This make the behavior consistent between when UserNote doesn't exist and when comment is null.
The current behavior may return null in APIs, which misleads some clients doing feature detection into thinking the server does not support comments.
For example, see https://codeberg.org/husky/husky/issues/92
weird values in href will cause base64 encoding to fail later down the
line, so let's make sure the value we're passing on is somewhat sane, or
at the very least a binary
this fixes#482
When no image description is filled in, Pleroma allowed fallbacks.
Those were (based on a setting) either the filename, or a fixed description.
Neither are good options for image descriptions imo, so here we remove this.
Note that there's two tests removed who supposedly tested something else.
But examining closer, they didn't seem to test what they claimed to test,
so I removed them rather than try to "fix" them.
Expose quote posting in the api as a feature.
Copies what the quote post PR for pleroma does to allow external clients to enable and disable features based on the feature-set of the instance.
As far as I am aware, akkoma doesn't allow you to disable quote posting, so this doesn't need anything fancy and it's just a hard on switch.
I tried to get one for the bubble tl to work also, but I'm not quite sure how to do it so that it switches off the feature when the bubble tl is disabled. I would argue that it could and ideally should be done as well though.
I also discovered a pretty tame bug in the testing of it, that deleting the DB entry for the bubble tl does not stop the bubble TL from actually working and it will continue to display the panel on the about page, I'll just leave it as a note here.
Reviewed-on: AkkomaGang/akkoma#496
Co-authored-by: foxing <foxing@noreply.akkoma>
Co-committed-by: foxing <foxing@noreply.akkoma>
Some users post posts with spoofed timestamp, and some clients will have issues with certain dates. Tusky for example crashes if the date is any sooner than 1 BCE (“year zero” in the representation).
I limited the range of what is considered a valid date to be somewhere between the years 1583 and 9999 (inclusive).
The numbers have been chosen because:
- ISO 8601 only allows years before 1583 with “mutual agreement”
- Years after 9999 could cause issues with certain clients as well
Co-authored-by: Charlotte 🦝 Delenk <lotte@chir.rs>
Reviewed-on: AkkomaGang/akkoma#425
Co-authored-by: darkkirb <lotte@chir.rs>
Co-committed-by: darkkirb <lotte@chir.rs>
Faced with this issue today, Pleroma responds with status 400 (Bad request) if Exiftool.StripLocation is added to the list of filter modules for uploads. Here is logs:
```
13:27:25.201 [info] POST /api/v1/media
13:27:25.232 request_id=FzdspaAnrA6cyv0APgVR [error] Elixir.Pleroma.Upload.Filter: Filter Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation failed: {:error, "Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation: %ErlangError{original: :enoent}"}
13:27:25.232 request_id=FzdspaAnrA6cyv0APgVR [error] Elixir.Pleroma.Upload store (using Pleroma.Uploaders.Local) failed: "Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation: %ErlangError{original: :enoent}"
```
# This fix solves this problem.
Reviewed-on: AkkomaGang/akkoma#421
Co-authored-by: ihor <ikandreew@gmail.com>
Co-committed-by: ihor <ikandreew@gmail.com>
See AkkomaGang/akkoma#350 (comment)
When making quotes through Mast-API, they will now have the same context as the quoted post. This also results in them being showed when fetching the thread. I checked Misskey to see how it's there, and they show the quotes there as well, see e.g. <https://mk.toast.cafe/notes/98u1g0tulg>.
An example from Akkoma:
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: AkkomaGang/akkoma#379
Reviewed-by: floatingghost <hannah@coffee-and-dreams.uk>
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
Argos Translate is a Python module for translation and can be used as a command line tool.
This is also the engine for LibreTranslate, for which we already have a module.
Here we can use the engine directly from our server without doing requests to a third party or having to install our own LibreTranslate webservice (obviously you do have to install Argos Translate).
One thing that's currently still missing from Argos Translate is auto-detection of languages (see <https://github.com/argosopentech/argos-translate/issues/9>). For now, when no source language is provided, we just return the text unchanged, supposedly translated from the target language. That way you get a near immediate response in pleroma-fe when clicking Translate, after which you can select the source language from a dropdown.
Argos Translate also doesn't seem to handle html very well. Therefore we give admins the option to strip the html before translating. I made this an option because I'm unsure if/how this will change in the future.
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: AkkomaGang/akkoma#351
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
this didn't actually _do_ anything in the past,
the users would be prevented from accessing the resource,
but they shouldn't be able to even create them
Until now it was returning a 500 because the upload plug were going
through the changeset and ending in the JSON encoder, which raised
because struct has to @derive the encoder.
