Currently our own frontend doesn’t show backgrounds of other users, this
property is already publicly readable via REST API and likely was always
intended to be shown and federated.
Recently Sharkey added support for profile backgrounds and
immediately made them federate and be displayed to others.
We use the same AP field as Sharkey here which should make
it interoperable both ways out-of-the-box.
Ref.: 4e64397635
Fixes misspelling and omission of and example in commit
0cfd5b4e89 which added the
status_ttl_property. This was the only place this commit
referred to the property as note_ttl_days.
Partially fixes the omitted schema update of the instance metadata addition
from commit b7e8ce2350. A proper full schema
for nodeinfo is still missing.
OTP’s default SSL/TLS settings are rather restricitive
and in particular do not use system CA certs.
In our case using system CA certs is virtually always desired
and the lack of it leads to non-obvious errors. Manually configuring
system CA certs from in-database config also isn’t straightforward.
Furthermore, gen_smtp uses a different set of connection options
for direct SSL/TLS and a later TLS upgrade providing additional
confusion and complexity in how to configure this.
Thus provide some suitable defaults for sending SMTP emails.
Everything can still be overriden by admins if necessary.
Note: defaults are not appended when validating the config
in hopes of improving the error message (as the required relay key
is already accessed to generate defaults for optional fields)
Fixes: #660
With kilobyte the resulting numbers got too large and were cut off
in the charts, making them useless. However, even an idle Akkoma
server’s memory usage is in the lower hundreths of megabytes, so
we don’t need this much precision to begin with for the dashboard.
Other metric users might prefer base units and can handle scaling in a
smarter way, so keep this configurable.
The spec was copied from another endpoint, including the operation id,
leading to scrubbing the valid parameters from the request and simply
not working.
the previous code passed a state parameter to ueberauth with info
about where to go after the user logged in, etc.
since ueberauth 0.7, this parameter is ignored and oauth state is used
for actual CSRF reasons.
we now set a cookie with the state we need to keep track of, and read
it once the callback happens.
Implements the preferences endpoint in the Mastodon API, but returns
default values for most of the preferences right now. The only supported
preference we can access is default post visibility, and a relevant test
is added as well.
Currently, Akkoma sorts by published date first before everything else.
This however makes search results pretty bad since Meilisearch uses a
bucket sort algorithm in order of the ranking rules specified:
https://www.meilisearch.com/docs/learn/core_concepts/relevancy#behavior
Since the `published` attribute is a unix timestamp, the resulting
buckets are pretty small so the other rules essentially have little to
no effect on the rankings of search results.
This fixes that issue by moving the `published:desc` rule further down
so it still sorts by date, but only after considering everything else.
AFAIK attribute and sort doesn't really affect results for Akkoma since
the only attribute considered is the `content` attribute and the `sort`
parameter isn't used in Akkoma searches. Everything else is made to
match more closely to Meilisearch's defaults.
OTP builds to 1.15
Changelog entry
Ensure policies are fully loaded
Fix :warn
use main branch for linkify
Fix warn in tests
Migrations for phoenix 1.17
Revert "Migrations for phoenix 1.17"
This reverts commit 6a3b2f15b7.
Oban upgrade
Add default empty whitelist
mix format
limit test to amd64
OTP 26 tests for 1.15
use OTP_VERSION tag
baka
just 1.15
Massive deps update
Update locale, deps
Mix format
shell????
multiline???
?
max cases 1
use assert_recieve
don't put_env in async tests
don't async conn/fs tests
mix format
FIx some uploader issues
Fix tests
Set it to `inline` because the vast majority of what's sent is multimedia
content while `attachment` would have the side-effect of triggering a
download dialog.
Closes: https://git.pleroma.social/pleroma/pleroma/-/issues/3114
TwitterCard meta tags are supposed to use the attributes "name" and "content".
OpenGraph tags use the attributes "property" and "content".
Twitter itself is smart enough to detect broken meta tags and discover the TwitterCard
using "property" and "content", but other platforms that only implement parsing of TwitterCards
and not OpenGraph may fail to correctly detect the tags as they're under the wrong attributes.
> "Open Graph protocol also specifies the use of property and content attributes for markup while
> Twitter cards use name and content. Twitter’s parser will fall back to using property and content,
> so there is no need to modify existing Open Graph protocol markup if it already exists." [0]
[0] https://developer.twitter.com/en/docs/twitter-for-websites/cards/guides/getting-started
`context` fields for objects and activities can now be generated based
on the object/activity `inReplyTo` field or its ActivityPub ID, as a
fallback method in cases where `context` fields are missing for incoming
activities and objects.
When doing prune_objects, it's possible that bookmarked objects are deleted.
This gave problems when fetching the bookmark TL.
Here we clean up the bookmarks during pruning in the case were it's possible that bookmarked objects are deleted.
This make the behavior consistent between when UserNote doesn't exist and when comment is null.
