forked from AkkomaGang/akkoma
Update Alpine install guide (#49)
Reviewed-on: AkkomaGang/akkoma#49 Co-authored-by: norm <normandy@biribiri.dev> Co-committed-by: norm <normandy@biribiri.dev>
This commit is contained in:
parent
6dc5949c99
commit
fef48af31e
1 changed files with 37 additions and 35 deletions
|
@ -4,15 +4,17 @@
|
|||
|
||||
## Installation
|
||||
|
||||
This guide is a step-by-step installation guide for Alpine Linux. The instructions were verified against Alpine v3.10 standard image. You might miss additional dependencies if you use `netboot` instead.
|
||||
This guide is a step-by-step installation guide for Alpine Linux. The instructions were verified against Alpine v3.16 standard image. You might miss additional dependencies if you use `netboot` instead.
|
||||
|
||||
It assumes that you have administrative rights, either as root or a user with [sudo permissions](https://www.linode.com/docs/tools-reference/custom-kernels-distros/install-alpine-linux-on-your-linode/#configuration). If you want to run this guide with root, ignore the `sudo` at the beginning of the lines, unless it calls a user like `sudo -Hu akkoma`; in this case, use `su -l <username> -s $SHELL -c 'command'` instead.
|
||||
As of Alpine Linux v3.16, `doas` is the preferred way of running privileged commands, which is what this guide will use.
|
||||
If you are running an earlier version, replace `doas` with `sudo` (and use `sudo -Hu akkoma` instead of `doas -u akkoma`).
|
||||
If you want to run this guide with root, ignore the `doas` at the beginning of the lines, unless it calls a user like `doas -u akkoma`; in this case, use `su -l <username> -s $SHELL -c 'command'` instead.
|
||||
|
||||
{! backend/installation/generic_dependencies.include !}
|
||||
|
||||
### Prepare the system
|
||||
|
||||
* The community repository must be enabled in `/etc/apk/repositories`. Depending on which version and mirror you use this looks like `http://alpine.42.fr/v3.10/community`. If you autogenerated the mirror during installation:
|
||||
* The community repository must be enabled in `/etc/apk/repositories`. Depending on which version and mirror you use this looks like `https://dl-5.alpinelinux.org/alpine/v3.16/community`. If you autogenerated the mirror during installation:
|
||||
|
||||
```shell
|
||||
awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/repositories
|
||||
|
@ -21,14 +23,14 @@ awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/re
|
|||
* Then update the system, if not already done:
|
||||
|
||||
```shell
|
||||
sudo apk update
|
||||
sudo apk upgrade
|
||||
doas apk update
|
||||
doas apk upgrade
|
||||
```
|
||||
|
||||
* Install some tools, which are needed later:
|
||||
|
||||
```shell
|
||||
sudo apk add git build-base cmake file-dev
|
||||
doas apk add git build-base cmake file-dev
|
||||
```
|
||||
|
||||
### Install Elixir and Erlang
|
||||
|
@ -36,13 +38,13 @@ sudo apk add git build-base cmake file-dev
|
|||
* Install Erlang and Elixir:
|
||||
|
||||
```shell
|
||||
sudo apk add erlang erlang-runtime-tools erlang-xmerl elixir
|
||||
doas apk add erlang elixir
|
||||
```
|
||||
|
||||
* Install `erlang-eldap` if you want to enable ldap authenticator
|
||||
|
||||
```shell
|
||||
sudo apk add erlang-eldap
|
||||
doas apk add erlang-eldap
|
||||
```
|
||||
|
||||
### Install PostgreSQL
|
||||
|
@ -50,25 +52,25 @@ sudo apk add erlang-eldap
|
|||
* Install Postgresql server:
|
||||
|
||||
```shell
|
||||
sudo apk add postgresql postgresql-contrib
|
||||
doas apk add postgresql postgresql-contrib
|
||||
```
|
||||
|
||||
* Initialize database:
|
||||
|
||||
```shell
|
||||
sudo /etc/init.d/postgresql start
|
||||
doas rc-service postgresql start
|
||||
```
|
||||
|
||||
* Enable and start postgresql server:
|
||||
|
||||
```shell
|
||||
sudo rc-update add postgresql
|
||||
doas rc-update add postgresql
|
||||
```
|
||||
|
||||
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](../installation/optional/media_graphics_packages.md))
|
||||
|
||||
```shell
|
||||
sudo apk add ffmpeg imagemagick exiftool
|
||||
doas apk add ffmpeg imagemagick exiftool
|
||||
```
|
||||
|
||||
### Install AkkomaBE
|
||||
|
@ -76,18 +78,18 @@ sudo apk add ffmpeg imagemagick exiftool
|
|||
* Add a new system user for the Akkoma service:
|
||||
|
||||
```shell
|
||||
sudo addgroup akkoma
|
||||
sudo adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma
|
||||
doas addgroup akkoma
|
||||
doas adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma
|
||||
```
|
||||
|
||||
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
|
||||
**Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you don’t have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
|
||||
|
||||
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
|
||||
|
||||
```shell
|
||||
sudo mkdir -p /opt/akkoma
|
||||
sudo chown -R akkoma:akkoma /opt/akkoma
|
||||
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
|
||||
doas mkdir -p /opt/akkoma
|
||||
doas chown -R akkoma:akkoma /opt/akkoma
|
||||
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
|
||||
```
|
||||
|
||||
* Change to the new directory:
|
||||
|
@ -99,10 +101,10 @@ cd /opt/akkoma
|
|||
* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`:
|
||||
|
||||
```shell
|
||||
sudo -Hu akkoma mix deps.get
|
||||
doas -u akkoma mix deps.get
|
||||
```
|
||||
|
||||
* Generate the configuration: `sudo -Hu akkoma MIX_ENV=prod mix pleroma.instance gen`
|
||||
* Generate the configuration: `doas -u akkoma env MIX_ENV=prod mix pleroma.instance gen`
|
||||
* Answer with `yes` if it asks you to install `rebar3`.
