From 3ad3a114de800ac406373693e9ae6a9bdb8b7fca Mon Sep 17 00:00:00 2001 From: norm Date: Sat, 2 Jul 2022 21:00:01 +0000 Subject: [PATCH] Update install docs (#38) Reviewed-on: https://akkoma.dev/AkkomaGang/akkoma/pulls/38 Co-authored-by: norm Co-committed-by: norm --- README.md | 1 - docs/index.md | 22 ++-- docs/installation/alpine_linux_en.md | 53 +++++----- docs/installation/arch_linux_en.md | 57 +++++----- docs/installation/debian_based_en.md | 57 +++++----- docs/installation/debian_based_jp.md | 63 +++++------ docs/installation/freebsd_en.md | 57 +++++----- docs/installation/gentoo_en.md | 79 +++++++------- .../migrating_from_source_otp_en.md | 83 ++++++++------- docs/installation/migrating_to_akkoma.md | 4 +- docs/installation/netbsd_en.md | 41 +++---- docs/installation/openbsd_en.md | 50 ++++----- docs/installation/openbsd_fi.md | 36 +++---- docs/installation/otp_en.md | 100 +++++++++--------- docs/installation/otp_vs_from_source.include | 2 +- docs/installation/yunohost_en.md | 9 -- 16 files changed, 350 insertions(+), 364 deletions(-) delete mode 100644 docs/installation/yunohost_en.md diff --git a/README.md b/README.md index e4817e6c6..69a3d48ee 100644 --- a/README.md +++ b/README.md @@ -22,7 +22,6 @@ If your platform is not supported, or you just want to be able to edit the sourc - [Alpine Linux](https://docs.akkoma.dev/main/backend/installation/alpine_linux_en/) - [Arch Linux](https://docs.akkoma.dev/main/backend/installation/arch_linux_en/) -- [CentOS 7](https://docs.akkoma.dev/main/backend/installation/centos7_en/) - [Debian-based](https://docs.akkoma.dev/main/backend/installation/debian_based_en/) - [Debian-based (jp)](https://docs.akkoma.dev/main/backend/installation/debian_based_jp/) - [FreeBSD](https://docs.akkoma.dev/main/backend/installation/freebsd_en/) diff --git a/docs/index.md b/docs/index.md index 80c5d2631..db7e22aee 100644 --- a/docs/index.md +++ b/docs/index.md @@ -1,26 +1,28 @@ -# Introduction to Pleroma -## What is Pleroma? -Pleroma is a federated social networking platform, compatible with Mastodon and other ActivityPub implementations. It is free software licensed under the AGPLv3. -It actually consists of two components: a backend, named simply Pleroma, and a user-facing frontend, named Pleroma-FE. It also includes the Mastodon frontend, if that's your thing. +**Note:** Akkoma documentation is still being updated, so you may still see references to Pleroma in many places. + +# Introduction to Akkoma +## What is Akkoma? +Akkoma is a federated social networking platform, compatible with Mastodon and other ActivityPub implementations. It is free software licensed under the AGPLv3. +It actually consists of two components: a backend, named simply Akkoma, and a user-facing frontend, named Pleroma-FE. It also includes the Mastodon frontend, if that's your thing. It's part of what we call the fediverse, a federated network of instances which speak common protocols and can communicate with each other. One account on an instance is enough to talk to the entire fediverse! ## How can I use it? -Pleroma instances are already widely deployed, a list can be found at and . +Akkoma instances are already widely deployed, a list can be found at and . If you don't feel like joining an existing instance, but instead prefer to deploy your own instance, that's easy too! Installation instructions can be found in the installation section of these docs. ## I got an account, now what? -Great! Now you can explore the fediverse! Open the login page for your Pleroma instance (e.g. ) and login with your username and password. (If you don't have an account yet, click on Register) +Great! Now you can explore the fediverse! Open the login page for your Akkoma instance (e.g. ) and login with your username and password. (If you don't have an account yet, click on Register) ### Pleroma-FE -The default front-end used by Pleroma is Pleroma-FE. You can find more information on what it is and how to use it in the [Introduction to Pleroma-FE](../frontend). +The default front-end used by Akkoma is Pleroma-FE. You can find more information on what it is and how to use it in the [Introduction to Pleroma-FE](../frontend). ### Mastodon interface -If the Pleroma interface isn't your thing, or you're just trying something new but you want to keep using the familiar Mastodon interface, we got that too! -Just add a "/web" after your instance url (e.g. ) and you'll end on the Mastodon web interface, but with a Pleroma backend! MAGIC! +If the Pleroma-FE interface isn't your thing, or you're just trying something new but you want to keep using the familiar Mastodon interface, we got that too! +Just add a "/web" after your instance url (e.g. ) and you'll end on the Mastodon web interface, but with a Akkoma backend! MAGIC! The Mastodon interface is from the Glitch-soc fork. For more information on the Mastodon interface you can check the [Mastodon](https://docs.joinmastodon.org/) and [Glitch-soc](https://glitch-soc.github.io/docs/) documentation. -Remember, what you see is only the frontend part of Mastodon, the backend is still Pleroma. +Remember, what you see is only the frontend part of Mastodon, the backend is still Akkoma. diff --git a/docs/installation/alpine_linux_en.md b/docs/installation/alpine_linux_en.md index c37ff0c63..2bed976a9 100644 --- a/docs/installation/alpine_linux_en.md +++ b/docs/installation/alpine_linux_en.md @@ -6,7 +6,7 @@ This guide is a step-by-step installation guide for Alpine Linux. The instructions were verified against Alpine v3.10 standard image. You might miss additional dependencies if you use `netboot` instead. -It assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.linode.com/docs/tools-reference/custom-kernels-distros/install-alpine-linux-on-your-linode/#configuration). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su -l -s $SHELL -c 'command'` instead. +It assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.linode.com/docs/tools-reference/custom-kernels-distros/install-alpine-linux-on-your-linode/#configuration). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su -l -s $SHELL -c 'command'` instead. {! backend/installation/generic_dependencies.include !} @@ -71,46 +71,46 @@ sudo rc-update add postgresql sudo apk add ffmpeg imagemagick exiftool ``` -### Install PleromaBE +### Install AkkomaBE -* Add a new system user for the Pleroma service: +* Add a new system user for the Akkoma service: ```shell -sudo addgroup pleroma -sudo adduser -S -s /bin/false -h /opt/pleroma -H -G pleroma pleroma +sudo addgroup akkoma +sudo adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma ``` -**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell. +**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. -* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory: +* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: ```shell -sudo mkdir -p /opt/pleroma -sudo chown -R pleroma:pleroma /opt/pleroma -sudo -Hu pleroma git clone -b stable https://git.pleroma.social/pleroma/pleroma /opt/pleroma +sudo mkdir -p /opt/akkoma +sudo chown -R akkoma:akkoma /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma ``` * Change to the new directory: ```shell -cd /opt/pleroma +cd /opt/akkoma ``` -* Install the dependencies for Pleroma and answer with `yes` if it asks you to install `Hex`: +* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`: ```shell -sudo -Hu pleroma mix deps.get +sudo -Hu akkoma mix deps.get ``` -* Generate the configuration: `sudo -Hu pleroma MIX_ENV=prod mix pleroma.instance gen` +* Generate the configuration: `sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen` * Answer with `yes` if it asks you to install `rebar3`. - * This may take some time, because parts of pleroma get compiled first. + * This may take some time, because parts of akkoma get compiled first. * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. -* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): ```shell -sudo -Hu pleroma mv config/{generated_config.exs,prod.secret.exs} +sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} ``` * The previous command creates also the file `config/setup_db.psql`, with which you can create the database: @@ -122,18 +122,18 @@ sudo -Hu postgres psql -f config/setup_db.psql * Now run the database migration: ```shell -sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate +sudo -Hu akkoma MIX_ENV=prod mix ecto.migrate ``` -* Now you can start Pleroma already +* Now you can start Akkoma already ```shell -sudo -Hu pleroma MIX_ENV=prod mix phx.server +sudo -Hu akkoma MIX_ENV=prod mix phx.server ``` ### Finalize installation -If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create an OpenRC service file for Pleroma. +If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Akkoma and you should consider to create an OpenRC service file for Akkoma. #### Nginx @@ -161,7 +161,7 @@ If that doesn’t work, make sure, that nginx is not already running. If it stil * Copy the example nginx configuration to the nginx folder ```shell -sudo cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/conf.d/pleroma.conf +sudo cp /opt/akkoma/installation/akkoma.nginx /etc/nginx/conf.d/akkoma.conf ``` * Before starting nginx edit the configuration and change it to your needs. You must change change `server_name` and the paths to the certificates. You can use `nano` (install with `apk add nano` if missing). @@ -202,13 +202,13 @@ sudo certbot certonly --email -d --webroot -w / * Copy example service file: ```shell -sudo cp /opt/pleroma/installation/init.d/pleroma /etc/init.d/pleroma +sudo cp /opt/akkoma/installation/init.d/akkoma /etc/init.d/akkoma ``` * Make sure to start it during the boot ```shell -sudo rc-update add pleroma +sudo rc-update add akkoma ``` #### Create your first user @@ -216,13 +216,12 @@ sudo rc-update add pleroma If your instance is up and running, you can create your first user with administrative rights with the following task: ```shell -sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new --admin +sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new --admin ``` #### Further reading {! backend/installation/further_reading.include !