary(ip) do
ip
|> String.to_charlist()
|> parse_address()
end
def parse_address(ip) do
:inet.parse_address(ip)
end
end

162
lib/pleroma/helpers/media_helper.ex Normal file
View file

@ -0,0 +1,162 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Helpers.MediaHelper do
@moduledoc """
Handles common media-related operations.
"""
alias Pleroma.HTTP
require Logger
def missing_dependencies do
Enum.reduce([imagemagick: "convert", ffmpeg: "ffmpeg"], [], fn {sym, executable}, acc ->
if Pleroma.Utils.command_available?(executable) do
acc
else
[sym | acc]
end
end)
end
def image_resize(url, options) do
with executable when is_binary(executable) <- System.find_executable("convert"),
{:ok, args} <- prepare_image_resize_args(options),
{:ok, env} <- HTTP.get(url, [], pool: :media),
{:ok, fifo_path} <- mkfifo() do
args = List.flatten([fifo_path, args])
run_fifo(fifo_path, env, executable, args)
else
nil -> {:error, {:convert, :command_not_found}}
{:error, _} = error -> error
end
end
defp prepare_image_resize_args(
%{max_width: max_width, max_height: max_height, format: "png"} = options
) do
quality = options[:quality] || 85
resize = Enum.join([max_width, "x", max_height, ">"])
args = [
"-resize",
resize,
"-quality",
to_string(quality),
"png:-"
]
{:ok, args}
end
defp prepare_image_resize_args(%{max_width: max_width, max_height: max_height} = options) do
quality = options[:quality] || 85
resize = Enum.join([max_width, "x", max_height, ">"])
args = [
"-interlace",
"Plane",
"-resize",
resize,
"-quality",
to_string(quality),
"jpg:-"
]
{:ok, args}
end
defp prepare_image_resize_args(_), do: {:error, :missing_options}
# Note: video thumbnail is intentionally not resized (always has original dimensions)
def video_framegrab(url) do
with executable when is_binary(executable) <- System.find_executable("ffmpeg"),
{:ok, env} <- HTTP.get(url, [], pool: :media),
{:ok, fifo_path} <- mkfifo(),
args = [
"-y",
"-i",
fifo_path,
"-vframes",
"1",
"-f",
"mjpeg",
"-loglevel",
"error",
"-"
] do
run_fifo(fifo_path, env, executable, args)
else
nil -> {:error, {:ffmpeg, :command_not_found}}
{:error, _} = error -> error
end
end
defp run_fifo(fifo_path, env, executable, args) do
pid =
Port.open({:spawn_executable, executable}, [
:use_stdio,
:stream,
:exit_status,
:binary,
args: args
])
fifo = Port.open(to_charlist(fifo_path), [:eof, :binary, :stream, :out])
fix = Pleroma.Helpers.QtFastStart.fix(env.body)
true = Port.command(fifo, fix)
:erlang.port_close(fifo)
loop_recv(pid)
after
File.rm(fifo_path)
end
defp mkfifo do
path = Path.join(System.tmp_dir!(), "pleroma-media-preview-pipe-#{Ecto.UUID.generate()}")
case System.cmd("mkfifo", [path]) do
{_, 0} ->
spawn(fifo_guard(path))
{:ok, path}
{_, err} ->
{:error, {:fifo_failed, err}}
end
end
defp fifo_guard(path) do
pid = self()
fn ->
ref = Process.monitor(pid)
receive do
{:DOWN, ^ref, :process, ^pid, _} ->
File.rm(path)
end
end
end
defp loop_recv(pid) do
loop_recv(pid, <<>>)
end
defp loop_recv(pid, acc) do
receive do
{^pid, {:data, data}} ->
loop_recv(pid, acc <> data)
{^pid, {:exit_status, 0}} ->
{:ok, acc}
{^pid, {:exit_status, status}} ->
{:error, status}
after
5000 ->
:erlang.port_close(pid)
{:error, :timeout}
end
end
end

