akkoma/docs/installation/alpine_linux_en.md

228 lines
6.3 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Installing on Alpine Linux
{! backend/installation/otp_vs_from_source_source.include !}
## Installation
This guide is a step-by-step installation guide for Alpine Linux. The instructions were verified against Alpine v3.16 standard image. You might miss additional dependencies if you use `netboot` instead.
As of Alpine Linux v3.16, `doas` is the preferred way of running privileged commands, which is what this guide will use.
If you are running an earlier version, replace `doas` with `sudo` (and use `sudo -Hu akkoma` instead of `doas -u akkoma`).
If you want to run this guide with root, ignore the `doas` at the beginning of the lines, unless it calls a user like `doas -u akkoma`; in this case, use `su -l <username> -s $SHELL -c 'command'` instead.
{! backend/installation/generic_dependencies.include !}
### Prepare the system
* The community repository must be enabled in `/etc/apk/repositories`. Depending on which version and mirror you use this looks like `https://dl-5.alpinelinux.org/alpine/v3.16/community`. If you autogenerated the mirror during installation:
```shell
awk 'NR==2' /etc/apk/repositories | sed 's/main/community/' | tee -a /etc/apk/repositories
```
* Then update the system, if not already done:
```shell
doas apk update
doas apk upgrade
```
* Install some tools, which are needed later:
```shell
doas apk add git build-base cmake file-dev
```
### Install Elixir and Erlang
* Install Erlang and Elixir:
```shell
doas apk add erlang elixir
```
* Install `erlang-eldap` if you want to enable ldap authenticator
```shell
doas apk add erlang-eldap
```
### Install PostgreSQL
* Install Postgresql server:
```shell
doas apk add postgresql postgresql-contrib
```
* Initialize database:
```shell
doas rc-service postgresql start
```
* Enable and start postgresql server:
```shell
doas rc-update add postgresql
```
### Install media / graphics packages (optional, see [`docs/installation/optional/media_graphics_packages.md`](../installation/optional/media_graphics_packages.md))
```shell
doas apk add ffmpeg imagemagick exiftool
```
### Install AkkomaBE
* Add a new system user for the Akkoma service:
```shell
doas addgroup akkoma
doas adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma
```
**Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you dont have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
```shell
doas mkdir -p /opt/akkoma
doas chown -R akkoma:akkoma /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
```
* Change to the new directory:
```shell
cd /opt/akkoma
```
* Install the dependencies for Akkoma and answer with `yes` if it asks you to install `Hex`:
```shell
doas -u akkoma mix deps.get
```
* Generate the configuration: `doas -u akkoma env MIX_ENV=prod mix pleroma.instance gen`
* Answer with `yes` if it asks you to install `rebar3`.
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
```shell
doas -u akkoma mv config/{generated_config.exs,prod.secret.exs}
```
* The previous command creates also the file `config/setup_db.psql`, with which you can create the database:
```shell
doas -u postgres psql -f config/setup_db.psql
```
* Now run the database migration:
```shell
doas -u akkoma env MIX_ENV=prod mix ecto.migrate
```
* Now you can start Akkoma already
```shell
doas -u akkoma env MIX_ENV=prod mix phx.server
```
### Finalize installation
If you want to open your newly installed instance to the world, you should run nginx or some other webserver/proxy in front of Akkoma and you should consider to create an OpenRC service file for Akkoma.
#### Nginx
* Install nginx, if not already done:
```shell
doas apk add nginx
```
* Setup your SSL cert, using your method of choice or certbot. If using certbot, first install it:
```shell
doas apk add certbot
```
and then set it up:
```shell
doas mkdir -p /var/lib/letsencrypt/
doas certbot certonly --email <your@emailaddress> -d <yourdomain> --standalone
```
If that doesnt work, make sure, that nginx is not already running. If it still doesnt work, try setting up nginx first (change ssl “on” to “off” and try again).
* Copy the example nginx configuration to the nginx folder
```shell
doas cp /opt/akkoma/installation/nginx/akkoma.nginx /etc/nginx/conf.d/akkoma.conf
```
* Before starting nginx edit the configuration and change it to your needs. You must change change `server_name` and the paths to the certificates. You can use `nano` (install with `apk add nano` if missing).
```
server {
server_name your.domain;
listen 80;
...
}
server {
server_name your.domain;
listen 443 ssl http2;
...
ssl_trusted_certificate /etc/letsencrypt/live/your.domain/chain.pem;
ssl_certificate /etc/letsencrypt/live/your.domain/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/your.domain/privkey.pem;
...
}
```
* Enable and start nginx:
```shell
doas rc-update add nginx
doas rc-service nginx start
```
If you need to renew the certificate in the future, uncomment the relevant location block in the nginx config and run:
```shell
doas certbot certonly --email <your@emailaddress> -d <yourdomain> --webroot -w /var/lib/letsencrypt/
```
#### OpenRC service
* Copy example service file:
```shell
doas cp /opt/akkoma/installation/init.d/akkoma /etc/init.d/akkoma
```
* Make sure to start it during the boot
```shell
doas rc-update add akkoma
```
#### Create your first user
If your instance is up and running, you can create your first user with administrative rights with the following task:
```shell
doas -u akkoma env MIX_ENV=prod mix pleroma.user new <username> <your@emailaddress> --admin
```
#### Further reading
{! backend/installation/further_reading.include !}
{! backend/support.include !}