Merge pull request 'clean-up docs to avoid version-mismatches in BE and FE in new installs (for stable)' (#378) from stefan230/akkoma:stable into stable

Reviewed-on: AkkomaGang/akkoma#378
This commit is contained in:
floatingghost 2022-12-19 10:59:34 +00:00
commit d9508474b6
8 changed files with 65 additions and 32 deletions

View file

@ -21,24 +21,23 @@ Currently, known `<frontend>` values are:
- [admin-fe](https://akkoma.dev/AkkomaGang/admin-fe)
- [mastodon-fe](https://akkoma.dev/AkkomaGang/masto-fe)
- [pleroma-fe](https://akkoma.dev/AkkomaGang/pleroma-fe)
- [soapbox-fe](https://gitlab.com/soapbox-pub/soapbox-fe)
You can still install frontends that are not configured, see below.
## Example installations for a known frontend
## Example installations for a known frontend (Stable-Version)
For a frontend configured under the `available` key, it's enough to install it by name.
=== "OTP"
```sh
./bin/pleroma_ctl frontend install pleroma-fe
./bin/pleroma_ctl frontend install pleroma-fe --ref stable
```
=== "From Source"
```sh
mix pleroma.frontend install pleroma-fe
mix pleroma.frontend install pleroma-fe --ref stable
```
This will download the latest build for the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`).

View file

@ -1,17 +1,36 @@
# Updating your instance
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/stable/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
Besides that, doing the following is generally enough:
## Switch to the akkoma user
```sh
# Using sudo
sudo -su akkoma
# Using doas
doas -su akkoma
# Using su
su -s "$SHELL" akkoma
```
## For OTP installations
```sh
# Download the new release
su akkoma -s $SHELL -lc "./bin/pleroma_ctl update"
# Download latest stable release
./bin/pleroma_ctl update --branch stable
# Migrate the database, you are advised to stop the instance before doing that
su akkoma -s $SHELL -lc "./bin/pleroma_ctl migrate"
# Stop akkoma
./bin/pleroma stop # or using the system service manager (e.g. systemctl stop akkoma)
# Run database migrations
./bin/pleroma_ctl migrate
# Update Pleroma-FE frontend to latest stable. For other Frontends see Frontend Configration doc for more information.
./bin/pleroma_ctl frontend install pleroma-fe --ref stable
# Start akkoma
./bin/pleroma daemon # or using the system service manager (e.g. systemctl start akkoma)
```
If you selected an alternate flavour on installation,
@ -19,13 +38,28 @@ you _may_ need to specify `--flavour`, in the same way as
[when installing](../../installation/otp_en#detecting-flavour).
## For from source installations (using git)
Run as the `akkoma` user:
1. Go to the working directory of Akkoma (default is `/opt/akkoma`)
2. Run `git pull` [^1]. This pulls the latest changes from upstream.
3. Run `mix deps.get` [^1]. This pulls in any new dependencies.
4. Stop the Akkoma service.
5. Run `mix ecto.migrate` [^1] [^2]. This task performs database migrations, if there were any.
6. Start the Akkoma service.
```sh
# Pull in new changes
git pull
[^1]: Depending on which install guide you followed (for example on Debian/Ubuntu), you want to run `git` and `mix` tasks as `akkoma` user by adding `sudo -Hu akkoma` before the command.
[^2]: Prefix with `MIX_ENV=prod` to run it using the production config file.
# Run with production configuration
export MIX_ENV=prod
# Download and compile dependencies
mix deps.get
mix compile
# Stop akkoma (replace with your system service manager's equivalent if different)
sudo systemctl stop akkoma
# Run database migrations
mix ecto.migrate
# Update Pleroma-FE frontend to latest stable. For other Frontends see Frontend Configration doc for more information.
mix pleroma.frontend install pleroma-fe --ref stable
# Start akkoma (replace with your system service manager's equivalent if different)
sudo systemctl start akkoma
```

View file

@ -84,12 +84,12 @@ doas adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma
**Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you dont have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
doas mkdir -p /opt/akkoma
doas chown -R akkoma:akkoma /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -109,7 +109,7 @@ doas -u akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
doas -u akkoma mv config/{generated_config.exs,prod.secret.exs}

View file

@ -75,12 +75,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you dont have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
sudo mkdir -p /opt/akkoma
sudo chown -R akkoma:akkoma /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -100,7 +100,7 @@ sudo -Hu akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

View file

@ -49,12 +49,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you dont have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
sudo mkdir -p /opt/akkoma
sudo chown -R akkoma:akkoma /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -74,7 +74,7 @@ sudo -Hu akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

View file

@ -74,12 +74,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you dont have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
sudo mkdir -p /opt/akkoma
sudo chown -R akkoma:akkoma /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -99,7 +99,7 @@ sudo -Hu akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

View file

@ -37,7 +37,7 @@ sudo dnf install git gcc g++ erlang elixir erlang-os_mon erlang-eldap erlang-xme
```shell
cd ~
git clone https://akkoma.dev/AkkomaGang/akkoma.git
git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable
```
* Change to the new directory:

View file

@ -12,7 +12,7 @@ Release URLs will always be of the form
https://akkoma-updates.s3-website.fr-par.scw.cloud/{branch}/akkoma-{flavour}.zip
```
Where branch is usually `stable` or `develop`, and `flavour` is
Where branch is usually `stable` and `flavour` is
the one [that you detect on install](../otp_en/#detecting-flavour).
So, for an AMD64 stable install, your update URL will be