Currently logic unconditionally adds public adressing to "cc"
and follower adressing to "to" after attempting to strip it
from the other one. This is horrible for two reasons:
First the bug prompting this investigation and fix,
this creates duplicates when adressing URIs already
were in their intended final field; e.g. prominently
the case for all "unlisted" posts.
Since List.delete only removes the first occurence,
this then broke follower-adress stripping later on.
It’s also not safe in general wrt to non-public adressing:
e.g. pre-existing duplicates didn’t get fully stripped,
bespoke adressing modes with only one of public addressing
or follower addressing — and most importantly:
any belatedly received DM also got public adressing added!
Shockingly this last point was actually checked as "correct" in tests
albeit this appears to be a mistake from mindless match adjustments
from when genuine crashes on nil adressing lists got fixed in
10c792110e.
Clean up this sloppy logic up, making sure all instances of relevant
adresses are purged and only readded when they actually existed to begin
with. To avoid problems with any List.delete usages remaining in other
places, also ensure we never create duplicate entries.
Current AP spec demands anonymous objects to have an id value,
but explicitly set it to JSON null. Howeveras it turns out this is
incompatible with JSON-LD requiring `@id` to be a string and thus AP
spec is incompatible iwth the Ativity Streams spec it is based on.
This is an issue for (the few) AP implementers actually performing
JSON-LD processing, like IceShrimp.NET.
This was uncovered by IceShrimp.NET’s zotan due to our adoption of
anonymous objects for emoj in f101886709.
The issues is being discussed by W3C, and will most likely be resolved
via an errata redefining anonymous objects to completely omit the id
field just like transient objects already do. See:
https://github.com/w3c/activitypub/issues/476
Fixes: AkkomaGang/akkoma#848
Mastodon API demands this be null unless it’s a multi-selection poll.
Not abiding by this can mess up display in some clients.
Fixes: AkkomaGang/akkoma#190
Currently `mix test` prints a slew of logs in the terminal
with messages from different tests intermsparsed. Globally
enabling capture log hides log messages unless a test fails
reducing noise and making it easier to anylse the important
(from failed tests) messages.
Compiler warnings and a few messages not printed via Logger
still show up but its much more readable than before.
Ported from: 3aed111a42
Usually an id should point to another AP object
and the image file isn’t an AP object. We currently
do not provide standalone AP objects for emoji and
don't keep track of remote emoji at all.
Thus just federate them as anonymous objects,
i.e. objects only existing within a parent context
and using an explicit null id.
IceShrimp.NET previously adopted anonymous objects
for remote emoji without any apparent issues. See:
333611f65e
Fixes: AkkomaGang/akkoma#694
Trying to display non-media as media crashed the renderer,
but when posting a status with a valid, non-media object id
the post was still created, but then crashed e.g. timeline rendering.
It also crashed C2S inbox reads, so this could not be used to leak
private posts.
In Mastodon media can only be used by owners and only be associated with
a single post. We currently allow media to be associated with several
posts and until now did not limit their usage in posts to media owners.
However, media update and GET lookup was already limited to owners.
(In accordance with allowing media reuse, we also still allow GET
lookups of media already used in a post unlike Mastodon)
Allowing reuse isn’t problematic per se, but allowing use by non-owners
can be problematic if media ids of private-scoped posts can be guessed
since creating a new post with this media id will reveal the uploaded
file content and alt text.
Given media ids are currently just part of a sequentieal series shared
with some other objects, guessing media ids is with some persistence
indeed feasible.
E.g. sampline some public media ids from a real-world
instance with 112 total and 61 monthly-active users:
17.465.096 at t0
17.472.673 at t1 = t0 + 4h
17.473.248 at t2 = t1 + 20min
This gives about 30 new ids per minute of which most won't be
local media but remote and local posts, poll answers etc.
Assuming the default ratelimit of 15 post actions per 10s, scraping all
media for the 4h interval takes about 84 minutes and scraping the 20min
range mere 6.3 minutes. (Until the preceding commit, post updates were
not rate limited at all, allowing even faster scraping.)
If an attacker can infer (e.g. via reply to a follower-only post not
accessbile to the attacker) some sensitive information was uploaded
during a specific time interval and has some pointers regarding the
nature of the information, identifying the specific upload out of all
scraped media for this timerange is not impossible.
Thus restrict media usage to owners.
Checking ownership just in ActivitDraft would already be sufficient,
since when a scheduled status actually gets posted it goes through
ActivityDraft again, but would erroneously return a success status
when scheduling an illegal post.
Independently discovered and fixed by mint in Pleroma
1afde067b1
In MastoAPI media descriptions are updated via the
media update API not upon post creation or post update.
This functionality was originally added about 6 years ago in
ba93396649 which was part of
https://git.pleroma.social/pleroma/pleroma/-/merge_requests/626 and
https://git.pleroma.social/pleroma/pleroma-fe/-/merge_requests/450.
They introduced image descriptions to the front- and backend,
but predate adoption of Mastodon API.
For a while adding an `descriptions` array on post creation might have
continued to work as an undocumented Pleroma extension to Masto API, but
at latest when OpenAPI specs were added for those endpoints four years
ago in 7803a85d2c, these codepaths ceased
to be used. The API specs don’t list a `descriptions` parameter and
any unknown parameters are stripped out.
The attachments_from_ids function is only called from
ScheduledActivity and ActivityDraft.create with the latter
only being called by CommonAPI.{post,update} whihc in turn
are only called from ScheduledActivity again, MastoAPI controller
and without any attachment or description parameter WelcomeMessage.
Therefore no codepath can contain a descriptions parameter.
Due to JSON-LD compaction the full address of public scope
may also occur in shorter forms and the spec requires us to treat them
all equivalently. To save us the pain of repeatedly checking for all
variants internally, normalise inbound data to just one form.
See note at: https://www.w3.org/TR/activitypub/#public-addressing
This needs to happen very early, even before the other addressing fixes
else an earlier validator will reject the object. This in turn required
to move the list-tpye normalisation earlier as well, but since I was
unsure about putting empty lists into the data when no such field
existed before, I excluded this case and thus the later fixing had to be
kept as well.
Fixes: AkkomaGang/akkoma#670