131
lib/pleroma/helpers/qt_fast_start.ex Normal file
View file

@ -0,0 +1,131 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Helpers.QtFastStart do
@moduledoc """
(WIP) Converts a "slow start" (data before metadatas) mov/mp4 file to a "fast start" one (metadatas before data).
"""
# TODO: Cleanup and optimizations
# Inspirations: https://www.ffmpeg.org/doxygen/3.4/qt-faststart_8c_source.html
# https://github.com/danielgtaylor/qtfaststart/blob/master/qtfaststart/processor.py
# ISO/IEC 14496-12:2015, ISO/IEC 15444-12:2015
# Paracetamol
def fix(<<0x00, 0x00, 0x00, _, 0x66, 0x74, 0x79, 0x70, _::bits>> = binary) do
index = fix(binary, 0, nil, nil, [])
case index do
:abort -> binary
[{"ftyp", _, _, _, _}, {"mdat", _, _, _, _} | _] -> faststart(index)
[{"ftyp", _, _, _, _}, {"free", _, _, _, _}, {"mdat", _, _, _, _} | _] -> faststart(index)
_ -> binary
end
end
def fix(binary) do
binary
end
# MOOV have been seen before MDAT- abort
defp fix(<<_::bits>>, _, true, false, _) do
:abort
end
defp fix(
<<size::integer-big-size(32), fourcc::bits-size(32), rest::bits>>,
pos,
got_moov,
got_mdat,
acc
) do
full_size = (size - 8) * 8
<<data::bits-size(full_size), rest::bits>> = rest
acc = [
{fourcc, pos, pos + size, size,
<<size::integer-big-size(32), fourcc::bits-size(32), data::bits>>}
| acc
]
fix(rest, pos + size, got_moov || fourcc == "moov", got_mdat || fourcc == "mdat", acc)
end
defp fix(<<>>, _pos, _, _, acc) do
:lists.reverse(acc)
end
defp faststart(index) do
{{_ftyp, _, _, _, ftyp}, index} = List.keytake(index, "ftyp", 0)
# Skip re-writing the free fourcc as it's kind of useless.
# Why stream useless bytes when you can do without?
{free_size, index} =
case List.keytake(index, "free", 0) do
{{_, _, _, size, _}, index} -> {size, index}
_ -> {0, index}
end
{{_moov, _, _, moov_size, moov}, index} = List.keytake(index, "moov", 0)
offset = -free_size + moov_size
rest = for {_, _, _, _, data} <- index, do: data, into: []
<<moov_head::bits-size(64), moov_data::bits>> = moov
[ftyp, moov_head, fix_moov(moov_data, offset, []), rest]
end
defp fix_moov(
<<size::integer-big-size(32), fourcc::bits-size(32), rest::bits>>,
offset,
acc
) do
full_size = (size - 8) * 8
<<data::bits-size(full_size), rest::bits>> = rest
data =
cond do
fourcc in ["trak", "mdia", "minf", "stbl"] ->
# Theses contains sto or co64 part
[<<size::integer-big-size(32), fourcc::bits-size(32)>>, fix_moov(data, offset, [])]
fourcc in ["stco", "co64"] ->
# fix the damn thing
<<version::integer-big-size(32), count::integer-big-size(32), rest::bits>> = data
entry_size =
case fourcc do
"stco" -> 32
"co64" -> 64
end
[
<<size::integer-big-size(32), fourcc::bits-size(32), version::integer-big-size(32),
count::integer-big-size(32)>>,
rewrite_entries(entry_size, offset, rest, [])
]
true ->
[<<size::integer-big-size(32), fourcc::bits-size(32)>>, data]
end
acc = [acc | data]
fix_moov(rest, offset, acc)
end
defp fix_moov(<<>>, _, acc), do: acc
for size <- [32, 64] do
defp rewrite_entries(
unquote(size),
offset,
<<pos::integer-big-size(unquote(size)), rest::bits>>,
acc
) do
rewrite_entries(unquote(size), offset, rest, [
acc | <<pos + offset::integer-big-size(unquote(size))>>
])
end
end
defp rewrite_entries(_, _, <<>>, acc), do: acc
end

14
lib/pleroma/helpers/uri_helper.ex
View file

@ -3,18 +3,22 @@
# SPDX-License-Identifier: AGPL-3.0-only # SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.Helpers.UriHelper do defmodule Pleroma.Helpers.UriHelper do
def append_uri_params(uri, appended_params) do def modify_uri_params(uri, overridden_params, deleted_params \\ []) do
uri = URI.parse(uri) uri = URI.parse(uri)
appended_params = for {k, v} <- appended_params, into: %{}, do: {to_string(k), v}
existing_params = URI.query_decoder(uri.query || "") |> Enum.into(%{}) existing_params = URI.query_decoder(uri.query || "") |> Map.new()
updated_params_keys = Enum.uniq(Map.keys(existing_params) ++ Map.keys(appended_params)) overridden_params = Map.new(overridden_params, fn {k, v} -> {to_string(k), v} end)
deleted_params = Enum.map(deleted_params, &to_string/1)
updated_params = updated_params =
for k <- updated_params_keys, do: {k, appended_params[k] || existing_params[k]} existing_params
|> Map.merge(overridden_params)
|> Map.drop(deleted_params)
uri uri
|> Map.put(:query, URI.encode_query(updated_params)) |> Map.put(:query, URI.encode_query(updated_params))
|> URI.to_string() |> URI.to_string()
|> String.replace_suffix("?", "")
end end
def maybe_add_base("/" <> uri, base), do: Path.join([base, uri]) def maybe_add_base("/" <> uri, base), do: Path.join([base, uri])