The current behavior may return null in APIs, which misleads some clients doing feature detection into thinking the server does not support comments.
For example, see https://codeberg.org/husky/husky/issues/92
weird values in href will cause base64 encoding to fail later down the
line, so let's make sure the value we're passing on is somewhat sane, or
at the very least a binary
this fixes#482
When no image description is filled in, Pleroma allowed fallbacks.
Those were (based on a setting) either the filename, or a fixed description.
Neither are good options for image descriptions imo, so here we remove this.
Note that there's two tests removed who supposedly tested something else.
But examining closer, they didn't seem to test what they claimed to test,
so I removed them rather than try to "fix" them.
Expose quote posting in the api as a feature.
Copies what the quote post PR for pleroma does to allow external clients to enable and disable features based on the feature-set of the instance.
As far as I am aware, akkoma doesn't allow you to disable quote posting, so this doesn't need anything fancy and it's just a hard on switch.
I tried to get one for the bubble tl to work also, but I'm not quite sure how to do it so that it switches off the feature when the bubble tl is disabled. I would argue that it could and ideally should be done as well though.
I also discovered a pretty tame bug in the testing of it, that deleting the DB entry for the bubble tl does not stop the bubble TL from actually working and it will continue to display the panel on the about page, I'll just leave it as a note here.
Reviewed-on: #496
Co-authored-by: foxing <foxing@noreply.akkoma>
Co-committed-by: foxing <foxing@noreply.akkoma>
E.g. Flag activities have an array of objects
We prune the activity when NONE of the objects can be found
Note that the cost of finding and deleting these is ~4x higher than finding and deleting the non-array ones
Only string:
Delete on activities (cost=506573.48..506580.38 rows=0 width=0)
Only Array:
Delete on activities (cost=3570359.68..4276365.34 rows=0 width=0)
(They are still executed separately, so the total cost is the sum of the two)
We add an option to also prune remote activities who don't have existing objects any more they reference.
Rn, we only check for activities who only reference one object, not an array or embeded object.
This adds an option to the prune_objects mix task.
The original way deleted all non-local public posts older than a certain time frame.
Here we add a different query which you can call using the option --keep-threads.
We query from the activities table all context id's where
1. the newest activity with this context is still old
2. none of the activities with this context is is local
3. none of the activities with this context is bookmarked
and delete all objects with these contexts.
The idea is that posts with local activities (posts, replies, likes, repeats...) may be interesting to keep.
Besides that, a post lives in a certain context (the thread), so we keep the whole thread as well.
Caveats:
* ~~Quotes have a different context. Therefore, when someone quotes a post, it's possible the quoted post will still be deleted.~~ fixed in #379
* Although undocumented (in docs/docs/administration/CLI_tasks/database.md/#prune-old-remote-posts-from-the-database), the 'normal' delete action still kept old remote non-public posts. I added an option to keep this behaviour, but this also means that you now have to explicitly provide that option. **This could be considered a breaking change!**
* ~~Note that this removes from the objects table, but not from the activities.~~ See #427 for that.
Some statistics from explain analyse:
(cost=1402845.92..1933782.00 rows=3810907 width=62) (actual time=2562455.486..2562455.495 rows=0 loops=1)
Planning Time: 505.327 ms
Trigger for constraint chat_message_references_object_id_fkey: time=651939.797 calls=921740
Trigger for constraint deliveries_object_id_fkey: time=52036.009 calls=921740
Trigger for constraint hashtags_objects_object_id_fkey: time=20665.778 calls=921740
Execution Time: 3287933.902 ms
***
**TODO**
1. [x] **Question:** Is it OK to keep it like this in regard to quote posts? If not (ie post quoted by local users should also be kept), should we give quotes the same context as the post they are quoting? (If we don't want to give them the same context, I'll have to see how/if I can do it without being too costly)
* See #379
2. [x] **Question:** the "original" query only deletes public posts (this is undocumented, but you can check the code). This new one doesn't care for scope. From the docs I get that the idea is that posts can be refetched when needed. But I have from a trusted source that Pleroma can't refetch non-public posts. I assume that's the reason why they are kept here. I see different options to deal with this
1. ~~We keep it as currently implemented and just don't care about scope with this option~~
2. ~~We add logic to not delete non-public posts either (I'll have to see how costly that becomes)~~
3. We add an extra --keep-non-public parameter. This is technically speaking breakage (you didn't have to provide a param before for this, now you do), but I'm inclined to not care much because it wasn't documented nor tested in the first place.
3. [x] See if we can do the query using Elixir
4. [x] Test on a bigger DB to see that we don't run into a timeout
5. [x] Add docs
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: #350
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
Some users post posts with spoofed timestamp, and some clients will have issues with certain dates. Tusky for example crashes if the date is any sooner than 1 BCE (“year zero” in the representation).