Objects who got updated would just pass through several of the MRF policies, undoing moderation in some situations.
In the relevant cases we now check not only for Create activities, but also Update activities.
I checked which ones checked explicitly on type Create using `grep '"type" => "Create"' lib/pleroma/web/activity_pub/mrf/*`.
The following from that list have not been changed:
* lib/pleroma/web/activity_pub/mrf/follow_bot_policy.ex
* Not relevant for moderation
* lib/pleroma/web/activity_pub/mrf/keyword_policy.ex
* Already had a test for Update
* lib/pleroma/web/activity_pub/mrf/object_age_policy.ex
* In practice only relevant when fetching old objects (e.g. through Like or Announce). These are always wrapped in a Create.
* lib/pleroma/web/activity_pub/mrf/reject_non_public.ex
* We don't allow changing scope with Update, so not relevant here
Objects who got updated would just pass the TagPolicy, undoing the moderation that was set in place for the Actor.
Now we check not only for Create activities, but also Update activities.
makes static-fe look more like pleroma-fe, with the stylesheets matching pleroma-dark and pleroma-light based on `prefers-color-scheme`.
- [x] navbar
- [x] about sidebar
- [x] background image
- [x] statuses
- [x] "reply to" or "edited" tags
- [x] accounts
- [x] show more / show less
- [x] posts / with replies / media / followers / following
- [x] followers/following would require user card snippets
- [x] admin/bot indicators
- [x] attachments
- [x] nsfw attachments
- [x] fontawesome icons
- [x] clean up and sort css
- [x] add pleroma-light
- [x] replace hardcoded strings
also i forgot
- [x] repeated headers
how it looks + sneak peek at statuses:
Co-authored-by: Sol Fisher Romanoff <sol@solfisher.com>
Reviewed-on: AkkomaGang/akkoma#236
Co-authored-by: sfr <sol@solfisher.com>
Co-committed-by: sfr <sol@solfisher.com>
a bunch of ways to get query plans to help with debugging
Co-authored-by: FloatingGhost <hannah@coffee-and-dreams.uk>
Reviewed-on: AkkomaGang/akkoma#348
Only real change here is making MRF rejects log as debug instead of info (AkkomaGang/akkoma#234)
I don't know if it's the best way to do it, but it seems it's just MRF using this and almost always this is intended.
The rest are just minor docs changes and syncing the restricted nicknames stuff.
I compiled and ran my changes with Docker and they all work.
Co-authored-by: r3g_5z <june@terezi.dev>
Reviewed-on: AkkomaGang/akkoma#313
Co-authored-by: @r3g_5z@plem.sapphic.site <june@girlboss.ceo>
Co-committed-by: @r3g_5z@plem.sapphic.site <june@girlboss.ceo>
Close#304.
Notes:
- This patch was made on top of Pleroma develop, so I created a separate cachex worker for request signature actions, instead of Akkoma's instance cache. If that is a merge blocker, I can attempt to move logic around for that.
- Regarding the `has_request_signatures: true -> false` state transition: I think that is a higher level thing (resetting instance state on new instance actor key) which is separate from the changes relevant to this one.
Co-authored-by: Luna <git@l4.pm>
Reviewed-on: AkkomaGang/akkoma#312
Co-authored-by: @luna@f.l4.pm <akkoma@l4.pm>
Co-committed-by: @luna@f.l4.pm <akkoma@l4.pm>
Changes follow_operation schema to use BooleanLike instead of :boolean so that strings like "0" and "1" (used by mastodon.py) can be accepted. Rest of file uses the same. For more info please see https://git.pleroma.social/pleroma/pleroma/-/issues/2999
(I'm also sending this here as I'm not hopeful about upstream not ignoring it)
Co-authored-by: ave <ave@ave.zone>
Reviewed-on: AkkomaGang/akkoma#301
Co-authored-by: ave <ave@noreply.akkoma>
Co-committed-by: ave <ave@noreply.akkoma>
- Drop Expect-CT
Expect-CT has been redundant since 2018 when Certificate Transparency became mandated and required for all CAs and browsers. This header is only implemented in Chrome and is now deprecated. HTTP header analysers do not check this anymore as this is enforced by default. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Expect-CT
- Raise HSTS to 2 years and explicitly preload
The longer age for HSTS, the better. Header analysers prefer 2 years over 1 year now as free TLS is very common using Let's Encrypt.
For HSTS to be fully effective, you need to submit your root domain (domain.tld) to https://hstspreload.org. However, a requirement for this is the "preload" directive in Strict-Transport-Security. If you do not have "preload", it will reject your domain.
