distraction.party/docs/installation/gentoo_en.md
2019-10-03 00:18:32 +03:00

15 KiB
Raw Blame History

Installing on Gentoo GNU/Linux

Installation

This guide will assume that you have administrative rights, either as root or a user with sudo permissions. Lines that begin with # indicate that they should be run as the superuser. Lines using $ should be run as the indicated user, e.g. pleroma$ should be run as the pleroma user.

Configuring your hostname (optional)

If you would like your prompt to permanently include your host/domain, change /etc/conf.d/hostname to your hostname. You can reboot or use the hostname command to make immediate changes.

Your make.conf, package.use, and USE flags

The only specific USE flag you should need is the uuid flag for dev-db/postgresql. Add the following line to any new file in /etc/portage/package.use. If you would like a suggested name for the file, either postgresql or pleroma would do fine, depending on how you like to arrange your package.use flags.

dev-db/postgresql uuid

You could opt to add USE="uuid" to /etc/portage/make.conf if you'd rather set this as a global USE flags, but this flags does unrelated things in other packages, so keep that in mind if you elect to do so.

Double check your compiler flags in /etc/portage/make.conf. If you require any special compilation flags or would like to set up remote builds, now is the time to do so. Be sure that your CFLAGS and MAKEOPTS make sense for the platform you are using. It is not recommended to use above -O2 or risky optimization flags for a production server.

Installing a cron daemon

Gentoo quite pointedly does not come with a cron daemon installed, and as such it is recommended you install one to automate certbot renewals and to allow other system administration tasks to be run automatically. Gentoo has a whole wide world of cron options but if you just want A Cron That Works, emerge --ask virtual/cron will install the default cron implementation (probably cronie) which will work just fine. For the purpouses of this guide, we will be doing just that.

Required ebuilds

  • dev-db/postgresql
  • dev-lang/elixir
  • dev-vcs/git

Optional ebuilds used in this guide

  • www-servers/nginx (preferred, example configs for other reverse proxies can be found in the repo)
  • app-crypt/certbot (or any other ACME client for Lets Encrypt certificates)
  • app-crypt/certbot-nginx (nginx certbot plugin that allows use of the all-powerful --nginx flag on certbot)

Prepare the system

  • First ensure that you have the latest copy of the portage ebuilds if you have not synced them yet:
 # emaint sync -a
  • Emerge all required the required and suggested software in one go:
 # emerge --ask dev-db/postgresql dev-lang/elixir dev-vcs/git www-servers/nginx app-crypt/certbot app-crypt/certbot-nginx

If you would not like to install the optional packages, remove them from this line.

If you're running this from a low-powered virtual machine, it should work though it will take some time. There were no issues on a VPS with a single core and 1GB of RAM; if you are using an even more limited device and run into issues, you can try creating a swapfile or use a more powerful machine running Gentoo to cross build. If you have a wait ahead of you, now would be a good time to take a break, strech a bit, refresh your beverage of choice and/or get a snack, and reply to Arch users' posts with "I use Gentoo btw" as we do.

Install PostgreSQL

Gentoo Wiki article as well as PostgreSQL QuickStart might be worth a quick glance, as the way Gentoo handles postgres is slightly unusual, with built in capability to have two different databases running for testing and live or whatever other purpouse. While it is still straightforward to install, it does mean that the version numbers used in this guide might change for future updates, so keep an eye out for the output you get from emerge to ensure you are using the correct ones.

  • Install postgresql if you have not done so already:
 # emerge --ask dev-db/postgresql

Ensure that /etc/conf.d/postgresql-11 has the encoding you want (it defaults to UTF8 which is probably what you want) and make any adjustments to the data directory if you find it necessary. Be sure to adjust the number at the end depending on what version of postgres you actually installed.

  • Initialize the database cluster

The output from emerging postgresql should give you a command for initializing the postgres database. The default slot should be indicated in this command, ensure that it matches the command below.