I limited the range of what is considered a valid date to be somewhere between the years 1583 and 9999 (inclusive).
The numbers have been chosen because:
- ISO 8601 only allows years before 1583 with “mutual agreement”
- Years after 9999 could cause issues with certain clients as well
Co-authored-by: Charlotte 🦝 Delenk <lotte@chir.rs>
Reviewed-on: #425
Co-authored-by: darkkirb <lotte@chir.rs>
Co-committed-by: darkkirb <lotte@chir.rs>
Faced with this issue today, Pleroma responds with status 400 (Bad request) if Exiftool.StripLocation is added to the list of filter modules for uploads. Here is logs:
```
13:27:25.201 [info] POST /api/v1/media
13:27:25.232 request_id=FzdspaAnrA6cyv0APgVR [error] Elixir.Pleroma.Upload.Filter: Filter Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation failed: {:error, "Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation: %ErlangError{original: :enoent}"}
13:27:25.232 request_id=FzdspaAnrA6cyv0APgVR [error] Elixir.Pleroma.Upload store (using Pleroma.Uploaders.Local) failed: "Elixir.Pleroma.Upload.Filter.Exiftool.StripLocation: %ErlangError{original: :enoent}"
```
# This fix solves this problem.
Reviewed-on: #421
Co-authored-by: ihor <ikandreew@gmail.com>
Co-committed-by: ihor <ikandreew@gmail.com>
See #350 (comment)
When making quotes through Mast-API, they will now have the same context as the quoted post. This also results in them being showed when fetching the thread. I checked Misskey to see how it's there, and they show the quotes there as well, see e.g. <https://mk.toast.cafe/notes/98u1g0tulg>.
An example from Akkoma:
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: #379
Reviewed-by: floatingghost <hannah@coffee-and-dreams.uk>
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
Argos Translate is a Python module for translation and can be used as a command line tool.
This is also the engine for LibreTranslate, for which we already have a module.
Here we can use the engine directly from our server without doing requests to a third party or having to install our own LibreTranslate webservice (obviously you do have to install Argos Translate).
One thing that's currently still missing from Argos Translate is auto-detection of languages (see <https://github.com/argosopentech/argos-translate/issues/9>). For now, when no source language is provided, we just return the text unchanged, supposedly translated from the target language. That way you get a near immediate response in pleroma-fe when clicking Translate, after which you can select the source language from a dropdown.
Argos Translate also doesn't seem to handle html very well. Therefore we give admins the option to strip the html before translating. I made this an option because I'm unsure if/how this will change in the future.
Co-authored-by: ilja <git@ilja.space>
Reviewed-on: #351
Co-authored-by: ilja <akkoma.dev@ilja.space>
Co-committed-by: ilja <akkoma.dev@ilja.space>
this didn't actually _do_ anything in the past,
the users would be prevented from accessing the resource,
but they shouldn't be able to even create them
Until now it was returning a 500 because the upload plug were going
through the changeset and ending in the JSON encoder, which raised
because struct has to @derive the encoder.
Objects who got updated would just pass through several of the MRF policies, undoing moderation in some situations.
In the relevant cases we now check not only for Create activities, but also Update activities.
I checked which ones checked explicitly on type Create using `grep '"type" => "Create"' lib/pleroma/web/activity_pub/mrf/*`.
The following from that list have not been changed:
* lib/pleroma/web/activity_pub/mrf/follow_bot_policy.ex
* Not relevant for moderation
* lib/pleroma/web/activity_pub/mrf/keyword_policy.ex
* Already had a test for Update
* lib/pleroma/web/activity_pub/mrf/object_age_policy.ex
* In practice only relevant when fetching old objects (e.g. through Like or Announce). These are always wrapped in a Create.
* lib/pleroma/web/activity_pub/mrf/reject_non_public.ex
* We don't allow changing scope with Update, so not relevant here
Objects who got updated would just pass the TagPolicy, undoing the moderation that was set in place for the Actor.
Now we check not only for Create activities, but also Update activities.
makes static-fe look more like pleroma-fe, with the stylesheets matching pleroma-dark and pleroma-light based on `prefers-color-scheme`.
- [x] navbar
- [x] about sidebar
- [x] background image
- [x] statuses
- [x] "reply to" or "edited" tags
- [x] accounts
- [x] show more / show less
- [x] posts / with replies / media / followers / following
- [x] followers/following would require user card snippets
- [x] admin/bot indicators
- [x] attachments
- [x] nsfw attachments
- [x] fontawesome icons
- [x] clean up and sort css
- [x] add pleroma-light
- [x] replace hardcoded strings
also i forgot
- [x] repeated headers
how it looks + sneak peek at statuses:
Co-authored-by: Sol Fisher Romanoff <sol@solfisher.com>
Reviewed-on: #236
Co-authored-by: sfr <sol@solfisher.com>
Co-committed-by: sfr <sol@solfisher.com>