- Drop X-Download-Options
This is an IE8-era header when Adobe products used to use the IE engine for making outbound web requests to embed webpages in things like Adobe Acrobat (PDFs). Modern apps are using Microsoft Edge WebView2 or Chromium Embedded Framework. No modern browser checks or header analyser check for this.
- Set base-uri to 'none'
This is to specify the domain for relative links (`<base>` HTML tag). pleroma-fe does not use this and it's an incredibly niche tag.
I use all of these myself on my instance by rewriting the headers with zero problems. No breakage observed.
I have not compiled my Elixr changes, but I don't see why they'd break.
Co-authored-by: r3g_5z <june@terezi.dev>
Reviewed-on: AkkomaGang/akkoma#294
Co-authored-by: @r3g_5z@plem.sapphic.site <june@terezi.dev>
Co-committed-by: @r3g_5z@plem.sapphic.site <june@terezi.dev>
The header name was Report-To, not Reply-To.
In any case, that's now being changed to the Reporting-Endpoints HTTP
Response Header.
https://w3c.github.io/reporting/#headerhttps://github.com/w3c/reporting/issues/177
CanIUse says the Report-To header is still supported by current Chrome
and friends.
https://caniuse.com/mdn-http_headers_report-to
It doesn't have any data for the Reporting-Endpoints HTTP header, but
this article says Chrome 96 supports it.
https://web.dev/reporting-api/
(Even though that's come out one year ago, that's not compatible with
Network Error Logging which's still using the Report-To version of the
API)
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
Simple fix for LDAP user registration. I'm not sure what changed but I managed to get Akkoma running in a debug session and figured out it was missing a match for an extra value at the end. I don't know Elixir all that well so I'm not sure if this was the correct way to do it... but it works. :)
Reviewed-on: AkkomaGang/akkoma#229
Co-authored-by: nullobsi <me@nullob.si>
Co-committed-by: nullobsi <me@nullob.si>
During attachment upload Pleroma returns a "description" field.
* This MR allows Pleroma to read the EXIF data during upload and return the description to the FE using this field.
* If a description is already present (e.g. because a previous module added it), it will use that
* Otherwise it will read from the EXIF data. First it will check -ImageDescription, if that's empty, it will check -iptc:Caption-Abstract
* If no description is found, it will simply return nil, which is the default value
* When people set up a new instance, they will be asked if they want to read metadata and this module will be activated if so
There was an Exiftool module, which has now been renamed to Exiftool.StripLocation
The problem was double. On the one hand, the function didn't actually return what was in the DB.
On the other hand the test was flaky because it used NaiveDateTime.utc_now() so test could fail or pass depending on a difference of microseconds.
Both are fixed now.
Pulled from https://git.pleroma.social/pleroma/pleroma/-/merge_requests/3721.
This makes backups require its own scope (`read:backups`) instead of the `read:accounts` scope.
Co-authored-by: Tusooa Zhu <tusooa@kazv.moe>
Reviewed-on: AkkomaGang/akkoma#218
Co-authored-by: Norm <normandy@biribiri.dev>
Co-committed-by: Norm <normandy@biribiri.dev>
As this plug is called on every request, this should reduce load on the
database by not requiring to select on the users table every single
time, and to instead use the by-ID user cache whenever possible.
This fixes a race condition bug where keys could be regenerated
post-federation, causing activities and HTTP signatures from an user to
be dropped due to key differences.
Non-Create/Listen activities had their associated object field
normalized and fetched, but only to use their `id` field, which is both
slow and redundant. This also failed on Undo activities, which delete
the associated object/activity in database.
Undo activities will now render properly and database loads should
improve ever so slightly.
Use Websockex to replace websocket_client
Test that server will disconnect websocket upon token revocation
Lint
Execute session disconnect in background
Refactor streamer test
allow multi-streams
rebase websocket change
This field replaces the now deprecated conversation_id field, and now
exposes the ActivityPub object `context` directly via the MastoAPI
instead of relying on StatusNet-era data concepts.
This field seems to be a left-over from the StatusNet era.
If your application uses `pleroma.conversation_id`: this field is
deprecated.
It is currently stubbed instead by doing a CRC32 of the context, and
clearing the MSB to avoid overflow exceptions with signed integers on
the different clients using this field (Java/Kotlin code, mostly; see
Husky and probably other mobile clients.)
This should be removed in a future version of Pleroma. Pleroma-FE
currently depends on this field, as well.
Incoming Pleroma replies to a Misskey thread were rejected due to a
broken context fix, which caused them to not be visible until a
non-Pleroma user interacted with the replies.
This fix properly sets the post-fix object context to its parent Create
activity as well, if it was changed.