} - ## Questions -Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC. +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/arch_linux_en.md b/docs/installation/arch_linux_en.md index 285743d56..dfddfe23c 100644 --- a/docs/installation/arch_linux_en.md +++ b/docs/installation/arch_linux_en.md @@ -4,7 +4,7 @@ ## Installation -This guide will assume that you have administrative rights, either as root or a user with [sudo permissions](https://wiki.archlinux.org/index.php/Sudo). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su -s $SHELL -c 'command'` instead. +This guide will assume that you have administrative rights, either as root or a user with [sudo permissions](https://wiki.archlinux.org/index.php/Sudo). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su -s $SHELL -c 'command'` instead. ### Required packages @@ -65,45 +65,45 @@ sudo systemctl enable --now postgresql.service sudo pacman -S ffmpeg imagemagick perl-image-exiftool ``` -### Install PleromaBE +### Install AkkomaBE -* Add a new system user for the Pleroma service: +* Add a new system user for the Akkoma service: ```shell -sudo useradd -r -s /bin/false -m -d /var/lib/pleroma -U pleroma +sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma ``` -**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell. +**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. -* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory: +* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: ```shell -sudo mkdir -p /opt/pleroma -sudo chown -R pleroma:pleroma /opt/pleroma -sudo -Hu pleroma git clone -b stable https://git.pleroma.social/pleroma/pleroma /opt/pleroma +sudo mkdir -p /opt/akkoma +sudo chown -R akkoma:akkoma /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma ``` * Change to the new directory: ```shell -cd /opt/pleroma +cd /opt/akkoma ``` -* Install the dependencies for Pleroma and answer with `yes` if it asks you to install `Hex`: +* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`: ```shell -sudo -Hu pleroma mix deps.get +sudo -Hu akkoma mix deps.get ``` -* Generate the configuration: `sudo -Hu pleroma MIX_ENV=prod mix pleroma.instance gen` +* Generate the configuration: `sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen` * Answer with `yes` if it asks you to install `rebar3`. - * This may take some time, because parts of pleroma get compiled first. + * This may take some time, because parts of akkoma get compiled first. * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. -* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): ```shell -sudo -Hu pleroma mv config/{generated_config.exs,prod.secret.exs} +sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} ``` * The previous command creates also the file `config/setup_db.psql`, with which you can create the database: @@ -115,18 +115,18 @@ sudo -Hu postgres psql -f config/setup_db.psql * Now run the database migration: ```shell -sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate +sudo -Hu akkoma MIX_ENV=prod mix ecto.migrate ``` -* Now you can start Pleroma already +* Now you can start Akkoma already ```shell -sudo -Hu pleroma MIX_ENV=prod mix phx.server +sudo -Hu akkoma MIX_ENV=prod mix phx.server ``` ### Finalize installation -If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create a systemd service file for Pleroma. +If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Akkoma and you should consider to create a systemd service file for Akkoma. #### Nginx @@ -168,8 +168,8 @@ If that doesn’t work, make sure, that nginx is not already running. If it stil * Copy the example nginx configuration and activate it: ```shell -sudo cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.nginx -sudo ln -s /etc/nginx/sites-available/pleroma.nginx /etc/nginx/sites-enabled/pleroma.nginx +sudo cp /opt/akkoma/installation/akkoma.nginx /etc/nginx/sites-available/akkoma.nginx +sudo ln -s /etc/nginx/sites-available/akkoma.nginx /etc/nginx/sites-enabled/akkoma.nginx ``` * Before starting nginx edit the configuration and change it to your needs (e.g. change servername, change cert paths) @@ -187,21 +187,21 @@ sudo certbot certonly --email -d --webroot -w / #### Other webserver/proxies -You can find example configurations for them in `/opt/pleroma/installation/`. +You can find example configurations for them in `/opt/akkoma/installation/`. #### Systemd service * Copy example service file ```shell -sudo cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service +sudo cp /opt/akkoma/installation/akkoma.service /etc/systemd/system/akkoma.service ``` * Edit the service file and make sure that all paths fit your installation -* Enable and start `pleroma.service`: +* Enable and start `akkoma.service`: ```shell -sudo systemctl enable --now pleroma.service +sudo systemctl enable --now akkoma.service ``` #### Create your first user @@ -209,13 +209,12 @@ sudo systemctl enable --now pleroma.service If your instance is up and running, you can create your first user with administrative rights with the following task: ```shell -sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new --admin +sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new --admin ``` #### Further reading {! backend/installation/further_reading.include !} - ## Questions -Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC. +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/debian_based_en.md b/docs/installation/debian_based_en.md index 4e52b2155..b67c1edc2 100644 --- a/docs/installation/debian_based_en.md +++ b/docs/installation/debian_based_en.md @@ -4,7 +4,7 @@ ## Installation -This guide will assume you are on Debian 11 (“bullseye”) or later. This guide should also work with Ubuntu 18.04 (“Bionic Beaver”) and later. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-add-delete-and-grant-sudo-privileges-to-users-on-a-debian-vps). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu pleroma`; in this case, use `su -s $SHELL -c 'command'` instead. +This guide will assume you are on Debian 11 (“bullseye”) or later. This guide should also work with Ubuntu 18.04 (“Bionic Beaver”) and later. It also assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.digitalocean.com/community/tutorials/how-to-add-delete-and-grant-sudo-privileges-to-users-on-a-debian-vps). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su -s $SHELL -c 'command'` instead. {! backend/installation/generic_dependencies.include !