 # emerge --config dev-db/postgresql:11
  • Start postgres and enable the system service
 # /etc/init.d/postgresql-11 start
 # rc-update add postgresql-11 default

A note on licenses, the AGPL, and deployment procedures

If you do not plan to make any modifications to your Pleroma instance, cloning directly from the main repo will get you what you need. However, if you plan on doing any contributions to upstream development, making changes or modifications to your instance, making custom themes, or want to play around--and let's be honest here, if you're using Gentoo that is most likely you--you will save yourself a lot of headache later if you take the time right now to fork the Pleroma repo and use that in the following section.

Not only does this make it much easier to deploy changes you make, as you can commit and pull from upstream and all that good stuff from the comfort of your local machine then simply git pull on your instance server when you're ready to deploy, it also ensures you are compliant with the Affero General Public Licence that Pleroma is licenced under, which stipulates that all network services provided with modified AGPL code must publish their changes on a publicly available internet service and for free. It also makes it much easier to ask for help from and provide help to your fellow Pleroma admins if your public repo always reflects what you are running because it is part of your deployment procedure.

Install PleromaBE

  • Add a new system user for the Pleroma service and set up default directories:

Remove ,wheel if you do not want this user to be able to use sudo, however note that being able to sudo as the pleroma user will make finishing the insallation and common maintenence tasks somewhat easier:

 # useradd -m -G users,wheel -s /bin/bash pleroma

Optional: If you are using sudo, review your sudo setup to ensure it works for you. The /etc/sudoers file has a lot of options and examples to help you, and the Gentoo sudo guide has more information. Finishing this installation will be somewhat easier if you have a way to sudo from the pleroma user, but it might be best to not allow that user to sudo during normal operation, and as such there will be a reminder at the end of this guide to double check if you would like to lock down the pleroma user after initial setup.

Note: To execute a single command as the Pleroma system user, use sudo -Hu pleroma command. You can also switch to a shell by using sudo -Hu pleroma $SHELL. If you don't have or want sudo or would like to use the system as the pleroma user for instance maintenance tasks, you can simply use su - pleroma to switch to the pleroma user.

  • Git clone the PleromaBE repository and make the Pleroma user the owner of the directory:

It is highly recommended you use your own fork for the https://path/to/repo part below, however if you foolishly decide to forego using your own fork, the primary repo https://git.pleroma.social/pleroma/pleroma will work here.

 pleroma$ cd ~
 pleroma$ git clone -b master https://path/to/repo
  • Change to the new directory:
pleroma$ cd ~/pleroma
  • Install the dependencies for Pleroma and answer with yes if it asks you to install Hex:
pleroma$ mix deps.get
  • Generate the configuration:
pleroma$ mix pleroma.instance gen
  • Answer with yes if it asks you to install rebar3.

  • This part precompiles some parts of Pleroma, so it might take a few moments

  • After that it will ask you a few questions about your instance and generates a configuration file in config/generated_config.exs.

  • Spend some time with generated_config.exs to ensure that everything is in order. If you plan on using an S3-compatible service to store your local media, that can be done here. You will likely mostly be using prod.secret.exs for a production instance, however if you would like to set up a development environment, make a copy to dev.secret.exs and adjust settings as needed as well.

pleroma$ mv config/generated_config.exs config/prod.secret.exs
  • The previous command creates also the file config/setup_db.psql, with which you can create the database. Ensure that it is using the correct database name on the CREATE DATABASE and the \c lines, then run the postgres script:
pleroma$ sudo -Hu postgres psql -f config/setup_db.psql
  • Now run the database migration:
pleroma$ MIX_ENV=prod mix ecto.migrate
  • Now you can start Pleroma already
pleroma$ MIX_ENV=prod mix phx.server

It probably won't work over the public internet quite yet, however, as we still need to set up a web servere to proxy to the pleroma application, as well as configure SSL.

Finalize installation

Assuming you want to open your newly installed federated social network to, well, the federation, you should run nginx or some other webserver/proxy in front of Pleroma. It is also a good idea to set up Pleroma to run as a system service.