0
lib/pleroma/http/http.ex → lib/pleroma/http.ex
View file

4
lib/pleroma/http/adapter_helper/default.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.HTTP.AdapterHelper.Default do defmodule Pleroma.HTTP.AdapterHelper.Default do
alias Pleroma.HTTP.AdapterHelper alias Pleroma.HTTP.AdapterHelper

4
lib/pleroma/http/adapter_helper/hackney.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.HTTP.AdapterHelper.Hackney do defmodule Pleroma.HTTP.AdapterHelper.Hackney do
@behaviour Pleroma.HTTP.AdapterHelper @behaviour Pleroma.HTTP.AdapterHelper

12
lib/pleroma/http/web_push.ex Normal file
View file

@ -0,0 +1,12 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.HTTP.WebPush do
@moduledoc false
def post(url, payload, headers) do
list_headers = Map.to_list(headers)
Pleroma.HTTP.post(url, payload, list_headers)
end
end

1
lib/pleroma/instances.ex
View file

@ -11,6 +11,7 @@ defmodule Pleroma.Instances do
defdelegate reachable?(url_or_host), to: @adapter defdelegate reachable?(url_or_host), to: @adapter
defdelegate set_reachable(url_or_host), to: @adapter defdelegate set_reachable(url_or_host), to: @adapter
defdelegate set_unreachable(url_or_host, unreachable_since \\ nil), to: @adapter defdelegate set_unreachable(url_or_host, unreachable_since \\ nil), to: @adapter
defdelegate get_consistently_unreachable(), to: @adapter
def set_consistently_unreachable(url_or_host), def set_consistently_unreachable(url_or_host),
do: set_unreachable(url_or_host, reachability_datetime_threshold()) do: set_unreachable(url_or_host, reachability_datetime_threshold())

27
lib/pleroma/instances/instance.ex
View file

@ -119,6 +119,17 @@ def set_unreachable(url_or_host, unreachable_since) when is_binary(url_or_host)
def set_unreachable(_, _), do: {:error, nil} def set_unreachable(_, _), do: {:error, nil}
def get_consistently_unreachable do
reachability_datetime_threshold = Instances.reachability_datetime_threshold()
from(i in Instance,
where: ^reachability_datetime_threshold > i.unreachable_since,
order_by: i.unreachable_since,
select: {i.host, i.unreachable_since}
)
|> Repo.all()
end
defp parse_datetime(datetime) when is_binary(datetime) do defp parse_datetime(datetime) when is_binary(datetime) do
NaiveDateTime.from_iso8601(datetime) NaiveDateTime.from_iso8601(datetime)
end end
@ -156,16 +167,12 @@ def get_or_update_favicon(%URI{host: host} = instance_uri) do
defp scrape_favicon(%URI{} = instance_uri) do defp scrape_favicon(%URI{} = instance_uri) do
try do try do
with {:ok, %Tesla.Env{body: html}} <- with {:ok, %Tesla.Env{body: html}} <-
Pleroma.HTTP.get(to_string(instance_uri), [{"accept", "text/html"}], Pleroma.HTTP.get(to_string(instance_uri), [{"accept", "text/html"}], pool: :media),
adapter: [pool: :media] {_, [favicon_rel | _]} when is_binary(favicon_rel) <-
), {:parse,
favicon_rel <- html |> Floki.parse_document!() |> Floki.attribute("link[rel=icon]", "href")},
html {_, favicon} when is_binary(favicon) <-
|> Floki.parse_document!() {:merge, URI.merge(instance_uri, favicon_rel) |> to_string()} do
|> Floki.attribute("link[rel=icon]", "href")
|> List.first(),
favicon <- URI.merge(instance_uri, favicon_rel) |> to_string(),
true <- is_binary(favicon) do
favicon favicon
else else
_ -> nil _ -> nil

4
lib/pleroma/jwt.ex
View file

@ -1,3 +1,7 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.JWT do defmodule Pleroma.JWT do
use Joken.Config use Joken.Config