} @@ -39,45 +39,45 @@ sudo apt install elixir erlang-dev erlang-nox sudo apt install imagemagick ffmpeg libimage-exiftool-perl ``` -### Install PleromaBE +### Install AkkomaBE -* Add a new system user for the Pleroma service: +* Add a new system user for the Akkoma service: ```shell -sudo useradd -r -s /bin/false -m -d /var/lib/pleroma -U pleroma +sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma ``` -**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l pleroma -s $SHELL -c 'command'` and `su -l pleroma -s $SHELL` for starting a shell. +**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell. -* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory: +* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: ```shell -sudo mkdir -p /opt/pleroma -sudo chown -R pleroma:pleroma /opt/pleroma -sudo -Hu pleroma git clone -b stable https://git.pleroma.social/pleroma/pleroma /opt/pleroma +sudo mkdir -p /opt/akkoma +sudo chown -R akkoma:akkoma /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma ``` * Change to the new directory: ```shell -cd /opt/pleroma +cd /opt/akkoma ``` -* Install the dependencies for Pleroma and answer with `yes` if it asks you to install `Hex`: +* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`: ```shell -sudo -Hu pleroma mix deps.get +sudo -Hu akkoma mix deps.get ``` -* Generate the configuration: `sudo -Hu pleroma MIX_ENV=prod mix pleroma.instance gen` +* Generate the configuration: `sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen` * Answer with `yes` if it asks you to install `rebar3`. - * This may take some time, because parts of pleroma get compiled first. + * This may take some time, because parts of akkoma get compiled first. * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. -* Check the configuration and if all looks right, rename it, so Pleroma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): +* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances): ```shell -sudo -Hu pleroma mv config/{generated_config.exs,prod.secret.exs} +sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} ``` @@ -90,18 +90,18 @@ sudo -Hu postgres psql -f config/setup_db.psql * Now run the database migration: ```shell -sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate +sudo -Hu akkoma MIX_ENV=prod mix ecto.migrate ``` -* Now you can start Pleroma already +* Now you can start Akkoma already ```shell -sudo -Hu pleroma MIX_ENV=prod mix phx.server +sudo -Hu akkoma MIX_ENV=prod mix phx.server ``` ### Finalize installation -If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Pleroma and you should consider to create a systemd service file for Pleroma. +If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Akkoma and you should consider to create a systemd service file for Akkoma. #### Nginx @@ -131,8 +131,8 @@ If that doesn’t work, make sure, that nginx is not already running. If it stil * Copy the example nginx configuration and activate it: ```shell -sudo cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.nginx -sudo ln -s /etc/nginx/sites-available/pleroma.nginx /etc/nginx/sites-enabled/pleroma.nginx +sudo cp /opt/akkoma/installation/akkoma.nginx /etc/nginx/sites-available/akkoma.nginx +sudo ln -s /etc/nginx/sites-available/akkoma.nginx /etc/nginx/sites-enabled/akkoma.nginx ``` * Before starting nginx edit the configuration and change it to your needs (e.g. change servername, change cert paths) @@ -150,21 +150,21 @@ sudo certbot certonly --email -d --webroot -w / #### Other webserver/proxies -You can find example configurations for them in `/opt/pleroma/installation/`. +You can find example configurations for them in `/opt/akkoma/installation/`. #### Systemd service * Copy example service file ```shell -sudo cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service +sudo cp /opt/akkoma/installation/akkoma.service /etc/systemd/system/akkoma.service ``` * Edit the service file and make sure that all paths fit your installation -* Enable and start `pleroma.service`: +* Enable and start `akkoma.service`: ```shell -sudo systemctl enable --now pleroma.service +sudo systemctl enable --now akkoma.service ``` #### Create your first user @@ -172,13 +172,12 @@ sudo systemctl enable --now pleroma.service If your instance is up and running, you can create your first user with administrative rights with the following task: ```shell -sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new --admin +sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new --admin ``` #### Further reading {! backend/installation/further_reading.include !} - ## Questions -Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC. +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/debian_based_jp.md b/docs/installation/debian_based_jp.md index 3736e857f..5d38f43cf 100644 --- a/docs/installation/debian_based_jp.md +++ b/docs/installation/debian_based_jp.md @@ -1,17 +1,17 @@ -# Pleromaの入れ方 +# Akkomaの入れ方 ## 日本語訳について この記事は [Installing on Debian based distributions](Installing on Debian based distributions) の日本語訳です。何かがおかしいと思ったら、原文を見てください。 ## インストール -このガイドはDebian Stretchを利用することを想定しています。Ubuntu 16.04や18.04でもおそらく動作します。また、ユーザはrootもしくはsudoにより管理者権限を持っていることを前提とします。もし、以下の操作をrootユーザで行う場合は、 `sudo` を無視してください。ただし、`sudo -Hu pleroma` のようにユーザを指定している場合には `su -s $SHELL -c 'command'` を代わりに使ってください。 +このガイドはDebian Stretchを利用することを想定しています。Ubuntu 16.04や18.04でもおそらく動作します。また、ユーザはrootもしくはsudoにより管理者権限を持っていることを前提とします。もし、以下の操作をrootユーザで行う場合は、 `sudo` を無視してください。ただし、`sudo -Hu akkoma` のようにユーザを指定している場合には `su -s $SHELL -c 'command'` を代わりに使ってください。 ### 必要なソフトウェア - PostgreSQL 9.6以上 (Ubuntu16.04では9.5しか提供されていないので,[](https://www.postgresql.org/download/linux/ubuntu/)こちらから新しいバージョンを入手してください) - `postgresql-contrib` 9.6以上 (同上) -- Elixir 1.8 以上 ([Debianのリポジトリからインストールしないこと!!! ここからインストールすること!](https://elixir-lang.org/install.html#unix-and-unix-like)。または [asdf](https://github.com/asdf-vm/asdf) をpleromaユーザーでインストールしてください) +- Elixir 1.8 以上 ([Debianのリポジトリからインストールしないこと!!! ここからインストールすること!](https://elixir-lang.org/install.html#unix-and-unix-like)。または [asdf](https://github.com/asdf-vm/asdf) をakkomaユーザーでインストールしてください) - `erlang-dev` - `erlang-nox` - `git` @@ -60,65 +60,65 @@ sudo apt install elixir erlang-dev erlang-nox sudo apt install imagemagick ffmpeg libimage-exiftool-perl ``` -### Pleroma BE (バックエンド) をインストールします +### Akkoma BE (バックエンド) をインストールします -* Pleroma用に新しいユーザーを作ります。 +* Akkoma用に新しいユーザーを作ります。 ``` -sudo useradd -r -s /bin/false -m -d /var/lib/pleroma -U pleroma +sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma ``` -**注意**: Pleromaユーザとして単発のコマンドを実行したい場合はは、`sudo -Hu pleroma command` を使ってください。シェルを使いたい場合は `sudo -Hu pleroma $SHELL`です。もし `sudo` を使わない場合は、rootユーザで `su -l pleroma -s $SHELL -c 'command'` とすることでコマンドを、`su -l pleroma -s $SHELL` とすることでシェルを開始できます。 +**注意**: Akkomaユーザとして単発のコマンドを実行したい場合はは、`sudo -Hu akkoma command` を使ってください。シェルを使いたい場合は `sudo -Hu akkoma $SHELL`です。もし `sudo` を使わない場合は、rootユーザで `su -l akkoma -s $SHELL -c 'command'` とすることでコマンドを、`su -l akkoma -s $SHELL` とすることでシェルを開始できます。 * Gitリポジトリをクローンします。 ``` -sudo mkdir -p /opt/pleroma -sudo chown -R pleroma:pleroma /opt/pleroma -sudo -Hu pleroma git clone -b stable https://git.pleroma.social/pleroma/pleroma /opt/pleroma +sudo mkdir -p /opt/akkoma +sudo chown -R akkoma:akkoma /opt/akkoma +sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma ``` * 新しいディレクトリに移動します。 ``` -cd /opt/pleroma +cd /opt/akkoma ``` -* Pleromaが依存するパッケージをインストールします。Hexをインストールしてもよいか聞かれたら、yesを入力してください。 +* Akkomaが依存するパッケージをインストールします。Hexをインストールしてもよいか聞かれたら、yesを入力してください。 ``` -sudo -Hu pleroma mix deps.get +sudo -Hu akkoma mix deps.get ``` * コンフィギュレーションを生成します。 ``` -sudo -Hu pleroma MIX_ENV=prod mix pleroma.instance gen +sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen ``` * rebar3をインストールしてもよいか聞かれたら、yesを入力してください。 - * このときにpleromaの一部がコンパイルされるため、この処理には時間がかかります。 + * このときにakkomaの一部がコンパイルされるため、この処理には時間がかかります。 * あなたのインスタンスについて、いくつかの質問されます。この質問により `config/generated_config.exs` という設定ファイルが生成されます。 * コンフィギュレーションを確認して、もし問題なければ、ファイル名を変更してください。 ``` -sudo -Hu pleroma mv config/{generated_config.exs,prod.secret.exs} +sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs} ``` * 先程のコマンドで、すでに `config/setup_db.psql` というファイルが作られています。このファイルをもとに、データベースを作成します。 ``` -sudo -Hu pleroma MIX_ENV=prod mix pleroma.instance gen +sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen ``` * そして、データベースのマイグレーションを実行します。 ``` -sudo -Hu pleroma MIX_ENV=prod mix ecto.migrate +sudo -Hu akkoma MIX_ENV=prod mix ecto.migrate ``` -* これでPleromaを起動できるようになりました。 +* これでAkkomaを起動できるようになりました。 ``` -sudo -Hu pleroma MIX_ENV=prod mix phx.server +sudo -Hu akkoma MIX_ENV=prod mix phx.server ``` ### インストールの最終段階 -あなたの新しいインスタンスを世界に向けて公開するには、nginx等のWebサーバやプロキシサーバをPleromaの前段に使用する必要があります。また、Pleroma のためにシステムサービスファイルを作成する必要があります。 +あなたの新しいインスタンスを世界に向けて公開するには、nginx等のWebサーバやプロキシサーバをAkkomaの前段に使用する必要があります。また、Akkoma のためにシステムサービスファイルを作成する必要があります。 #### Nginx @@ -143,8 +143,8 @@ sudo certbot certonly --email -d --standalone * nginxの設定ファイルサンプルをnginxフォルダーにコピーします。 ``` -sudo cp /opt/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/pleroma.nginx -sudo ln -s /etc/nginx/sites-available/pleroma.nginx /etc/nginx/sites-enabled/pleroma.nginx +sudo cp /opt/akkoma/installation/akkoma.nginx /etc/nginx/sites-available/akkoma.nginx +sudo ln -s /etc/nginx/sites-available/akkoma.nginx /etc/nginx/sites-enabled/akkoma.nginx ``` * nginxを起動する前に、設定ファイルを編集してください。例えば、サーバー名、証明書のパスなどを変更する必要があります。 @@ -160,19 +160,19 @@ sudo certbot certonly --email -d --webroot -w / ``` #### 他のWebサーバやプロキシ -これに関してはサンプルが `/opt/pleroma/installation/` にあるので、探してみてください。 +これに関してはサンプルが `/opt/akkoma/installation/` にあるので、探してみてください。 #### Systemd サービス * サービスファイルのサンプルをコピーします。 ``` -sudo cp /opt/pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service +sudo cp /opt/akkoma/installation/akkoma.service /etc/systemd/system/akkoma.service ``` * サービスファイルを変更します。