Nginx

  • Install nginx, if not already done:
 # emerge --ask www-servers/nginx
  • Create directories for available and enabled sites:
 # mkdir -p /etc/nginx/sites-{available,enabled}
  • Append the following line at the end of the http block in /etc/nginx/nginx.conf:
include sites-enabled/*;
  • Setup your SSL cert, using your method of choice or certbot. If using certbot, install it if you haven't already:
 # emerge --ask app-crypt/certbot app-crypt/certbot-nginx

and then set it up:

 # mkdir -p /var/lib/letsencrypt/
 # certbot certonly --email <your@emailaddress> -d <yourdomain> --standalone

If that doesn't work the first time, add --dry-run to further attempts to avoid being ratelimited as you identify the issue, and do not remove it until the dry run succeeds. If that doesnt work, make sure, that nginx is not already running. If it still doesnt work, try setting up nginx first (change ssl “on” to “off” and try again). Often the answer to issues with certbot is to use the --nginx flag once you have nginx up and running.

If you are using any additional subdomains, such as for a media proxy, you can re-run the same command with the subdomain in question. When it comes time to renew later, you will not need to run multiple times for each domain, one renew will handle it.


  • Copy the example nginx configuration and activate it:
 # cp /home/pleroma/pleroma/installation/pleroma.nginx /etc/nginx/sites-available/
 # ln -s /etc/nginx/sites-available/pleroma.nginx /etc/nginx/sites-enabled/pleroma.nginx
  • Take some time to ensure that your nginx config is correct

Replace all instances of example.tld with your instance's public URL. If for whatever reason you made changes to the port that your pleroma app runs on, be sure that is reflected in your configuration.

Pay special attention to the line that begins with ssl_ecdh_curve. It is stongly advised to comment that line out so that OpenSSL will use its full capabilities, and it is also possible you are running OpenSSL 1.0.2 necessitating that you do this.

  • Enable and start nginx:
 # rc-update add nginx default
 # /etc/init.d/nginx start

If you are using certbot, it is HIGHLY recommend you set up a cron job that renews your certificate, and that you install the suggested certbot-nginx plugin. If you don't do these things, you only have yourself to blame when your instance breaks suddenly because you forgot about it.

First, ensure that the command you will be installing into your crontab works.

 # /usr/bin/certbot renew --nginx

Assuming not much time has passed since you got certbot working a few steps ago, you should get a message for all domains you installed certificates for saying Cert not yet due for renewal.

Now, run crontab as a superuser with crontab -e or sudo crontab -e as appropriate, and add the following line to your cron:

0 0 1 * * /usr/bin/certbot renew --nginx

This will run certbot on the first of the month at midnight. If you'd rather run more frequently, it's not a bad idea, feel free to go for it.

Other webserver/proxies

If you would like to use other webservers or proxies, there are example configurations for some popular alternatives in /home/pleroma/pleroma/installation/. You can, of course, check out the Gentoo wiki for more information on installing and configuring said alternatives.

Create the uploads folder

Even if you are using S3, Pleroma needs someplace to store media posted on your instance. If you are using the /home/pleroma/pleroma root folder suggested by this guide, simply:

 pleroma$ mkdir -p ~/pleroma/uploads

init.d service

  • Copy example service file
 # cp /home/pleroma/pleroma/installation/init.d/pleroma /etc/init.d/
  • Be sure to take a look at this service file and make sure that all paths fit your installation

  • Enable and start pleroma:

 # rc-update add pleroma default
 # /etc/init.d/pleroma start

Create your first user

If your instance is up and running, you can create your first user with administrative rights with the following task:

pleroma$ MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin

Privilege cleanup

If you opted to allow sudo for the pleroma user but would like to remove the ability for greater security, now might be a good time to edit /etc/sudoers and/or change the groups the pleroma user belongs to. Be sure to restart the pleroma service afterwards to ensure it picks up on the changes.

Further reading

Questions

Questions about the installation or didnt it work as it should be, ask in #pleroma:matrix.org or IRC Channel #pleroma on Freenode.