|
||||
* This may take some time, because parts of akkoma get compiled first.
|
||||
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
|
||||
|
@ -110,25 +112,25 @@ sudo -Hu akkoma mix deps.get
|
|||
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
|
||||
|
||||
```shell
|
||||
sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}
|
||||
doas -u akkoma mv config/{generated_config.exs,prod.secret.exs}
|
||||
```
|
||||
|
||||
* The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
|
||||
|
||||
```shell
|
||||
sudo -Hu postgres psql -f config/setup_db.psql
|
||||
doas -u postgres psql -f config/setup_db.psql
|
||||
```
|
||||
|
||||
* Now run the database migration:
|
||||
|
||||
```shell
|
||||
sudo -Hu akkoma MIX_ENV=prod mix ecto.migrate
|
||||
doas -u akkoma env MIX_ENV=prod mix ecto.migrate
|
||||
```
|
||||
|
||||
* Now you can start Akkoma already
|
||||
|
||||
```shell
|
||||
sudo -Hu akkoma MIX_ENV=prod mix phx.server
|
||||
doas -u akkoma env MIX_ENV=prod mix phx.server
|
||||
```
|
||||
|
||||
### Finalize installation
|
||||
|
@ -140,20 +142,20 @@ If you want to open your newly installed instance to the world, you should run n
|
|||
* Install nginx, if not already done:
|
||||
|
||||
```shell
|
||||
sudo apk add nginx
|
||||
doas apk add nginx
|
||||
```
|
||||
|
||||
* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
|
||||
|
||||
```shell
|
||||
sudo apk add certbot
|
||||
doas apk add certbot
|
||||
```
|
||||
|
||||
and then set it up:
|
||||
|
||||
```shell
|
||||
sudo mkdir -p /var/lib/letsencrypt/
|
||||
sudo certbot certonly --email <your@emailaddress> -d <yourdomain> --standalone
|
||||
doas mkdir -p /var/lib/letsencrypt/
|
||||
doas certbot certonly --email <your@emailaddress> -d <yourdomain> --standalone
|
||||
```
|
||||
|
||||
If that doesn’t work, make sure, that nginx is not already running. If it still doesn’t work, try setting up nginx first (change ssl “on” to “off” and try again).
|
||||
|
@ -161,7 +163,7 @@ If that doesn’t work, make sure, that nginx is not already running. If it stil
|
|||
* Copy the example nginx configuration to the nginx folder
|
||||
|
||||
```shell
|
||||
sudo cp /opt/akkoma/installation/nginx/akkoma.nginx /etc/nginx/conf.d/akkoma.conf
|
||||
doas cp /opt/akkoma/installation/nginx/akkoma.nginx /etc/nginx/conf.d/akkoma.conf
|
||||
```
|
||||
|
||||
* Before starting nginx edit the configuration and change it to your needs. You must change change `server_name` and the paths to the certificates. You can use `nano` (install with `apk add nano` if missing).
|
||||
|
@ -187,14 +189,14 @@ server {
|
|||
* Enable and start nginx:
|
||||
|
||||
```shell
|
||||
sudo rc-update add nginx
|
||||
sudo service nginx start
|
||||
doas rc-update add nginx
|
||||
doas rc-service nginx start
|
||||
```
|
||||
|
||||
If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
|
||||
|
||||
```shell
|
||||
sudo certbot certonly --email <your@emailaddress> -d <yourdomain> --webroot -w /var/lib/letsencrypt/
|
||||
doas certbot certonly --email <your@emailaddress> -d <yourdomain> --webroot -w /var/lib/letsencrypt/
|
||||
```
|
||||
|
||||
#### OpenRC service
|
||||
|
@ -202,13 +204,13 @@ sudo certbot certonly --email <your@emailaddress> -d <yourdomain> --webroot -w /
|
|||
* Copy example service file:
|
||||
|
||||
```shell
|
||||
sudo cp /opt/akkoma/installation/init.d/akkoma /etc/init.d/akkoma
|
||||
doas cp /opt/akkoma/installation/init.d/akkoma /etc/init.d/akkoma
|
||||
```
|
||||
|
||||
* Make sure to start it during the boot
|
||||
|
||||
```shell
|
||||
sudo rc-update add akkoma
|
||||
doas rc-update add akkoma
|
||||
```
|
||||
|
||||
#### Create your first user
|
||||
|
@ -216,7 +218,7 @@ sudo rc-update add akkoma
|
|||
If your instance is up and running, you can create your first user with administrative rights with the following task:
|
||||
|
||||
```shell
|
||||
sudo -Hu akkoma MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
|
||||
doas -u akkoma env MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
|
||||
```
|
||||
|
||||
#### Further reading
|
||||
|
|
Loading…
Reference in a new issue