すべてのパスが正しいことを確認してください -* サービスを有効化し `pleroma.service` を開始してください +* サービスを有効化し `akkoma.service` を開始してください ``` -sudo systemctl enable --now pleroma.service +sudo systemctl enable --now akkoma.service ``` #### 初期ユーザの作成 @@ -180,16 +180,9 @@ sudo systemctl enable --now pleroma.service 新たにインスタンスを作成したら、以下のコマンドにより管理者権限を持った初期ユーザを作成できます。 ``` -sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new --admin +sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new --admin ``` #### その他の設定とカスタマイズ {! backend/installation/further_reading.include !} - -## 質問ある? - -インストールについて質問がある、もしくは、うまくいかないときは、以下のところで質問できます。 - -* [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) -* **libera.chat** の **#pleroma** IRCチャンネル diff --git a/docs/installation/freebsd_en.md b/docs/installation/freebsd_en.md index 9cbe0f203..5d6779ed2 100644 --- a/docs/installation/freebsd_en.md +++ b/docs/installation/freebsd_en.md @@ -34,27 +34,27 @@ Setup the required services to automatically start at boot, using `sysrc(8)`. # pkg install imagemagick ffmpeg p5-Image-ExifTool ``` -## Configuring Pleroma +## Configuring Akkoma -Create a user for Pleroma: +Create a user for Akkoma: ``` -# pw add user pleroma -m -# echo 'export LC_ALL="en_US.UTF-8"' >> /home/pleroma/.profile -# su -l pleroma +# pw add user akkoma -m +# echo 'export LC_ALL="en_US.UTF-8"' >> /home/akkoma/.profile +# su -l akkoma ``` Clone the repository: ``` -$ cd $HOME # Should be the same as /home/pleroma -$ git clone -b stable https://git.pleroma.social/pleroma/pleroma.git +$ cd $HOME # Should be the same as /home/akkoma +$ git clone https://akkoma.dev/AkkomaGang/akkoma.git ``` -Configure Pleroma. Note that you need a domain name at this point: +Configure Akkoma. Note that you need a domain name at this point: ``` -$ cd /home/pleroma/pleroma +$ cd /home/akkoma/akkoma $ mix deps.get # Enter "y" when asked to install Hex $ MIX_ENV=prod mix pleroma.instance gen # You will be asked a few questions here. $ cp config/generated_config.exs config/prod.secret.exs @@ -66,7 +66,7 @@ now be a file in `config/setup_db.psql` that makes this easier. Edit it, and it'll be protecting your database. As root, you can now initialize the database: ``` -# cd /home/pleroma/pleroma +# cd /home/akkoma/akkoma # sudo -Hu postgres -g postgres psql -f config/setup_db.psql ``` @@ -81,11 +81,11 @@ Once this is done, restart Postgres with: Run the database migrations. -Back as the pleroma user, run the following to implement any database migrations. +Back as the akkoma user, run the following to implement any database migrations. ``` -# su -l pleroma -$ cd /home/pleroma/pleroma +# su -l akkoma +$ cd /home/akkoma/akkoma $ MIX_ENV=prod mix ecto.migrate ``` @@ -163,40 +163,40 @@ http { } ``` -As root, copy `/home/pleroma/pleroma/installation/pleroma.nginx` to -`/usr/local/etc/nginx/sites-available/pleroma.nginx`. +As root, copy `/home/akkoma/akkoma/installation/akkoma.nginx` to +`/usr/local/etc/nginx/sites-available/akkoma.nginx`. -Edit the defaults of `/usr/local/etc/nginx/sites-available/pleroma.nginx`: +Edit the defaults of `/usr/local/etc/nginx/sites-available/akkoma.nginx`: * Change `ssl_trusted_certificate` to `/var/db/acme/certs/example.tld/example.tld.cer`. * Change `ssl_certificate` to `/var/db/acme/certs/example.tld/fullchain.cer`. * Change `ssl_certificate_key` to `/var/db/acme/certs/example.tld/example.tld.key`. * Change all references of `example.tld` to your instance's domain name. -## Creating a startup script for Pleroma +## Creating a startup script for Akkoma -Pleroma will need to compile when it initially starts, which typically takes a longer -period of time. Therefore, it is good practice to initially run pleroma from the +Akkoma will need to compile when it initially starts, which typically takes a longer +period of time. Therefore, it is good practice to initially run akkoma from the command-line before utilizing the rc.d script. That is done as follows: ``` -# su -l pleroma -$ cd $HOME/pleroma +# su -l akkoma +$ cd $HOME/akkoma $ MIX_ENV=prod mix phx.server ``` Copy the startup script to the correct location and make sure it's executable: ``` -# cp /home/pleroma/pleroma/installation/freebsd/rc.d/pleroma /usr/local/etc/rc.d/pleroma -# chmod +x /usr/local/etc/rc.d/pleroma +# cp /home/akkoma/akkoma/installation/freebsd/rc.d/akkoma /usr/local/etc/rc.d/akkoma +# chmod +x /usr/local/etc/rc.d/akkoma ``` -Update the `/etc/rc.conf` and start pleroma with the following commands: +Update the `/etc/rc.conf` and start akkoma with the following commands: ``` -# sysrc pleroma_enable=YES -# service pleroma start +# sysrc akkoma_enable=YES +# service akkoma start ``` #### Create your first user @@ -204,7 +204,7 @@ Update the `/etc/rc.conf` and start pleroma with the following commands: If your instance is up and running, you can create your first user with administrative rights with the following task: ```shell -sudo -Hu pleroma MIX_ENV=prod mix pleroma.user new --admin +sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new --admin ``` ## Conclusion @@ -212,7 +212,6 @@ Restart nginx with `# service nginx restart` and you should be up and running. Make sure your time is in sync, or other instances will receive your posts with incorrect timestamps. You should have ntpd running. - ## Questions -Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC. +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/gentoo_en.md b/docs/installation/gentoo_en.md index 36882c8c8..176eaab47 100644 --- a/docs/installation/gentoo_en.md +++ b/docs/installation/gentoo_en.md @@ -4,13 +4,13 @@ ## Installation -This guide will assume that you have administrative rights, either as root or a user with [sudo permissions](https://wiki.gentoo.org/wiki/Sudo). Lines that begin with `#` indicate that they should be run as the superuser. Lines using `$` should be run as the indicated user, e.g. `pleroma$` should be run as the `pleroma` user. +This guide will assume that you have administrative rights, either as root or a user with [sudo permissions](https://wiki.gentoo.org/wiki/Sudo). Lines that begin with `#` indicate that they should be run as the superuser. Lines using `$` should be run as the indicated user, e.g. `akkoma$` should be run as the `akkoma` user. {! backend/installation/generic_dependencies.include !} ### Your make.conf, package.use, and USE flags -The only specific USE flag you should need is the `uuid` flag for `dev-db/postgresql`. Add the following line to any new file in `/etc/portage/package.use`. If you would like a suggested name for the file, either `postgresql` or `pleroma` would do fine, depending on how you like to arrange your package.use flags. +The only specific USE flag you should need is the `uuid` flag for `dev-db/postgresql`. Add the following line to any new file in `/etc/portage/package.use`. If you would like a suggested name for the file, either `postgresql` or `akkoma` would do fine, depending on how you like to arrange your package.use flags. ```text dev-db/postgresql uuid @@ -88,9 +88,9 @@ The output from emerging postgresql should give you a command for initializing t ### A note on licenses, the AGPL, and deployment procedures -If you do not plan to make any modifications to your Pleroma instance, cloning directly from the main repo will get you what you need. However, if you plan on doing any contributions to upstream development, making changes or modifications to your instance, making custom themes, or want to play around--and let's be honest here, if you're using Gentoo that is most likely you--you will save yourself a lot of headache later if you take the time right now to fork the Pleroma repo and use that in the following section. +If you do not plan to make any modifications to your Akkoma instance, cloning directly from the main repo will get you what you need. However, if you plan on doing any contributions to upstream development, making changes or modifications to your instance, making custom themes, or want to play around--and let's be honest here, if you're using Gentoo that is most likely you--you will save yourself a lot of headache later if you take the time right now to fork the Akkoma repo and use that in the following section. -Not only does this make it much easier to deploy changes you make, as you can commit and pull from upstream and all that good stuff from the comfort of your local machine then simply `git pull` on your instance server when you're ready to deploy, it also ensures you are compliant with the Affero General Public Licence that Pleroma is licenced under, which stipulates that all network services provided with modified AGPL code must publish their changes on a publicly available internet service and for free. It also makes it much easier to ask for help from and provide help to your fellow Pleroma admins if your public repo always reflects what you are running because it is part of your deployment procedure. +Not only does this make it much easier to deploy changes you make, as you can