71
lib/pleroma/mfa/token.ex
View file

@ -10,10 +10,11 @@ defmodule Pleroma.MFA.Token do
alias Pleroma.Repo alias Pleroma.Repo
alias Pleroma.User alias Pleroma.User
alias Pleroma.Web.OAuth.Authorization alias Pleroma.Web.OAuth.Authorization
alias Pleroma.Web.OAuth.Token, as: OAuthToken
@expires 300 @expires 300
@type t() :: %__MODULE__{}
schema "mfa_tokens" do schema "mfa_tokens" do
field(:token, :string) field(:token, :string)
field(:valid_until, :naive_datetime_usec) field(:valid_until, :naive_datetime_usec)
@ -24,6 +25,7 @@ defmodule Pleroma.MFA.Token do
timestamps() timestamps()
end end
@spec get_by_token(String.t()) :: {:ok, t()} | {:error, :not_found}
def get_by_token(token) do def get_by_token(token) do
from( from(
t in __MODULE__, t in __MODULE__,
@ -33,33 +35,40 @@ def get_by_token(token) do
|> Repo.find_resource() |> Repo.find_resource()
end end
def validate(token) do @spec validate(String.t()) :: {:ok, t()} | {:error, :not_found} | {:error, :expired_token}
with {:fetch_token, {:ok, token}} <- {:fetch_token, get_by_token(token)}, def validate(token_str) do
{:expired, false} <- {:expired, is_expired?(token)} do with {:ok, token} <- get_by_token(token_str),
false <- expired?(token) do
{:ok, token} {:ok, token}
else
{:expired, _} -> {:error, :expired_token}
{:fetch_token, _} -> {:error, :not_found}
error -> {:error, error}
end end
end end
def create_token(%User{} = user) do defp expired?(%__MODULE__{valid_until: valid_until}) do
%__MODULE__{} with true <- NaiveDateTime.diff(NaiveDateTime.utc_now(), valid_until) > 0 do
|> change {:error, :expired_token}
|> assign_user(user) end
|> put_token
|> put_valid_until
|> Repo.insert()
end end
def create_token(user, authorization) do @spec create(User.t(), Authorization.t() | nil) :: {:ok, t()} | {:error, Ecto.Changeset.t()}
def create(user, authorization \\ nil) do
with {:ok, token} <- do_create(user, authorization) do
Pleroma.Workers.PurgeExpiredToken.enqueue(%{
token_id: token.id,
valid_until: DateTime.from_naive!(token.valid_until, "Etc/UTC"),
mod: __MODULE__
})
{:ok, token}
end
end
defp do_create(user, authorization) do
%__MODULE__{} %__MODULE__{}
|> change |> change()
|> assign_user(user) |> assign_user(user)
|> assign_authorization(authorization) |> maybe_assign_authorization(authorization)
|> put_token |> put_token()
|> put_valid_until |> put_valid_until()
|> Repo.insert() |> Repo.insert()
end end
@ -69,15 +78,19 @@ defp assign_user(changeset, user) do
|> validate_required([:user]) |> validate_required([:user])
end end
defp assign_authorization(changeset, authorization) do defp maybe_assign_authorization(changeset, %Authorization{} = authorization) do
changeset changeset
|> put_assoc(:authorization, authorization) |> put_assoc(:authorization, authorization)
|> validate_required([:authorization]) |> validate_required([:authorization])
end end
defp maybe_assign_authorization(changeset, _), do: changeset
defp put_token(changeset) do defp put_token(changeset) do
token = Pleroma.Web.OAuth.Token.Utils.generate_token()
changeset changeset
|> change(%{token: OAuthToken.Utils.generate_token()}) |> change(%{token: token})
|> validate_required([:token]) |> validate_required([:token])
|> unique_constraint(:token) |> unique_constraint(:token)
end end
@ -89,18 +102,4 @@ defp put_valid_until(changeset) do
|> change(%{valid_until: expires_in}) |> change(%{valid_until: expires_in})
|> validate_required([:valid_until]) |> validate_required([:valid_until])
end end
def is_expired?(%__MODULE__{valid_until: valid_until}) do
NaiveDateTime.diff(NaiveDateTime.utc_now(), valid_until) > 0
end
def is_expired?(_), do: false
def delete_expired_tokens do
from(
q in __MODULE__,
where: fragment("?", q.valid_until) < ^Timex.now()
)
|> Repo.delete_all()
end
end end