commit and pull from upstream and all that good stuff from the comfort of your local machine then simply `git pull` on your instance server when you're ready to deploy, it also ensures you are compliant with the Affero General Public Licence that Akkoma is licenced under, which stipulates that all network services provided with modified AGPL code must publish their changes on a publicly available internet service and for free. It also makes it much easier to ask for help from and provide help to your fellow Akkoma admins if your public repo always reflects what you are running because it is part of your deployment procedure. ### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](docs/installation/optional/media_graphics_packages.md)) @@ -98,82 +98,82 @@ Not only does this make it much easier to deploy changes you make, as you can co # emerge --ask media-video/ffmpeg media-gfx/imagemagick media-libs/exiftool ``` -### Install PleromaBE +### Install AkkomaBE -* Add a new system user for the Pleroma service and set up default directories: +* Add a new system user for the Akkoma service and set up default directories: -Remove `,wheel` if you do not want this user to be able to use `sudo`, however note that being able to `sudo` as the `pleroma` user will make finishing the insallation and common maintenence tasks somewhat easier: +Remove `,wheel` if you do not want this user to be able to use `sudo`, however note that being able to `sudo` as the `akkoma` user will make finishing the insallation and common maintenence tasks somewhat easier: ```shell - # useradd -m -G users,wheel -s /bin/bash pleroma + # useradd -m -G users,wheel -s /bin/bash akkoma ``` -Optional: If you are using sudo, review your sudo setup to ensure it works for you. The `/etc/sudoers` file has a lot of options and examples to help you, and [the Gentoo sudo guide](https://wiki.gentoo.org/wiki/Sudo) has more information. Finishing this installation will be somewhat easier if you have a way to sudo from the `pleroma` user, but it might be best to not allow that user to sudo during normal operation, and as such there will be a reminder at the end of this guide to double check if you would like to lock down the `pleroma` user after initial setup. +Optional: If you are using sudo, review your sudo setup to ensure it works for you. The `/etc/sudoers` file has a lot of options and examples to help you, and [the Gentoo sudo guide](https://wiki.gentoo.org/wiki/Sudo) has more information. Finishing this installation will be somewhat easier if you have a way to sudo from the `akkoma` user, but it might be best to not allow that user to sudo during normal operation, and as such there will be a reminder at the end of this guide to double check if you would like to lock down the `akkoma` user after initial setup. -**Note**: To execute a single command as the Pleroma system user, use `sudo -Hu pleroma command`. You can also switch to a shell by using `sudo -Hu pleroma $SHELL`. If you don't have or want `sudo` or would like to use the system as the `pleroma` user for instance maintenance tasks, you can simply use `su - pleroma` to switch to the `pleroma` user. +**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don't have or want `sudo` or would like to use the system as the `akkoma` user for instance maintenance tasks, you can simply use `su - akkoma` to switch to the `akkoma` user. -* Git clone the PleromaBE repository and make the Pleroma user the owner of the directory: +* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory: -It is highly recommended you use your own fork for the `https://path/to/repo` part below, however if you foolishly decide to forego using your own fork, the primary repo `https://git.pleroma.social/pleroma/pleroma` will work here. +It is highly recommended you use your own fork for the `https://path/to/repo` part below, however if you foolishly decide to forego using your own fork, the primary repo `https://akkoma.dev/AkkomaGang/akkoma.git` will work here. ```shell - pleroma$ cd ~ - pleroma$ git clone -b stable https://path/to/repo + akkoma$ cd ~ + akkoma$ git clone -b stable https://path/to/repo ``` * Change to the new directory: ```shell -pleroma$ cd ~/pleroma +akkoma$ cd ~/akkoma ``` -* Install the dependencies for Pleroma and answer with `yes` if it asks you to install `Hex`: +* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`: ```shell -pleroma$ mix deps.get +akkoma$ mix deps.get ``` * Generate the configuration: ```shell -pleroma$ MIX_ENV=prod mix pleroma.instance gen +akkoma$ MIX_ENV=prod mix pleroma.instance gen ``` * Answer with `yes` if it asks you to install `rebar3`. - * This part precompiles some parts of Pleroma, so it might take a few moments + * This part precompiles some parts of Akkoma, so it might take a few moments * After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`. * Spend some time with `generated_config.exs` to ensure that everything is in order. If you plan on using an S3-compatible service to store your local media, that can be done here. You will likely mostly be using `prod.secret.exs` for a production instance, however if you would like to set up a development environment, make a copy to `dev.secret.exs` and adjust settings as needed as well. ```shell -pleroma$ mv config/generated_config.exs config/prod.secret.exs +akkoma$ mv config/generated_config.exs config/prod.secret.exs ``` * The previous command creates also the file `config/setup_db.psql`, with which you can create the database. Ensure that it is using the correct database name on the `CREATE DATABASE` and the `\c` lines, then run the postgres script: ```shell -pleroma$ sudo -Hu postgres psql -f config/setup_db.psql +akkoma$ sudo -Hu postgres psql -f config/setup_db.psql ``` * Now run the database migration: ```shell -pleroma$ MIX_ENV=prod mix ecto.migrate +akkoma$ MIX_ENV=prod mix ecto.migrate ``` -* Now you can start Pleroma already +* Now you can start Akkoma already ```shell -pleroma$ MIX_ENV=prod mix phx.server +akkoma$ MIX_ENV=prod mix phx.server ``` -It probably won't work over the public internet quite yet, however, as we still need to set up a web servere to proxy to the pleroma application, as well as configure SSL. +It probably won't work over the public internet quite yet, however, as we still need to set up a web servere to proxy to the akkoma application, as well as configure SSL. ### Finalize installation -Assuming you want to open your newly installed federated social network to, well, the federation, you should run nginx or some other webserver/proxy in front of Pleroma. It is also a good idea to set up Pleroma to run as a system service. +Assuming you want to open your newly installed federated social network to, well, the federation, you should run nginx or some other webserver/proxy in front of Akkoma. It is also a good idea to set up Akkoma to run as a system service. #### Nginx @@ -217,13 +217,13 @@ If you are using any additional subdomains, such as for a media proxy, you can r * Copy the example nginx configuration and activate it: ```shell - # cp /home/pleroma/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/ - # ln -s /etc/nginx/sites-available/pleroma.nginx /etc/nginx/sites-enabled/pleroma.nginx + # cp /home/akkoma/akkoma/installation/akkoma.nginx /etc/nginx/sites-available/ + # ln -s /etc/nginx/sites-available/akkoma.nginx /etc/nginx/sites-enabled/akkoma.nginx ``` * Take some time to ensure that your nginx config is correct -Replace all instances of `example.tld` with your instance's public URL. If for whatever reason you made changes to the port that your pleroma app runs on, be sure that is reflected in your configuration. +Replace all instances of `example.tld` with your instance's public URL. If for whatever reason you made changes to the port that your akkoma app runs on, be sure that is reflected in your configuration. Pay special attention to the line that begins with `ssl_ecdh_curve`. It is stongly advised to comment that line out so that OpenSSL will use its full capabilities, and it is also possible you are running OpenSSL 1.0.2 necessitating that you do this. @@ -254,14 +254,14 @@ This will run certbot on the first of the month at midnight. If you'd rather run #### Other webserver/proxies -If you would like to use other webservers or proxies, there are example configurations for some popular alternatives in `/home/pleroma/pleroma/installation/`. You can, of course, check out [the Gentoo wiki](https://wiki.gentoo.org) for more information on installing and configuring said alternatives. +If you would like to use other webservers or proxies, there are example configurations for some popular alternatives in `/home/akkoma/akkoma/installation/`. You can, of course, check out [the Gentoo wiki](https://wiki.gentoo.org) for more information on installing and configuring said alternatives. #### Create the uploads folder -Even if you are using S3, Pleroma needs someplace to store media posted on your instance. If you are using the `/home/pleroma/pleroma` root folder suggested by this guide, simply: +Even if you are using S3, Akkoma needs someplace to store media posted on your instance. If you are using the `/home/akkoma/akkoma` root folder suggested by this guide, simply: ```shell - pleroma$ mkdir -p ~/pleroma/uploads + akkoma$ mkdir -p ~/akkoma/uploads ``` #### init.d service @@ -269,16 +269,16 @@ Even if you are using S3, Pleroma needs someplace to store media posted on your * Copy example service file ```shell - # cp /home/pleroma/pleroma/installation/init.d/pleroma /etc/init.d/ + # cp /home/akkoma/akkoma/installation/init.d/akkoma /etc/init.d/ ``` * Be sure to take a look at this service file and make sure that all paths fit your installation -* Enable and start `pleroma`: +* Enable and start `akkoma`: ```shell - # rc-update add pleroma default - # /etc/init.d/pleroma start + # rc-update add akkoma default + # /etc/init.d/akkoma start ``` #### Create your first user @@ -286,17 +286,16 @@ Even if you are using S3, Pleroma needs someplace to store media posted on your If your instance is up and running, you can create your first user with administrative rights with the following task: ```shell -pleroma$ MIX_ENV=prod mix pleroma.user new --admin +akkoma$ MIX_ENV=prod mix pleroma.user new --admin ``` #### Privilege cleanup -If you opted to allow sudo for the `pleroma` user but would like to remove the ability for greater security, now might be a good time to edit `/etc/sudoers` and/or change the groups the `pleroma` user belongs to. Be sure to restart the pleroma service afterwards to ensure it picks up on the changes. +If you opted to allow sudo for the `akkoma` user but would like to remove the ability for greater security, now might be a good time to edit `/etc/sudoers` and/or change the groups the `akkoma` user belongs to. Be sure to restart the akkoma service afterwards to ensure it picks up on the changes. #### Further reading {! backend/installation/further_reading.include !} - ## Questions -Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC. +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/migrating_from_source_otp_en.md b/docs/installation/migrating_from_source_otp_en.md index e4a01d8db..001999929 100644 --- a/docs/installation/migrating_from_source_otp_en.md +++ b/docs/installation/migrating_from_source_otp_en.md @@ -20,65 +20,65 @@ The system needs to have `curl` and `unzip` installed for downloading and unpack ``` ## Moving content out of the application directory -When using OTP releases the application directory changes with every version so it would be a bother to keep content there (and also dangerous unless `--no-rm` option is used when updating). Fortunately almost all paths in Pleroma are configurable, so it is possible to move them out of there. +When using OTP releases the application directory changes with every version so it would be a bother to keep content there (and also dangerous unless `--no-rm` option is used when updating). Fortunately almost all paths in Akkoma are configurable, so it is possible to move them out of there. -Pleroma should be stopped before proceeding. +Akkoma should be stopped before proceeding. ### Moving uploads/custom public files directory ```sh # Create uploads directory and set proper permissions (skip if using a remote uploader) -# Note: It does not have to be `/var/lib/pleroma/uploads`, you can configure it to be something else later -mkdir -p /var/lib/pleroma/uploads -chown -R pleroma /var/lib/pleroma +# Note: It does not have to be `/var/lib/akkoma/uploads`, you can configure it to be something else later +mkdir -p /var/lib/akkoma/uploads +chown -R akkoma /var/lib/akkoma # Create custom public files directory -# Note: It does not have to be `/var/lib/pleroma/static`, you can configure it to be something else later -mkdir -p /var/lib/pleroma/static -chown -R pleroma /var/lib/pleroma +# Note: It does not have to be `/var/lib/akkoma/static`, you can configure it to be something else later +mkdir -p /var/lib/akkoma/static +chown -R akkoma /var/lib/akkoma -# If you use the local uploader with default settings your uploads should be located in `~pleroma/uploads` -mv ~pleroma/uploads/* /var/lib/pleroma/uploads +# If you use the local uploader with default settings your uploads should be located in `~akkoma/uploads` +mv ~akkoma/uploads/* /var/lib/akkoma/uploads -# If you have created the custom public files directory with default settings it should be located in `~pleroma/instance/static` -mv ~pleroma/instance/static /var/lib/pleroma/static +# If you have created the custom public files directory with default settings it should be located in `~akkoma/instance/static` +mv ~akkoma/instance/static /var/lib/akkoma/static ``` ### Moving emoji Assuming you have all emojis in subdirectories of `priv/static/emoji` moving them can be done with ```sh -mkdir /var/lib/pleroma/static/emoji -ls -d ~pleroma/priv/static/emoji/*/ | xargs -i sh -c 'mv "{}" "/var/lib/pleroma/static/emoji/$(basename {})"' +mkdir /var/lib/akkoma/static/emoji +ls -d ~akkoma/priv/static/emoji/*/ | xargs -i sh -c 'mv "{}" "/var/lib/akkoma/static/emoji/$(basename {})"' ``` But, if for some reason you have custom emojis in the root directory you should copy the whole directory instead. ```sh -mv ~pleroma/priv/static/emoji /var/lib/pleroma/static/emoji +mv ~akkoma/priv/static/emoji /var/lib/akkoma/static/emoji ``` -and then copy custom emojis to `/var/lib/pleroma/static/emoji/custom`. +and then copy custom emojis to `/var/lib/akkoma/static/emoji/custom`. -This is needed because storing custom emojis in the root directory is deprecated, but if you just move them to `/var/lib/pleroma/static/emoji/custom` it will break emoji urls on old posts. +This is needed because storing custom emojis in the root directory is deprecated, but if you just move them to `/var/lib/akkoma/static/emoji/custom` it will break emoji urls on old posts. Note that globs have been replaced with `pack_extensions`, so if your emojis are not in png/gif you should [modify the default value](../configuration/cheatsheet.md#emoji). ### Moving the config ```sh # Create the config directory -# The default path for Pleroma config is /etc/pleroma/config.exs +# The default path for Akkoma config is /etc/akkoma/config.exs # but it can be set via PLEROMA_CONFIG_PATH environment variable -mkdir -p /etc/pleroma +mkdir -p /etc/akkoma # Move the config file -mv ~pleroma/config/prod.secret.exs /etc/pleroma/config.exs +mv ~akkoma/config/prod.secret.exs /etc/akkoma/config.exs # Change `use Mix.Config` at the top to `import Config` -$EDITOR /etc/pleroma/config.exs +$EDITOR /etc/akkoma/config.exs ``` ## Installing the release Before proceeding, get the flavour from [Detecting flavour](otp_en.md#detecting-flavour) section in OTP installation guide. ```sh -# Delete all files in pleroma user's directory -rm -r ~pleroma/* +# Delete all files in akkoma user's directory +rm -r ~akkoma/* # Set the flavour environment variable to the string you got in Detecting flavour section. # For example if the flavour is `amd64-musl` the command will be @@ -86,58 +86,61 @@ export FLAVOUR="amd64-musl" # Clone the release build into a temporary directory and unpack it # Replace `stable` with `unstable` if you want to run the unstable branch -su pleroma -s $SHELL -lc " -curl 'https://git.pleroma.social/api/v4/projects/2/jobs/artifacts/stable/download?job=$FLAVOUR' -o /tmp/pleroma.zip -unzip /tmp/pleroma.zip -d /tmp/ +su akkoma -s $SHELL -lc " +curl 'https://akkoma-updates.s3-website.fr-par.scw.cloud/develop/akkoma-$FLAVOUR.zip' -o /tmp/akkoma.zip +unzip /tmp/akkoma.zip -d /tmp/ " # Move the release to the home directory and delete temporary files -su pleroma -s $SHELL -lc " -mv /tmp/release/* ~pleroma/ +su akkoma -s $SHELL -lc " +mv /tmp/release/* ~akkoma/ rmdir /tmp/release -rm /tmp/pleroma.zip +rm /tmp/akkoma.zip " # Start the instance to verify that everything is working as expected -su pleroma -s $SHELL -lc "./bin/pleroma daemon" +su akkoma -s $SHELL -lc "./bin/pleroma daemon" # Wait for about 20 seconds and query the instance endpoint, if it shows your uri, name and email correctly, you are configured correctly sleep 20 && curl http://localhost:4000/api/v1/instance # Stop the instance -su pleroma -s $SHELL -lc "./bin/pleroma stop" +su akkoma -s $SHELL -lc "./bin/pleroma stop" ``` ## Setting up a system service OTP releases have different service files than from-source installs so they need to be copied over again. -**Warning:** The service files assume pleroma user's home directory is `/opt/pleroma`, please make sure all paths fit your installation. +**Warning:** The service files assume akkoma user's home