9
lib/pleroma/migration_helper/notification_backfill.ex
View file

@ -19,13 +19,13 @@ def fill_in_notification_types do
query query
|> Repo.chunk_stream(100) |> Repo.chunk_stream(100)
|> Enum.each(fn notification -> |> Enum.each(fn notification ->
type = if notification.activity do
notification.activity type = type_from_activity(notification.activity)
|> type_from_activity()
notification notification
|> Ecto.Changeset.change(%{type: type}) |> Ecto.Changeset.change(%{type: type})
|> Repo.update() |> Repo.update()
end
end) end)
end end
@ -72,8 +72,7 @@ defp type_from_activity(%{data: %{"type" => type}} = activity) do
"pleroma:emoji_reaction" "pleroma:emoji_reaction"
"Create" -> "Create" ->
activity type_from_activity_object(activity)
|> type_from_activity_object()
t -> t ->
raise "No notification type for activity type #{t}" raise "No notification type for activity type #{t}"

120
lib/pleroma/mime.ex
View file

@ -1,120 +0,0 @@
# Pleroma: A lightweight social networking server
# Copyright © 2017-2020 Pleroma Authors <https://pleroma.social/>
# SPDX-License-Identifier: AGPL-3.0-only
defmodule Pleroma.MIME do
@moduledoc """
Returns the mime-type of a binary and optionally a normalized file-name.
"""
@default "application/octet-stream"
@read_bytes 35
@spec file_mime_type(String.t(), String.t()) ::
{:ok, content_type :: String.t(), filename :: String.t()} | {:error, any()} | :error
def file_mime_type(path, filename) do
with {:ok, content_type} <- file_mime_type(path),
filename <- fix_extension(filename, content_type) do
{:ok, content_type, filename}
end
end
@spec file_mime_type(String.t()) :: {:ok, String.t()} | {:error, any()} | :error
def file_mime_type(filename) do
File.open(filename, [:read], fn f ->
check_mime_type(IO.binread(f, @read_bytes))
end)
end
def bin_mime_type(binary, filename) do
with {:ok, content_type} <- bin_mime_type(binary),
filename <- fix_extension(filename, content_type) do
{:ok, content_type, filename}
end
end
@spec bin_mime_type(binary()) :: {:ok, String.t()} | :error
def bin_mime_type(<<head::binary-size(@read_bytes), _::binary>>) do
{:ok, check_mime_type(head)}
end
def bin_mime_type(_), do: :error
def mime_type(<<_::binary>>), do: {:ok, @default}
defp fix_extension(filename, content_type) do
parts = String.split(filename, ".")
new_filename =
if length(parts) > 1 do
Enum.drop(parts, -1) |> Enum.join(".")
else
Enum.join(parts)
end
cond do
content_type == "application/octet-stream" ->
filename
ext = List.first(MIME.extensions(content_type)) ->
new_filename <> "." <> ext
true ->
Enum.join([new_filename, String.split(content_type, "/") |> List.last()], ".")
end
end
defp check_mime_type(<<0x89, 0x50, 0x4E, 0x47, 0x0D, 0x0A, 0x1A, 0x0A, _::binary>>) do
"image/png"
end
defp check_mime_type(<<0x47, 0x49, 0x46, 0x38, _, 0x61, _::binary>>) do
"image/gif"
end
defp check_mime_type(<<0xFF, 0xD8, 0xFF, _::binary>>) do
"image/jpeg"
end
defp check_mime_type(<<0x1A, 0x45, 0xDF, 0xA3, _::binary>>) do
"video/webm"
end
defp check_mime_type(<<0x00, 0x00, 0x00, _, 0x66, 0x74, 0x79, 0x70, _::binary>>) do
"video/mp4"
end
defp check_mime_type(<<0x49, 0x44, 0x33, _::binary>>) do
"audio/mpeg"
end
defp check_mime_type(<<255, 251, _, 68, 0, 0, 0, 0, _::binary>>) do
"audio/mpeg"
end
defp check_mime_type(
<<0x4F, 0x67, 0x67, 0x53, 0x00, 0x02, 0x00, 0x00, _::size(160), 0x80, 0x74, 0x68, 0x65,
0x6F, 0x72, 0x61, _::binary>>
) do
"video/ogg"
end
defp check_mime_type(<<0x4F, 0x67, 0x67, 0x53, 0x00, 0x02, 0x00, 0x00, _::binary>>) do
"audio/ogg"
end
defp check_mime_type(<<"RIFF", _::binary-size(4), "WAVE", _::binary>>) do
"audio/wav"
end
defp check_mime_type(<<"RIFF", _::binary-size(4), "WEBP", _::binary>>) do
"image/webp"
end
defp check_mime_type(<<"RIFF", _::binary-size(4), "AVI.", _::binary>>) do
"video/avi"
end
defp check_mime_type(_) do
@default
end
end

Some files were not shown because too many files have changed in this diff Show more