directory is `/opt/akkoma`, please make sure all paths fit your installation. === "Alpine" ```sh # Copy the service into a proper directory - cp -f ~pleroma/installation/init.d/pleroma /etc/init.d/pleroma + cp -f ~akkoma/installation/init.d/akkoma /etc/init.d/akkoma - # Start pleroma - rc-service pleroma start + # Start akkoma + rc-service akkoma start ``` === "Debian/Ubuntu" ```sh # Copy the service into a proper directory - cp ~pleroma/installation/pleroma.service /etc/systemd/system/pleroma.service + cp ~akkoma/installation/akkoma.service /etc/systemd/system/akkoma.service # Reload service files systemctl daemon-reload - # Reenable pleroma to start on boot - systemctl reenable pleroma + # Reenable akkoma to start on boot + systemctl reenable akkoma - # Start pleroma - systemctl start pleroma + # Start akkoma + systemctl start akkoma ``` ## Running mix tasks Refer to [Running mix tasks](otp_en.md#running-mix-tasks) section from OTP release installation guide. ## Updating Refer to [Updating](otp_en.md#updating) section from OTP release installation guide. +## Questions + +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/migrating_to_akkoma.md b/docs/installation/migrating_to_akkoma.md index 0aef40f66..698e054f1 100644 --- a/docs/installation/migrating_to_akkoma.md +++ b/docs/installation/migrating_to_akkoma.md @@ -16,14 +16,14 @@ aside from actually responsive maintainer(s)? let's lookie here, we've got: ## Actually migrating Let's say you're very cool and have decided to move to the cooler -fork of Pleroma - luckily this isn't very hard. +fork of Akkoma - luckily this isn't very hard. You'll need to update the backend, then possibly the frontend, depending on your setup. ## From Source -If you're running the source Pleroma install, you'll need to set the +If you're running the source Akkoma install, you'll need to set the upstream git URL then just rebuild - that'll be: ```bash diff --git a/docs/installation/netbsd_en.md b/docs/installation/netbsd_en.md index 41b3b0072..df05f0e96 100644 --- a/docs/installation/netbsd_en.md +++ b/docs/installation/netbsd_en.md @@ -8,7 +8,7 @@ pkgin should have been installed by the NetBSD installer if you selected the right options. If it isn't installed, install it using pkg_add. Note that `postgresql11-contrib` is needed for the Postgres extensions -Pleroma uses. +Akkoma uses. The `mksh` shell is needed to run the Elixir `mix` script. @@ -50,28 +50,28 @@ First, run `# /etc/rc.d/pgsql start`. Then, `$ sudo -Hu pgsql -g pgsql createdb` `# pkgin install ImageMagick ffmpeg4 p5-Image-ExifTool` -## Configuring Pleroma +## Configuring Akkoma -Create a user for Pleroma: +Create a user for Akkoma: ``` -# groupadd pleroma -# useradd -d /home/pleroma -m -g pleroma -s /usr/pkg/bin/mksh pleroma -# echo 'export LC_ALL="en_GB.UTF-8"' >> /home/pleroma/.profile -# su -l pleroma -c $SHELL +# groupadd akkoma +# useradd -d /home/akkoma -m -g akkoma -s /usr/pkg/bin/mksh akkoma +# echo 'export LC_ALL="en_GB.UTF-8"' >> /home/akkoma/.profile +# su -l akkoma -c $SHELL ``` Clone the repository: ``` -$ cd /home/pleroma -$ git clone -b stable https://git.pleroma.social/pleroma/pleroma.git +$ cd /home/akkoma +$ git clone https://akkoma.dev/AkkomaGang/akkoma.git ``` -Configure Pleroma. Note that you need a domain name at this point: +Configure Akkoma. Note that you need a domain name at this point: ``` -$ cd /home/pleroma/pleroma +$ cd /home/akkoma/akkoma $ mix deps.get $ MIX_ENV=prod mix pleroma.instance gen # You will be asked a few questions here. ``` @@ -101,7 +101,7 @@ $ MIX_ENV=prod mix ecto.migrate ## Configuring nginx Install the example configuration file -`/home/pleroma/pleroma/installation/pleroma.nginx` to +`/home/akkoma/akkoma/installation/akkoma.nginx` to `/usr/pkg/etc/nginx.conf`. Note that it will need to be wrapped in a `http {}` block. You should add @@ -172,24 +172,24 @@ Let's add auto-renewal to `/etc/daily.local` --stateless ``` -## Creating a startup script for Pleroma +## Creating a startup script for Akkoma Copy the startup script to the correct location and make sure it's executable: ``` -# cp /home/pleroma/pleroma/installation/netbsd/rc.d/pleroma /etc/rc.d/pleroma -# chmod +x /etc/rc.d/pleroma +# cp /home/akkoma/akkoma/installation/netbsd/rc.d/akkoma /etc/rc.d/akkoma +# chmod +x /etc/rc.d/akkoma ``` Add the following to `/etc/rc.conf`: ``` -pleroma=YES -pleroma_home="/home/pleroma" -pleroma_user="pleroma" +akkoma=YES +akkoma_home="/home/akkoma" +akkoma_user="akkoma" ``` -Run `# /etc/rc.d/pleroma start` to start Pleroma. +Run `# /etc/rc.d/akkoma start` to start Akkoma. ## Conclusion @@ -209,3 +209,6 @@ incorrect timestamps. You should have ntpd running. ## Questions Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC. +## Questions + +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/openbsd_en.md b/docs/installation/openbsd_en.md index c80c8f678..d53e40497 100644 --- a/docs/installation/openbsd_en.md +++ b/docs/installation/openbsd_en.md @@ -1,6 +1,6 @@ # Installing on OpenBSD -This guide describes the installation and configuration of pleroma (and the required software to run it) on a single OpenBSD 6.6 server. +This guide describes the installation and configuration of akkoma (and the required software to run it) on a single OpenBSD 6.6 server. For any additional information regarding commands and configuration files mentioned here, check the man pages [online](https://man.openbsd.org/) or directly on your server with the man command. @@ -15,7 +15,7 @@ To install them, run the following command (with doas or as root): pkg_add elixir gmake git postgresql-server postgresql-contrib cmake ffmpeg ImageMagick ``` -Pleroma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt. +Akkoma requires a reverse proxy, OpenBSD has relayd in base (and is used in this guide) and packages/ports are available for nginx (www/nginx) and apache (www/apache-httpd). Independently of the reverse proxy, [acme-client(1)](https://man.openbsd.org/acme-client) can be used to get a certificate from Let's Encrypt. #### Optional software @@ -30,20 +30,20 @@ To install the above: pkg_add ImageMagick ffmpeg p5-Image-ExifTool ``` -#### Creating the pleroma user -Pleroma will be run by a dedicated user, \_pleroma. Before creating it, insert the following lines in login.conf: +#### Creating the akkoma user +Akkoma will be run by a dedicated user, \_akkoma. Before creating it, insert the following lines in login.conf: ``` -pleroma:\ +akkoma:\ :datasize-max=1536M:\ :datasize-cur=1536M:\ :openfiles-max=4096 ``` -This creates a "pleroma" login class and sets higher values than default for datasize and openfiles (see [login.conf(5)](https://man.openbsd.org/login.conf)), this is required to avoid having pleroma crash some time after starting. +This creates a "akkoma" login class and sets higher values than default for datasize and openfiles (see [login.conf(5)](https://man.openbsd.org/login.conf)), this is required to avoid having akkoma crash some time after starting. -Create the \_pleroma user, assign it the pleroma login class and create its home directory (/home/\_pleroma/): `useradd -m -L pleroma _pleroma` +Create the \_akkoma user, assign it the akkoma login class and create its home directory (/home/\_akkoma/): `useradd -m -L akkoma _akkoma` -#### Clone pleroma's directory -Enter a shell as the \_pleroma user. As root, run `su _pleroma -;cd`. Then clone the repository with `git clone -b stable https://git.pleroma.social/pleroma/pleroma.git`. Pleroma is now installed in /home/\_pleroma/pleroma/, it will be configured and started at the end of this guide. +#### Clone akkoma's directory +Enter a shell as the \_akkoma user. As root, run `su _akkoma -;cd`. Then clone the repository with `git clone https://akkoma.dev/AkkomaGang/akkoma.git`. Akkoma is now installed in /home/\_akkoma/akkoma/, it will be configured and started at the end of this guide. #### PostgreSQL Start a shell as the \_postgresql user (as root run `su _postgresql -` then run the `initdb` command to initialize postgresql: @@ -137,7 +137,7 @@ ln -s /etc/ssl/private/.key /etc/ssl/private/.key This will have to be done for each IPv4 and IPv6 address relayd listens on. #### relayd -relayd will be used as the reverse proxy sitting in front of pleroma. +relayd will be used as the reverse proxy sitting in front of akkoma. Insert the following configuration in /etc/relayd.conf: ``` # $OpenBSD: relayd.conf,v 1.4 2018/03/23 09:55:06 claudio Exp $ @@ -145,19 +145,19 @@ Insert the following configuration in /etc/relayd.conf: ext_inet="" ext_inet6="" -table { 127.0.0.1 } +table { 127.0.0.1 } table { 127.0.0.1 } -http protocol plerup { # Protocol for upstream pleroma server +http protocol plerup { # Protocol for upstream akkoma server #tcp { nodelay, sack, socket buffer 65536, backlog 128 } # Uncomment and adjust as you see fit tls ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305" tls ecdhe secp384r1 - # Forward some paths to the local server (as pleroma won't respond to them as you might want) + # Forward some paths to the local server (as akkoma won't respond to them as you might want) pass request quick path "/robots.txt" forward to # Append a bunch of headers - match request header append "X-Forwarded-For" value "$REMOTE_ADDR" # This two header and the next one are not strictly required by pleroma but adding them won't hurt + match request header append "X-Forwarded-For" value "$REMOTE_ADDR" # This two header and the next one are not strictly required by akkoma but adding them won't hurt match request header append "X-Forwarded-By" value "$SERVER_ADDR:$SERVER_PORT" match response header append "X-XSS-Protection" value "1; mode=block" @@ -170,7 +170,7 @@ http protocol plerup { # Protocol for upstream pleroma server match request header append "Connection" value "upgrade" #match response header append "Strict-Transport-Security" value "max-age=31536000; includeSubDomains" # Uncomment this only after you get HTTPS working. - # If you do not want remote frontends to be able to access your Pleroma backend server, comment these lines + # If you do not want remote frontends to be able to access your Akkoma backend server, comment these lines match response header append "Access-Control-Allow-Origin" value "*" match response header append "Access-Control-Allow-Methods" value "POST, PUT, DELETE, GET, PATCH, OPTIONS" match response header append "Access-Control-Allow-Headers" value "Authorization, Content-Type, Idempotency-Key" @@ -184,7 +184,7 @@ relay wwwtls { protocol plerup - forward to port 4000 check http "/" code 200 + forward to port 4000 check http "/" code 200 forward to port 80 check http "/robots.txt" code 200 } ``` @@ -225,27 +225,27 @@ Replace ** by your server's network interface name (which yo Check pf's configuration by running `pfctl -nf /etc/pf.conf`, load it with `pfctl -f /etc/pf.conf` and enable pf at boot with `rcctl enable pf`. -#### Configure and start pleroma -Enter a shell as \_pleroma (as root `su _pleroma -`) and enter pleroma's installation directory (`cd ~/pleroma/`). +#### Configure and start akkoma +Enter a shell as \_akkoma (as root `su _akkoma -`) and enter akkoma's installation directory (`cd ~/akkoma/`). Then follow the main installation guide: * run `mix deps.get` * run `MIX_ENV=prod mix pleroma.instance gen` and enter your instance's information when asked * copy config/generated\_config.exs to config/prod.secret.exs. The default values should be sufficient but you should edit it and check that everything seems OK. - * exit your current shell back to a root one and run `psql -U postgres -f /home/_pleroma/pleroma/config/setup_db.psql` to setup the database. - * return to a \_pleroma shell into pleroma's installation directory (`su _pleroma -;cd ~/pleroma`) and run `MIX_ENV=prod mix ecto.migrate` + * exit your current shell back to a root one and run `psql -U postgres -f /home/_akkoma/akkoma/config/setup_db.psql` to setup the database. + * return to a \_akkoma shell into akkoma's installation directory (`su _akkoma -;cd ~/akkoma`) and run `MIX_ENV=prod mix ecto.migrate` -As \_pleroma in /home/\_pleroma/pleroma, you can now run `LC_ALL=en_US.UTF-8 MIX_ENV=prod mix phx.server` to start your instance. +As \_akkoma in /home/\_akkoma/akkoma, you can now run `LC_ALL=en_US.UTF-8 MIX_ENV=prod mix phx.server` to start your instance. In another SSH session/tmux window, check that it is working properly by running `ftp -MVo - http://127.0.0.1:4000/api/v1/instance`, you should get json output. Double-check that *uri*'s value is your instance's domain name. -##### Starting pleroma at boot -An rc script to automatically start pleroma at boot hasn't been written yet, it can be run in a tmux session (tmux is in base). +##### Starting akkoma at boot +An rc script to automatically start akkoma at boot hasn't been written yet, it can be run in a tmux session (tmux is in base). #### Create administrative user -If your instance is up and running, you can create your first user with administrative rights with the following command as the \_pleroma user. +If your instance is up and running, you can create your first user with administrative rights with the following command as the \_akkoma user. ``` LC_ALL=en_US.UTF-8 MIX_ENV=prod mix pleroma.user new --admin ``` @@ -256,4 +256,4 @@ LC_ALL=en_US.UTF-8 MIX_ENV=prod mix pleroma.user new /etc/periodic/daily/renew-pleroma-cert - chmod +x /etc/periodic/daily/renew-pleroma-cert + ' > /etc/periodic/daily/renew-akkoma-cert + chmod +x /etc/periodic/daily/renew-akkoma-cert - # If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert + # If everything worked the output should contain /etc/cron.daily/renew-akkoma-cert run-parts --test /etc/periodic/daily ``` @@ -284,17 +284,17 @@ nginx -t # Add it to the daily cron echo '#!/bin/sh certbot renew --cert-name yourinstance.tld --webroot -w /var/lib/letsencrypt/ --post-hook "systemctl reload nginx" - ' > /etc/cron.daily/renew-pleroma-cert - chmod +x /etc/cron.daily/renew-pleroma-cert + ' > /etc/cron.daily/renew-akkoma-cert + chmod +x /etc/cron.daily/renew-akkoma-cert - # If everything worked the output should contain /etc/cron.daily/renew-pleroma-cert + # If everything worked the output should contain /etc/cron.daily/renew-akkoma-cert run-parts --test /etc/cron.daily ``` ## Create your first user and set as admin ```sh -cd /opt/pleroma -su pleroma -s $SHELL -lc "./bin/pleroma_ctl user new joeuser joeuser@sld.tld --admin" +cd /opt/akkoma +su akkoma -s $SHELL -lc "./bin/pleroma_ctl user new joeuser joeuser@sld.tld --admin" ``` This will create an account withe the username of 'joeuser' with the email address of joeuser@sld.tld, and set that user's account as an admin. This will result in a link that you can paste into the browser, which logs you in and enables you to set the password. @@ -304,4 +304,4 @@ This will create an account withe the username of 'joeuser' with the email addre ## Questions -Questions about the installation or didn’t it work as it should be, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC, you can also [file an issue on our Gitlab](https://git.pleroma.social/pleroma/pleroma-support/issues/new). +If you encounter any issues or have questions regarding the install process, feel free to ask at [meta.akkoma.dev](https://meta.akkoma.dev/). diff --git a/docs/installation/otp_vs_from_source.include b/docs/installation/otp_vs_from_source.include index 63e837a53..4fc478991 100644 --- a/docs/installation/otp_vs_from_source.include +++ b/docs/installation/otp_vs_from_source.include @@ -1,3 +1,3 @@ ## OTP releases vs from-source installations -There are two ways to install Pleroma. You can use OTP releases or do a from-source installation. OTP releases are as close as you can get to binary releases with Erlang/Elixir. The release is self-contained, and provides everything needed to boot it, it is easily administered via the provided shell script to open up a remote console, start/stop/restart the release, start in the background, send remote commands, and more. With from source installations you install Pleroma from source, meaning you have to install certain dependencies like Erlang+Elixir and compile Pleroma yourself. +There are two ways to install Akkoma. You can use OTP releases or do a from-source installation. OTP releases are as close as you can get to binary releases with Erlang/Elixir. The release is self-contained, and provides everything needed to boot it, it is easily administered via the provided shell script to open up a remote console, start/stop/restart the release, start in the background, send remote commands, and more. With from source installations you install Akkoma from source, meaning you have to install certain dependencies like Erlang+Elixir and compile Akkoma yourself. diff --git a/docs/installation/yunohost_en.md b/docs/installation/yunohost_en.md deleted file mode 100644 index 4c34e85d5..000000000 --- a/docs/installation/yunohost_en.md +++ /dev/null @@ -1,9 +0,0 @@ -# Installing on Yunohost - -[YunoHost](https://yunohost.org) is a server operating system aimed at self-hosting. The YunoHost community maintains a package of Pleroma which allows you to install Pleroma on YunoHost. You can install it via the normal way through the admin web interface, or through the CLI. More information can be found at [the repo of the package](https://github.com/YunoHost-Apps/pleroma_ynh). - -## Questions - -Questions and problems related to the YunoHost parts can be done through the [regular YunoHost channels](https://yunohost.org/en/help). - -For questions about Pleroma, ask in [#pleroma:libera.chat](https://matrix.to/#/#pleroma:libera.chat) via Matrix or **#pleroma** on **libera.chat** via IRC.